Sigma Firmware Updates RSS Feed for Sigma Firmware Updates

 Thursday, June 20, 2019
From Sigma:
 
This firmware corrected the phenomenon related with the selection range of AF frame (AF point) of the camera.
 
For customers who own the SIGMA USB DOCK and applicable product listed below, please update the firmware via SIGMA Optimization Pro. Before updating the firmware, please ensure SIGMA Optimization Pro has been updated to Ver.1.5.0 or later.
 
Applicable products
 
  • SIGMA 18-200mm F3.5-6.3 DC MACRO OS HSM | Contemporary for CANON EF
  • SIGMA 18-300mm F3.5-6.3 DC MACRO OS HSM | Contemporary for CANON EF
  • SIGMA 24mm F1.4 DG HSM | Art for CANON EF
Benefit of the update
 
  • It has corrected the phenomenon whereby the selection range of AF frame (AF point) becomes narrower depending on the camera attached.
SIGMA Optimization Pro Download page
 
Note: For those using any of the above lenses with the SIGMA MOUNT CONVERTER MC-11 EF-E, you'll need to update the mount converer's firmware to work with the lenses' new firmware.
Posted to: Canon News
Post Date: 6/20/2019 5:50:00 AM CT   Posted By: Sean
 Thursday, May 23, 2019
From Sigma:
 
SIGMA 120-300mm F2.8 DG OS HSM | Sports for CANON EF
 
This firmware corrects the phenomenon whereby it does not reflect the changes set by custom mode on SIGMA Optimization Pro.
 
For customers who own the SIGMA USB DOCK and applicable product listed below, please update the firmware via SIGMA Optimization Pro. Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver.1.5.0 or later.
 
Benefit of the update
 
  • It has corrected the phenomenon whereby it does not reflect the changes set by custom mode on SIGMA Optimization Pro.
SIGMA Optimization Pro Download page
 


SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E
 
This firmware makes the SIGMA MOUNT CONVERTER MC-11 compatible with the latest firmware of SIGMA interchangeable lenses, and improves the AF speed when it is used in combination with the SONY a9 or SONY a7 III and the SIGMA 135mm F1.8 DG HSM | Art.
 
For customers who own the SIGMA MOUNT CONVERTER MC-11, please update the firmware via SIGMA Optimization Pro by connecting it to a computer using the supplied USB Cable. Before updating the SIGMA MOUNT CONVERTER MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to Ver.1.5.0 or later.
 
Before attaching the updated SIGMA MOUNT CONVERTER MC-11 to the camera body, please remove the battery pack from the camera and put it back in again.
 
SIGMA MOUNT CONVERTER MC-11 SA-E
 
Benefit of the update
 
  • It has improved the AF speed when it is used in combination with the SONY a9 or SONY a7 III and the SIGMA 135mm F1.8 DG HSM | Art for SIGMA.
* For customers who own the SONY a9, please update the firmware of the camera to Ver.5.00 or later.
 
SIGMA MOUNT CONVERTER MC-11 EF-E
 
Benefits of the update
 
  • It has become compatible with the SIGMA 120-300mm F2.8 DG OS HSM | Sports for CANON EF mount, that has the latest firmware Ver.2.01.
  • It has improved the AF speed when it is used in combination with the SONY a9 or SONY a7 III and the SIGMA 135mm F1.8 DG HSM | Art for CANON EF mount.
* For customers who own the SONY a9, please update the firmware of the camera to Ver.5.00 or later.
 
SIGMA Optimization Pro Download page
 


SIGMA ELECTRONIC FLASH EF-630 for CANON and NIKON
 
This firmware makes the SIGMA ELECTRONIC FLASH EF-630 compatible with the full-frame mirrorless cameras released by Canon Inc. and Nikon Inc..
 
For customers who own the SIGMA FLASH USB DOCK FD-11 for CANON and NIKON and applicable products listed below, please update the firmware via SIGMA Optimization Pro.
 
SIGMA ELECTRONIC FLASH EF-630 for CANON
 
Benefits of the update
 
  • It has become compatible with the EOS R and EOS RP mirrorless cameras.
* To update the firmware, the SIGMA FLASH USB DOCK FD-11 for CANON mount which is updated to Ver.1.01 is required.
 
SIGMA ELECTRONIC FLASH EF-630 for NIKON
 
Benefits of the update
 
  • It has become compatible with the Z7 and Z6 mirrorless cameras.
  • It has corrected the phenomenon whereby it shows overexposure on the slave side when it is used for wireless shooting.
* To update the firmware, the SIGMA FLASH USB DOCK FD-11 for NIKON mount which is updated to Ver.1.01 is required.
 
Before updating the SIGMA ELECTRONIC FLASH EF-630 firmware, please ensure SIGMA Optimization Pro has been updated to Ver.1.5.0 or later from the download page below. The firmware update will take approximately 3 minutes to complete.
 
SIGMA Optimization Pro Download page
 
 Thursday, April 18, 2019
From Sigma:
 
For customers who own the SIGMA USB DOCK and applicable product listed below, please update the firmware via SIGMA Optimization Pro.
 


SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for CANON EF mount
 
Benefit of the update
 
  • It has improved the stability of the image in the viewfinder, making it easier to confirm composition, thanks to the updated control algorithm of the Optical Stabilizer.


SIGMA 135mm F1.8 DG HSM | Art for CANON EF mount
 
Benefit of the update
 
  • When the lens is used in combination with the Canon “EOS R” and their “Mount Adapter EF-EOS R”, or “Control Ring Mount Adapter EF-EOS R”, it has corrected the phenomenon whereby it may occasionally show overexposure when narrowing down the aperture from F3.5 while shooting.


B&H carries the Sigma 100-400mm F5-6.3 DG OS HSM | Contemporary and SIGMA 135mm F1.8 DG HSM lenses.
Posted to: Canon News
Post Date: 4/18/2019 6:40:52 AM CT   Posted By: Sean
From Sigma:
 
For customers who own the SIGMA USB DOCK and applicable product listed below, please update the firmware via SIGMA Optimization Pro.
 
