36 Steps to the Perfect Canon EOS M6 Mark II Setup

With a Canon EOS M6 Mark II in hand, it was time to set up the camera for use. Following are the 36 steps I took to make an out-of-the-box M6 II ready for use.

1. Open the box, find the battery and charger and plug it in. If you have another charged battery available, you can continue to the battery-required steps without a wait. Or, the supplied battery may have enough charge to take you through these steps if you can't wait.
2. While the battery is charging, unpack the other items you want from the box. For me, this is primarily the camera, the eye cup, and the neck strap
3. Install the latest Canon EOS Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, and Lens Registration Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert a sufficiently charged battery.
6. Power the camera on.
7. The date and time setup screen will show at startup the first time. Use the Rear Control dial and the Set button to update this information.
8. Insert a memory card (format them via the tools menu option before taking pictures).
9. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
10. Scroll through all of the menu tabs to configure the camera as follows:
11. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Rear Control dial to set JPEG to "-"
12. Shooting Menu, Tab 1: Image review: Off
13. Shooting Menu, Tab 2: ISO Speed Settings: ISO Speed range: 100-H (51200), Auto ISO Speed range: 100-25600
14. Shooting Menu, Tab 1: Lens aberration correction: All disabled (though I suggest leaving CA correction enabled for most uses - all can be applied to a RAW file in DPP)
15. Shooting Menu, Tab 4: White balance: AWB-W (Auto: White priority)
16. Shooting Menu, Tab 4: Picture Style: Neutral with Sharpness Strength set to "1" (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
17. Shooting Menu, Tab 3: High ISO speed noise reduction: Low or Off (noise reduction is destructive to image details - I prefer to add NR sparingly in post)
18. Shooting Menu, Tab 7: Eye Detection AF: Enable
19. Shooting Menu, Tab 7: Touch & drag AF settings: Touch and drag AF: Enable
20. Playback Menu, Tab 4: Playback information display: Leave options 1 and 2 (only) checked and press info to change option 2's histogram to RGB
21. Playback Menu, Tab 4: Highlight alert: Enable (flash portions of images that are overexposed)
22. Playback Menu, Tab 4: Playback grid: 3x3
23. Playback Menu, Tab 4: Magnificatn (apx): Actual size
24. Setup Menu, Tab 1: Auto rotate: On/Computer only (this provides the largest playback image size on the camera LCD)
25. Setup Menu, Tab 1: Mode guide: Disable
26. Setup Menu, Tab 1: Feature guide: Disable
27. Setup Menu, Tab 3: Beep: Disable
28. Tools Menu, Tab 4: Shooting info. display: Screen info. settings: Enable 1, 3, 4
29. Tools Menu, Tab 4: Shooting info. display: VF info/toggle setting: Enable 1 and 3
30. Tools Menu, Tab 4: Shooting info. display: Grid display: 3x3 (sometimes helpful for alignment checking)
31. Tools Menu, Tab 4: Shooting info. display: Histogram disp: RGB, Small (I want to see the brightness levels of each channel separately and don't want the graph to take up much space in the display)
32. Setup Menu, Tab 5: Custom shooting mode (C1-C3): Auto update set: Enable (see also: Configuring Custom Shooting Modes)
33. Setup Menu, Tab 5: Copyright information: Type name as desired
34. Custom Functions, Tab 1: C.Fn II :Autofocus: Orientation linked AF point: Separate AF pts: Pt only
35. My Menu: Add the first tab; Register the following options for Tab 1: Format card, Date/Time/Zone (great for monitoring what time it is), Sensor cleaning, Expo.comp./AEB
36. Mount a lens, focus on a subject and adjust the viewfinder diopter (if necessary)

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. IF your camera is reset-to-factory state for some reason, such as when being serviced, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. If you purchase another same or similar camera, you will be able to quickly set it up.

More Information

Canon EOS M6 Mark II

Order the Canon EOS M6 Mark II at B&H | Amazon | Adorama | WEX.