Sigma 100-400mm F5-6.3 DG OS HSM | Contemporary for Nikon F mount
 
Benefit of the update (v.1.03)
 
  • It has improved the stability of the image in the viewfinder, making it easier to confirm composition, thanks to the updated control algorithm of the Optical Stabilizer.
B&H carries the Sigma 100-400mm F5-6.3 DG OS HSM | Contemporary Lens.
Posted to: Nikon News
Post Date: 4/18/2019 6:33:24 AM CT   Posted By: Sean
 Thursday, March 14, 2019
From Sigma:
 
Firmware update for SIGMA’s interchangeable lenses for CANON EF mount
 
Thank you for purchasing and using our products. We would like to announce that a new firmware update for SIGMA’s interchangeable lenses for CANON EF mount listed below is now available.
 
This firmware allows compatibility with Canon’s in-camera Lens Aberration Correction function to enable correction matching the optical characteristics of each lens. It also corrects the phenomenon that abnormal images appear or operation errors occur when the function is enabled. In addition, it improves the functionality. Furthermore, there is an improvement to the phenomena particular to some lenses when they are used in combination with the Canon “EOS R” and their “Mount Adapter EF-EOS R”, or “Control Ring Mount Adapter EF-EOS R”. This was previously reported in our announcement of January 16th, 2019.
 
For customers who own the SIGMA USB DOCK and applicable products listed below, please update the firmware via SIGMA Optimization Pro. Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver. 1.5.0. or later..
 
SIGMA 30mm F1.4 DC HSM | Art for CANON EF Mount Update
 
  • It has ensured compatibility with Canon’s in-camera Lens Aberration Correction function, which enables correction matching the optical characteristics of the attached lens. *
  • It has corrected the phenomenon that abnormal images appear or operation errors occur when Canon’s in-camera Lens Aberration Correction function is enabled.
  • It has improved the AF accuracy when the lens is used with Live-View mode.
  • When the lens is used in combination with the Canon “EOS R” and their “Mount Adapter EF-EOS R”, or “Control Ring Mount Adapter EF-EOS R”, it has become compatible with EOS R’s “1.6x (Crop)” to be set automatically as well as with “Scene Intelligent Auto Mode”.
SIGMA 24-70mm F2.8 DG OS HSM | Art for CANON EF Mount Update
 
  • When the lens is used in combination with the Canon “EOS R” and their “Mount Adapter EF-EOS R”, or “Control Ring Mount Adapter EF-EOS R”, it has corrected the phenomenon whereby restarting the camera does not work when the lens is taken off the camera while the lens’s OS function is in operation.
  • When the lens is used in combination with the Canon “EOS R” and their “Mount Adapter EF-EOS R”, or “Control Ring Mount Adapter EF-EOS R”, it has corrected the phenomenon whereby it may stop the focus driving from infinity to closer focus distance while shooting video with AF.
  • When the lens is used in combination with the Canon “EOS R” and their “Mount Adapter EF-EOS R”, or “Control Ring Mount Adapter EF-EOS R”, it has corrected the phenomenon whereby it may occasionally show overexposure when narrowing down the aperture from F8 while shooting.
SIGMA 60-600mm F4.5-6.3 DG OS HSM | Sports for CANON EF Mount Update
 
  • When the lens is used in combination with the Canon “EOS R” and their “Mount Adapter EF-EOS R”, or “Control Ring Mount Adapter EF-EOS R”, it has corrected the phenomenon whereby restarting the camera does not work when the lens is taken off the camera while the lens’s OS function is in operation.
SIGMA 120-300mm F2.8 DG OS HSM | Sports for CANON EF Mount Update
 
  • It has ensured compatibility with Canon’s in-camera Lens Aberration Correction function, which enables correction matching the optical characteristics of the attached lens. *
  • It has corrected the phenomenon that abnormal images appear or operation errors occur when Canon’s in-camera Lens Aberration Correction function is enabled.
  • It has improved the AF accuracy when the lens is used with the SIGMA MOUNT CONVERTER MC-11 EF-E.
SIGMA 150-600mm F5-6.3 DG OS HSM | Contemporary for CANON EF Mount Update
 
  • It has improved the stability of the image in the viewfinder, making it easier to confirm composition, thanks to the updated control algorithm of the Optical Stabilizer.
SIGMA 85mm F1.4 DG HSM | Art for CANON EF Mount Update
 
  • When the lens is used in combination with the Canon “EOS R” and their “Mount Adapter EF-EOS R”, or “Control Ring Mount Adapter EF-EOS R”, it has corrected the phenomenon whereby it may occasionally show overexposure when narrowing down the aperture from F8 while shooting.
* Compatible Canon camera models:EOS R**, EOS-1DX mark II, EOS 5Ds,EOS 5DsR, EOS 5D Mark IV, EOS 6D mark II, EOS 80D, EOS 8000D(EOS Rebel T6s, EOS 760D), EOS 9000D(EOS 77D), EOS Kiss x8i(EOS Rebel T6i, EOS 750D), EOS Kiss x9i(EOS Rebel T7i, EOS 800D), EOS Kiss x9(EOS Rebel SL2, EOS 200D)
 
** When the Digital Lens Optimizer is switched [OFF], but "Peripheral illumination correction", "Chromatic aberration correction" and "Distortion correction", located within the in-camera Lens Aberration Correction function is switched [ON], the appropriate corrections can be achieved in accordance with the optical characteristics of each lens.
 


SIGMA Mount Converter MC-11 EF-E Update
 
  • It has optimized the peripheral illumination correction data when it is used in combination with the SIGMA 18-300mm F3.5-6.3 DC MACRO OS HSM | Contemporary for Canon EF mount.
  • It has become compatible with the SIGMA 30mm F1.4 DC HSM | Art for CANON EF mount, that has the latest firmware Ver.2.00.
  • It has become compatible with the SIGMA 24-70mm F2.8 DG OS HSM | Art for CANON EF mount, that has the latest firmware Ver.2.03.
  • It has become compatible with the SIGMA 60-600mm F4.5-6.3 DG OS HSM | Sports for CANON EF mount, that has the latest firmware Ver.1.01.
  • It has become compatible with the SIGMA 120-300mm F2.8 DG OS HSM | Sports for CANON EF mount, that has the latest firmware Ver.2.00.
  • It has become compatible with the SIGMA 150-600mm F5-6.3 DG OS HSM | Contemporary for CANON EF mount, that has the latest firmware Ver.2.01.
  • It has become compatible with the SIGMA 85mm F1.4 DG HSM | Art for CANON EF mount, that has the latest firmware Ver.2.02.
  • It has improved the compensation effect when it is used in combination with the Sony a9, Sony a7III and specific lenses*, and their in-camera image stabilization adjustment is set to AUTO. It has been set to achieve the same effect as when it is adjusted manually.
  • It has improved the accuracy of exposure when it is used with dedicated flashes manufactured by SONY.


SIGMA 150-600mm F5-6.3 DG OS HSM | Contemporary for NIKON F Mount Update
 
  • It has improved the stability of the image in the viewfinder, making it easier to confirm composition, thanks to the updated control algorithm of the Optical Stabilizer.
Download: SIGMA Optimization Pro
 
B&H carries the Sigma USB Dock.
Post Date: 3/14/2019 7:06:41 AM CT   Posted By: Sean
 Thursday, February 21, 2019
From Sigma:
 
Operating conditions of the Nikon “Z 6” and SIGMA’s interchangeable lenses for NIKON F mount, and firmware update for SIGMA 24-70mm F2.8 DG OS HSM | Art for NIKON F mount
 
Thank you for purchasing and using our products. We would like to announce that the operating conditions of SIGMA’s interchangeable lenses for NIKON F mount on the Nikon “Z 6” and their “Mount Adapter FTZ” are the same as when they are used in combination with the Nikon “Z 7” and their “Mount Adapter FTZ” that we announced on October 26th, 2018.
 
Furthermore, we would like to announce that a new firmware update for SIGMA 24-70mm F2.8 DG OS HSM | Art for NIKON F mount improves on the phenomenon particular to the lens when it is used in combination with the Nikon “Z 7” or “Z 6” and their “Mount Adapter FTZ”.
 
For customers who own the SIGMA USB DOCK and applicable product listed below, please update the firmware via SIGMA Optimization Pro. Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver. 1.5.0 or later.
 
Applicable product
 
  • SIGMA 24-70mm F2.8 DG OS HSM | Art for NIKON F mount
Benefit of the update
 
  • When the lens is used in combination with the Nikon “Z 7” or “Z 6” and their “Mount Adapter FTZ”, it has corrected the phenomenon whereby it may occasionally show overexposure when narrowing down the aperture from F5.6 while shooting.
SIGMA Optimization Pro Download
 


Firmware update for SIGMA MOUNT CONVERTER MC-11 EF-E
 
Thank you for purchasing and using our products. We are pleased to announce that a firmware update for the SIGMA MOUNT CONVERTER MC-11 EF-E is now available.
 
This firmware makes the SIGMA MOUNT CONVERTER MC-11 compatible with the latest firmware of SIGMA interchangeable lenses. For customers who own the SIGMA MOUNT CONVERTER MC-11 EF-E, please update the firmware via SIGMA Optimization Pro? by connecting it to a computer using the supplied USB Cable.
 
Before updating the SIGMA MOUNT CONVERTER MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.5.0 or later.
 
Applicable product
 
  • SIGMA MOUNT CONVERTER MC-11 EF-E
Benefit of the update
 
  • It has become compatible with the 17-70mm F2.8-4 DC MACRO OS HSM | Contemporary for CANON EF mount, that has the latest firmware Ver.2.01.
  • It has become compatible with the SIGMA 18-200mm F3.5-6.3 DC MACRO OS HSM | Contemporary for CANON EF mount, that has the latest firmware Ver.2.01.
  • It has become compatible with the SIGMA 18-35mm F1.8 DC HSM | Art for CANON EF mount, that has the latest firmware Ver.2.02.
  • It has become compatible with the SIGMA 50-100mm F1.8 DC HSM | Art for CANON EF mount, that has the latest firmware Ver.2.02.
  • It has become compatible with the SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for CANON EF mount, that has the latest firmware Ver.2.04.
SIGMA Optimization Pro Download
 Thursday, January 24, 2019
From Sigma:
 
Thank you for purchasing and using our products.
 
We would like to announce that a new firmware update for SIGMA’s interchangeable lenses for CANON EF mount listed below is now available.
 
This firmware allows compatibility with Canon’s in-camera Lens Aberration Correction function to enable correction matching the optical characteristics of each lens. It also corrects the phenomenon that abnormal images appear or operation errors occur when the function is enabled. In addition, it improves the functionality. Furthermore, phenomena particular to some lenses when they are used in combination with the Canon “EOS R” and their “Mount Adapter EF-EOS R” or “Control Ring Mount Adapter EF-EOS R” that we announced on January 16th, 2019 are also improved on by this firmware.
 
For customers who own the SIGMA USB DOCK and applicable products listed below, please update the firmware via SIGMA Optimization Pro.*
 
* Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver. 1.5.0. or later.
 
SIGMA 24-35mm F2 DG HSM | Art for CANON EF mount
 
Benefits of the update:
 
  • It has ensured compatibility with Canon’s in-camera Lens Aberration Correction function, which enables correction matching the optical characteristics of the attached lens.*
  • It has corrected the phenomenon that abnormal images appear or operation errors occur when Canon’s in-camera Lens Aberration Correction function is enabled.
SIGMA 500mm F4 DG OS HSM | Sports for CANON EF mount
 
Benefits of the update:
 
  • It has ensured compatibility with Canon’s in-camera Lens Aberration Correction function, which enables correction matching the optical characteristics of the attached lens.*
  • It has corrected the phenomenon that abnormal images appear or operation errors occur when Canon’s in-camera Lens Aberration Correction function is enabled.
  • It has improved the AF speed when the lens is used in combination with some cameras.
SIGMA 18-300 mm F3.5-6.3 DC MACRO OS HSM | Contemporary for CANON EF mount
 
Benefits of the update:
 
  • It has ensured compatibility with Canon’s in-camera Lens Aberration Correction function, which enables correction matching the optical characteristics of the attached lens.*
  • It has corrected the phenomenon that abnormal images appear or operation errors occur when Canon’s in-camera Lens Aberration Correction function is enabled.
  • It has become compatible with EOS R’s “1.6x (Crop)” to be set automatically as well as with “Scene Intelligent Auto Mode”.
* Compatible Canon camera models:EOS R1, EOS-1D X mark II, EOS 5Ds, EOS 5Ds R, EOS 5D mark IV, EOS 6D mark II, EOS 80D, EOS 8000D(EOS Rebel T6s, EOS 760D), EOS 9000D(EOS 77D) , EOS Kiss x8i(EOS Rebel T6i, EOS 750D), EOS Kiss x9i(EOS Rebel T7i, EOS 800D), EOS Kiss x9(EOS Rebel SL2, EOS 200D)
 
1 When the Digital Lens Optimizer is switched [OFF], but “Peripheral illumination correction”, “Chromatic aberration correction” and “Distortion correction”, located within the in-camera Lens Aberration Correction function is switched [ON], the appropriate corrections can be achieved in accordance with the optical characteristics of each lens.
 
Download: Sigma Optimization Pro
 


We would like to announce that a new firmware update for SIGMA’s interchangeable lenses for NIKON F mount listed below is now available.
 
Phenomena particular to some lenses when they are used in combination with the Nikon “Z 7” and their “Mount Adapter FTZ” that we announced on October 26th, 2018 are improved on by this firmware.
 
For customers who own the SIGMA USB DOCK and applicable product listed below, please update the firmware via SIGMA Optimization Pro*
 
* Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver. 1.5.0. or later.
 
SIGMA 24-35mm F2 DG HSM | Art for NIKON F mount
 
Benefit of the update:
 
  • When the lens is used in combination with the Nikon “Z 7” and their “Mount Adapter FTZ”, it has corrected the phenomenon whereby it may occasionally stop recording while shooting video.
SIGMA 50mm F1.4 DG HSM | Art for NIKON F mount
 
Benefit of the update:
 
  • When the lens is used in combination with the Nikon “Z 7” and their “Mount Adapter FTZ”, it has corrected the phenomenon whereby the response to the AF operation is intermittent when starting to shoot with the subject completely out of focus.
SIGMA 85mm F1.4 DG HSM | Art & SIGMA 135mm F1.8 DG HSM | Art for NIKON F mount
 
Benefit of the update:
 
  • When the lens is used in combination with the Nikon “Z 7” and their “Mount Adapter FTZ”, it has corrected the phenomenon whereby it may occasionally show overexposure when narrowing down the aperture from F5.6 while shooting.
Download: Sigma Optimization Pro
 


We are pleased to announce that a firmware update for the SIGMA MOUNT CONVERTER MC-11 SA-E and EF-E is now available. This firmware makes the SIGMA MOUNT CONVERTER MC-11 compatible with the latest firmware of SIGMA interchangeable lenses. For customers who own the SIGMA MOUNT CONVERTER MC-11, please update the firmware via SIGMA Optimization Pro* by connecting it to a computer using the supplied USB Cable.
 
* Before updating the SIGMA MOUNT CONVERTER MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.5.0 or later.
 
SIGMA MOUNT CONVERTER MC-11 SA-E
 
Benefit of the update:
 
  • It has become compatible with the SIGMA 28mm F1.4 DG HSM | Art for SIGMA.
SIGMA MOUNT CONVERTER MC-11 EF-E
 
Benefits of the update:
 
  • It has become compatible with the SIGMA 500mm F4 DG OS HSM | Sports for CANON EF mount, that has the latest firmware Ver.2.00.
  • It has become compatible with the SIGMA 24-35mm F2 DG HSM | Art for CANON EF mount, that has the latest firmware Ver.2.00.
  • It has become compatible with the SIGMA 18-300mm F3.5-6.3 DC MACRO OS HSM | Contemporary for CANON EF mount, that has the latest firmware Ver.2.00.
  • It has become compatible with the SIGMA 28mm F1.4 DG HSM | Art for CANON EF mount.
  • It has become compatible with the SIGMA CINE LENS FF High Speed Prime Line 28mm T1.5 FF for CANON EF mount and 40mm T1.5 FF for CANON EF mount.
Download: Sigma Optimization Pro
Post Date: 1/24/2019 6:34:59 AM CT   Posted By: Sean
 Thursday, December 20, 2018
From Sigma:
 
Benefit of the update
 
  • It has corrected the phenomenon whereby Clear Image Zoom function incorporated in the camera cannot be used.
Download: Sigma 70mm f/2.8 DG MACRO Art for Sony E Firmwae v.02 - Windows | Macintosh
Posted to: Sony News
Post Date: 12/20/2018 12:03:45 PM CT   Posted By: Sean
 Thursday, November 29, 2018
Sigma has released firmware update for its Mount Converter MC-11 EF-E and MC-11 SA-E that provides compatibility with the Sigma 70-200mm f/2.8 DG OS HSM | Sports Lens.
 
From Sigma:
 
Mount Converter MC-11 Firmware v.1.20 (EF-E) & 1.14 (SA-E)*
 
  • It has become compatible with the SIGMA 70-200mm F2.8 DG OS HSM | Sports.
* Before updating the SIGMA MOUNT CONVERTER MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh.
 
B&H carries the Sigma 70-200mm f/2.8 DG OS HSM | Sports Lens.
Posted to: Canon News
Post Date: 11/29/2018 5:46:39 AM CT   Posted By: Sean
 Saturday, November 3, 2018
From Sigma:
 
Firmware update for the SIGMA 17-70mm F2.8-4 DC MACRO OS HSM | Contemporary for Canon & SIGMA 18-200mm F3.5-6.3 DC MACRO OS HSM | Contemporary for Canon
 
Thank you for purchasing and using our products.
 
We would like to announce that a new firmware update for the SIGMA 17-70mm F2.8-4 DC MACRO OS HSM | Contemporary for Canon and SIGMA 18-200mm F3.5-6.3 DC MACRO OS HSM | Contemporary for Canon is now available.
 
This firmware allows compatibility with Canon’s in-camera Lens Aberration Correction function to enable correction matching the optical characteristics of each lens. It also corrects the phenomenon that abnormal images appear or operation errors occur when the function is enabled.
 
For customers who own the SIGMA USB DOCK and applicable product listed below, please update the firmware via SIGMA Optimization Pro*.
 
* Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver. 1.4.1 or later for Windows, and Ver. 1.4.0 or later for Macintosh.
 
For customers who do not own the SIGMA USB DOCK, SIGMA performs lens firmware updates free of charge. For further information, please contact your nearest authorized SIGMA subsidiary/distributor.
 
Applicable product
 
  • SIGMA 17-70mm F2.8-4 DC MACRO OS HSM | Contemporary for Canon
  • SIGMA 18-200mm F3.5-6.3 DC MACRO OS HSM | Contemporary for Canon
Benefits of the update
 
  • It has ensured compatibility with Canon’s in-camera Lens Aberration Correction function, which enables correction matching the optical characteristics of the attached lens. **
  • It has corrected the phenomenon that abnormal images appear or operation errors occur when Canon’s in-camera Lens Aberration Correction function is enabled.
** EOS-1DX mark II, EOS 5Ds, EOS 5DsR, EOS 5D mark IV, EOS 6D mark II, EOS 80D, EOS 8000D (EOS Rebel T6s, EOS 760D), EOS 9000D (EOS 77D), EOS Kiss X8i (EOS Rebel T6i, EOS 750D), EOS Kiss X9i (EOS Rebel T7i, EOS 800D), EOS Kiss X9 (EOS Rebel SL2, EOS 200D)
 
B&H carries the following:
 
Post Date: 11/3/2018 9:27:52 AM CT   Posted By: Sean
 Tuesday, October 16, 2018
From SIGMA:
 
This firmware update makes the SIGMA MOUNT CONVERTER MC-11 EF-E compatible with the latest SIGMA interchangeable lenses firmware. For customers who own the SIGMA MOUNT CONVERTER MC-11 EF-E, please update the firmware via SIGMA Optimization Pro* by connecting it to a computer using the supplied USB Cable.
 
*Before updating the SIGMA MOUNT CONVERTER MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh.
 
Applicable product
 
  • SIGMA MOUNT CONVERTER MC-11 EF-E
Benefits of the update
 
  • It has become compatible with the SIGMA 105mm T1.5 FF EF mount Cine lens from the FF High Speed Prime Line.
  • It has become compatible with the SIGMA 24-105mm F4 DG OS HSM | Art for Canon which has the latest firmware Ver.2.00.
Post Date: 10/16/2018 6:18:52 AM CT   Posted By: Sean
From SIGMA:
 
This firmware allows compatibility with Canon’s in-camera Lens Aberration Correction function to enable correction matching the optical characteristics of each lens. It also corrects the phenomenon that abnormal images appear or operation errors occur when the function is enabled.
 
For customers who own the SIGMA USB DOCK and applicable product listed below, please update the firmware via SIGMA Optimization Pro*.
 
*Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver.1.4.1 or later for Windows, and Ver.1.4.0 or later for Macintosh.
 
Applicable product
 
  • SIGMA 24-105mm f/4 DG OS HSM | Art for Canon
Benefits of the update
 
  • It has ensured compatibility with Canon’s in-camera Lens Aberration Correction function, which enables correction matching the optical characteristics of the attached lens. **
  • It has corrected the phenomenon that abnormal images appear or operation errors occur when Canon’s in-camera Lens Aberration Correction function is enabled.
**Compatible Canon camera models: EOS-1DX mark II, EOS 5Ds, EOS 5DsR, EOS 5D mark ?, EOS 6D mark II, EOS 80D, EOS 8000D(EOS Rebel T6s, EOS 760D), EOS 9000D(EOS 77D), EOS Kiss X8i(EOS Rebel T6i, EOS 750D), EOS Kiss X9i(EOS Rebel T7i, EOS 800D), EOS Kiss X9(EOS Rebel SL2, EOS 200D)
Posted to: Canon News
Post Date: 10/16/2018 6:10:16 AM CT   Posted By: Sean
 Tuesday, October 2, 2018
From Sigma:
 
Thank you for purchasing and using our products.
 
We are pleased to announce that a new firmware update for the SIGMA MOUNT CONVERTER MC-11 SA-E and EF-E is now available.
 
This firmware makes the SIGMA MOUNT CONVERTER MC-11 compatible with the latest firmware of SIGMA interchangeable lenses. For customers who own the SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E, please update the firmware via SIGMA Optimization Pro by connecting it to a computer using the supplied USB Cable. Before updating the SIGMA MOUNT CONVERTER MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh.
 
Applicable product
 
  • SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E
Benefits of the update
 
  • It has become compatible with the SIGMA 60-600mm F4.5-6.3 DG OS HSM | Sports.
  • It has become compatible with the SIGMA 24-70mm F2.8 DG OS HSM | Art (For SIGMA: Ver.1.03, For Canon: Ver.2.02).
Post Date: 10/2/2018 1:04:38 PM CT   Posted By: Sean
From Sigma: Thank you for purchasing and using our products.
 
We would like to announce that a new firmware update for the SIGMA 24-70mm F2.8 DG OS HSM | Art for SIGMA, Canon and Nikon is now available
 
This firmware update improves the stability of the image in the viewfinder, making it easier to confirm composition.
 
For customers who own the SIGMA USB DOCK and applicable product listed below, please update the firmware via SIGMA Optimization Pro. Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver.1.4.1 or later for Windows, and Ver.1.4.0 or later for Macintosh.
 
Applicable product
 
  • SIGMA 24-70mm F2.8 DG OS HSM | Art for SIGMA, Canon and Nikon
Benefit of the update
 
  • It has improved the stability of the image in the viewfinder, making it easier to confirm composition, thanks to the updated control algorithm of the Optical Stabilizer.
Post Date: 10/2/2018 8:51:17 AM CT   Posted By: Sean
 Monday, September 10, 2018
From Sigma:
 
SIGMA 50-100mm F1.8 DC HSM | Art for SIGMA (v.1.01) and Canon (v.2.01)
This firmware corrects the phenomenon that the AF performance occasionally becomes unstable when used via SIGMA MOUNT CONVERTER MC-11.
SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for Canon (v.2.03)
This firmware improves the AF speed in certain combinations with some cameras.
Firmware update for SIGMA 150-600mm F5-6.3 DG OS HSM | Sports (v.2.00) / Contemporary for Canon (v.2.00)
This firmware allows compatibility with Canon’s in-camera Lens Aberration Correction function to enable correction matching the optical characteristics of each lens*. It also corrects the phenomenon that abnormal images appear or operation errors occur when the function is enabled. This firmware also improves the AF speed in certain combinations with some cameras.
 
* Compatible Canon camera models: EOS-1DX Mark II, EOS 5Ds, EOS 5DsR, EOS 5D Mark IV, EOS 6D mark II, EOS 80D, EOS 8000D (EOS Rebel T6s, EOS 760D), EOS 9000D (EOS 77D), EOS Kiss X8i (EOS Rebel T6i, EOS 750D), EOS Kiss X9i (EOS Rebel T7i, EOS 800D), EOS Kiss X9 (EOS Rebel SL2, EOS 200D)
For customers who own the SIGMA USB DOCK and applicable products, please update the firmware via SIGMA Optimization Pro.
 
Sigma USB Dock: B&H | Adorama | Amazon
Posted to: Canon News
Post Date: 9/10/2018 7:26:47 AM CT   Posted By: Sean
 Friday, July 13, 2018
From Sigma:
 
Thank you for purchasing and using our products. We would like to announce that a firmware update for the SIGMA MOUNT CONVERTER MC-11 EF-E is now available.
 
This firmware update makes the SIGMA MOUNT CONVERTER MC-11 EF-E compatible with the latest firmware of existing SIGMA interchangeable lenses. For customers who own the SIGMA MOUNT CONVERTER MC-11 EF-E, please update the firmware via SIGMA Optimization Pro? by connecting it to a computer using the supplied USB Cable. Before updating the MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh from the following download page.
 
Applicable Product
 
  • SIGMA MOUNT CONVERTER MC-11 EF-E
Benefits of the Update
 
  • It has become compatible with the following SIGMA interchangeable lenses for Canon that have the latest firmware Ver.2.00*.
  • It has become compatible with the SIGMA 14-24mm F2.8 DG HSM | Art for Canon with firmware Ver.1.01.
  • It has become compatible with the SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for Canon with firmware Ver.2.02.
* SIGMA 14mm F1.8 DG HSM | Art?SIGMA 20mm F1.4 DG HSM | Art?SIGMA 24mm F1.4 DG HSM | Art?SIGMA 12-24mm F4 DG HSM | Art?SIGMA 50-100mm F1.8 DC HSM | Art
 
Download: SIGMA Optimization Pro
Post Date: 7/13/2018 6:59:58 AM CT   Posted By: Sean
From Sigma:
 
This firmware allows compatibility with Canon’s in-camera Lens Aberration Correction function to enable correction matching the optical characteristics of each lens. It also corrects the phenomenon that abnormal images appear or operation errors occur when the function is enabled. This firmware also corrects the phenomenon whereby the continuous shooting speed decreases in certain combinations with some cameras when used with the 14-24mm F2.8 DG HSM | Art for Canon, and the phenomenon whereby the AF speed occasionally becomes unstable when used with the 100-400mm F5-6.3 DG OS HSM | Contemporary for Canon.
 
For customers who own the SIGMA USB DOCK and applicable products listed below, please update the firmware via SIGMA Optimization Pro. Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver. 1.4.1 or later for Windows, and Ver. 1.4.0 or later for Macintosh.
 
Applicable Products
 
  • SIGMA 14mm F1.8 DG HSM | Art for CANON
  • SIGMA 20mm F1.4 DG HSM | Art for CANON
  • SIGMA 24mm F1.4 DG HSM | Art for CANON
  • SIGMA 12-24mm F4 DG HSM | Art for CANON
  • SIGMA 50-100mm F1.8 DC HSM | Art for CANON
Benefits of the Update
 
  • It has ensured compatibility with Canon’s in-camera Lens Aberration Correction function, which enables correction matching the optical characteristics of the attached lens.*
  • It has corrected the phenomenon that abnormal images appear or operation errors occur when Canon’s in-camera Lens Aberration Correction function is enabled.
* Compatible Canon camera models:EOS-1DX mark II, EOS 5Ds, EOS 5Ds R, EOS 5D mark IV, EOS 6D mark II, EOS 80D, EOS 8000D(EOS Rebel T6s, EOS 760D), EOS 9000D(EOS 77D) , EOS Kiss x8i(EOS Rebel T6i, EOS 750D), EOS Kiss x9i(EOS Rebel T7i, EOS 800D), EOS Kiss x9(EOS Rebel SL2, EOS 200D)
 


Applicable Product
 
  • SIGMA 14-24mm F2.8 DG HSM | Art for CANON
Benefits of the Update
 
  • It has corrected the phenomenon whereby the continuous shooting speed decreases in certain combinations with some cameras.


Applicable Product
 
  • SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary CANON
Benefit of the Update
 
  • It has corrected the phenomenon whereby the AF speed occasionally becomes unstable.
Download: SIGMA Optimization Pro
 
Sigma USB DockB&H | Adorama
Posted to: Canon News
Post Date: 7/13/2018 6:50:00 AM CT   Posted By: Sean
 Wednesday, June 13, 2018
Sigma has released firmware updates for the Sigma Mount Converter MC-11 and 8 Lenses as follows:
 
Mount Converter MC-11
Now compatible with the Sigma 70mm f/2.8 DG Macro Lens and the Sigma 105mm f/1.4 DG HSM Lens.
 
Sigma 18-35mm f/1.8 DC HSM Art Lens
Now Compatible with Sigma Mount Converter MC-11.
 
Sigma 24-70mm f/2.8 DG OS HSM Art Lens
"It has corrected the phenomenon that the Manual Override (MO) function will be disabled after adjusting the settings of focus mode switch on SIGMA Optimization Pro (Macintosh ver.). "
 
Sigma 35mm f/1.4 DG HSM Art Lens
Now Compatible with Sigma Mount Converter MC-11.
 
Sigma 50mm f/1.4 DG HSM Art Lens
Now Compatible with Sigma Mount Converter MC-11.
 
Sigma 85mm f/1.4 DG HSM Art Lens
"It has corrected the phenomenon that the continuous shooting speed of some SIGMA interchangeable lenses with firmware Ver.2.00 decreases in certain combinations with some cameras. "
 
Sigma 135mm f/1.8 DG HSM Art Lens
"It has corrected the phenomenon that the continuous shooting speed of some SIGMA interchangeable lenses with firmware Ver.2.00 decreases in certain combinations with some cameras. "
 
Sigma 100-400mm f/5-6.3 DG OS HSM C Lens
"It has corrected the phenomenon that the Manual Override (MO) function will be disabled after adjusting the settings of focus mode switch on SIGMA Optimization Pro (Macintosh ver.)."
 
Sigma EF-630 Flash
"It has corrected the phenomenon where it occasionally stops communicating after recovering from Auto Power Off."
 
 
For the lenses, updating firmware is as easy as plugging in the Sigma Dock, mounting the lens and running the Sigma software.
Post Date: 6/13/2018 9:25:47 AM CT   Posted By: Bryan
 Wednesday, March 14, 2018
Last week, we reported that Sigma had released firmware updates for several of its Global Vision-series lenses. The updates was designed to allow compatibility with Canon’s in-camera Lens Aberration Correction. However, it seems the updates may have had unintended consequences.
 
A site visitor noticed that after updating his Sigma 50mm f/1.4 Art lens' firmware to v.2.00, his lens exhibited noticeable backfocusing which required a -8 setting at various focus settings to correct via the Sigma USA Dock.
 
As I had yet to update my own Sigma 50mm Art's firmware, I decided to see if I replicate the issue. I tested the lens' performance on my 5D Mark III and 7D Mark II and the lens focused accurately with no AFMA value applied in-camera or in-lens (via the USB dock) with firmware v.1.00. After updating Sigma Optimization Pro to the latest version, I upgraded the Sigma 50A's firmware to v.2.00. After the upgrade, the lens required a -6 AFMA correction to be applied either in-camera or in-lens (at all focus distances) for accurate autofocusing.
 
Note that the Sigma 50mm Art lens' AF was advertised as being adjusted in its specific firmware release notes for "an improved focus accuracy during Live View mode."
 
We're interested to know whether or not the AF recalibration is necessary for all of the lenses whose firmwares were updated, or if it's only the Sigma 50mm Art that's experiencing the issue. So if you have one of the following lenses and you'd like to provide your feedback, apply the latest firmware update and let us know if your lens required recalibration for accurate AF.
 
  • SIGMA 35mm F1.4 DG HSM | Art Canon
  • SIGMA 50mm F1.4 DG HSM | Art Canon
  • SIGMA 85mm F1.4 DG HSM | Art Canon
  • SIGMA 135mm F1.8 DG HSM | Art Canon
  • SIGMA 18-35mm F1.8 DC HSM | Art Canon
  • SIGMA 24-70mm F2.8 DG OS HSM | Art Canon
  • SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary Canon
Let us know how it goes in the comments.
Post Date: 3/14/2018 12:51:53 PM CT   Posted By: Sean
 Wednesday, March 7, 2018
From Sigma:
 
This firmware update makes the SIGMA MOUNT CONVERTER MC-11 compatible with the new product as well as the latest firmware of SIGMA interchangeable lenses for Canon. It improves AF performance in the peripheral areas of the image as well as when the “Eye AF” function is selected. It also improves operation when some lenses that are not compatible with the MC-11 are attached.
 
For customers who own the SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E, please update the firmware via SIGMA Optimization Pro? by connecting it to a computer using the supplied USB Cable. After completing the firmware update, please remove the battery from the camera, re-insert it and turn on the camera before attaching the MC-11.
 
Before updating the MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh from the following download page.
 
Applicable product
 
  • SIGMA MOUNT CONVERTER MC-11 EF-E
Benefits of the update
 
  • It has become compatible with the SIGMA 14-24mm F2.8 DG HSM | Art for Canon.
  • It has become compatible with SIGMA interchangeable lenses for Canon that are updated to firmware ver.2.00.
    * SIGMA 35mm F1.4 DG HSM | Art, SIGMA 50mm F1.4 DG HSM | Art, SIGMA 85mm F1.4 DG HSM | Art, SIGMA 135mm F1.8 DG HSM | Art, SIGMA 18-35mm F1.8 DC HSM | Art, SIGMA 24-70mm F2.8 DG OS HSM | Art, SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary
  • With the SGV lenses (Ver.2.00) listed below*, it has improved AF performance in the peripheral areas of the image as well as when the “Eye AF” function is selected.
  • With lenses that are not compatible with the MC-11, it has corrected the release time lag which occurred during flash photography.
    * Please note that this does not guarantee accurate operation with all the lenses that are not compatible with the MC-11.
Downlad: SIGMA Optimization Pro
 
B&H carries the Sigma Mount Converter MC-11.
Posted to: Canon News
Post Date: 3/7/2018 7:18:00 AM CT   Posted By: Sean
From Sigma:
 
Thank you for purchasing and using our products.
 
We would like to announce that a new firmware update for SIGMA interchangeable lenses for Canon is now available.
 
This firmware allows compatibility with Canon’s in-camera Lens Aberration Correction function to enable correction matching the optical characteristics of each lens. It also corrects the phenomenon that abnormal images appear or operation errors occur when the function is enabled.
 
For customers who own the SIGMA USB DOCK and applicable products listed below, please update the firmware via SIGMA Optimization Pro.
 
Before updating the firmware using the SIGMA USB DOCK, please ensure to update SIGMA Optimization Pro to Ver. 1.4.1 or later for Windows, and Ver. 1.4.0 or later for Macintosh.
 
Downlad: SIGMA Optimization Pro
 
Applicable products
 
  • SIGMA 35mm F1.4 DG HSM | Art Canon
  • SIGMA 50mm F1.4 DG HSM | Art Canon
  • SIGMA 85mm F1.4 DG HSM | Art Canon
  • SIGMA 135mm F1.8 DG HSM | Art Canon
  • SIGMA 18-35mm F1.8 DC HSM | Art Canon
  • SIGMA 24-70mm F2.8 DG OS HSM | Art Canon
  • SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary Canon
Benefits of the update
 
  • It ensures compatibility with Canon’s in-camera Lens Aberration Correction function, which enables correction matching the optical characteristics of the attached lens. ?
  • It corrects the phenomenon that abnormal images appear or operation errors occur when Canon’s in-camera Lens Aberration Correction function is enabled.
  • It corrects the phenomenon that exposure during shooting through the viewfinder or Live View mode becomes unstable.
  • It improves focus accuracy during Live View mode. (SIGMA 50mm F1.4 DG HSM | Art only)
* Compatible Canon camera models:EOS 1DX mark II, EOS 5Ds, EOS 5DsR, EOS 5D mark IV, EOS 6D Mark II, EOS 80D, EOS 8000D, (EOS Rebel T6s, EOS 760D, EOS 9000D), (EOS 77D, EOS Kiss X8i), (EOS Rebel T6i, EOS 750D, EOS Kiss X9i, (EOS Rebel T7i, EOS 800D, EOS Kiss X9), (EOS Rebel SL2, EOS 200D)
 
B&H carries Sigma Art and Contemporary lenses.
 Tuesday, February 27, 2018
From Sigma:
 
The SIGMA Corporation is pleased to announce the release of its lens firmware version 2.00 for its SIGMA GLOBAL VISION (SGV) interchangeable lenses compatible with Canon digital cameras featuring Lens Aberration Correction. The three types of corrective functions available are for peripheral illumination, chromatic aberrations, and distortion.
 
By updating their lens firmware to version 2.00, customers with compatible SGV interchangeable lenses for Canon cameras can perform aberration corrections that match the optical characteristics of their lenses. In addition, by turning Lens Aberration Correction on and before taking photographs, users can prevent certain image and operation errors from occurring.
 
Compatible lenses (Release planned for March 7th, 2018)
 
Contemporary line
 
  • SIGMA 100-400mm F5-6.3 DG OS HSM
Art line
 
  • SIGMA 18-35mm F1.8 DC HSM
  • SIGMA 24-70mm F2.8 DG OS HSM
  • SIGMA 35mm F1.4 DG HSM
  • SIGMA 50mm F1.4 DG HSM
  • SIGMA 85mm F1.4 DG HSM
  • SIGMA 135mm F1.8 DG HSM
Releases planned going forward
 
Contemporary line
 
  • SIGMA 17-70mm F2.8-4 DC MACRO OS HSM
  • SIGMA 18-200mm F3.5-6.3 DC MACRO OS HSM
  • SIGMA 18-300mm F3.5-6.3 DC MACRO OS HSM
  • SIGMA 150-600mm F5-6.3 DG OS HSM
Art line
 
  • SIGMA 50-100mm F1.8 DC HSM
  • SIGMA 30mm F1.4 DC HSM
  • SIGMA 12-24mm F4 DG HSM
  • SIGMA 24-35mm F2 DG HSM
  • SIGMA 24-105mm F4 DG OS HSM
  • SIGMA 14mm F1.8 DG HSM
  • SIGMA 20mm F1.4 DG HSM
  • SIGMA 24mm F1.4 DG HSM
Sports line
 
  • SIGMA 120-300mm F2.8 DG OS HSM
  • SIGMA 150-600mm F5-6.3 DG OS HSM
  • SIGMA 500mm F4 DG OS HSM
The following lenses will be compatible with Canon Lens Aberration Correction upon release.
 
  • SIGMA 14-24mm F2.8 DG HSM (release date: early March 2018)
  • SIGMA 70mm F2.8 DG MACRO (release date: TBD)
  • SIGMA 105mm F1.4 DG HSM (release date: TBD)
Compatible cameras
 
EOS 1D X Mark II,EOS 5Ds,EOS 5Ds R,EOS 5D Mark IV,EOS 6D Mark II,EOS 8000D(EOS Rebel T6s,EOS 760D), EOS 80D,EOS 9000D(EOS 77D),EOS Kiss x9i(EOS Rebel T7i, EOS 800D), EOS Kiss x9(EOS Rebel SL2, EOS 200D),EOS Kiss x8i(EOS Rebel T6i, EOS 750D )
 
About SIGMA lens firmware updates
 
By connecting a SIGMA Art, Contemporary, or Sports lens with the SIGMA USB DOCK (sold separately) to a computer on which SIGMA Optimization Pro Software is installed, photographers can update the lens firmware. For further information, please visit the SIGMA website.
 
For SIGMA lens owners who do not own the SIGMA USB DOCK, SIGMA performs lens firmware updates free of charge.
 
For further information, please contact your nearest authorized SIGMA subsidiary/distributor: http://www.sigma-global.com/en/about/world-network/
 
B&H carries the Sigma USB dock and Global Vision lenses.
Posted to: Canon News
Post Date: 2/27/2018 5:20:40 AM CT   Posted By: Sean
 Friday, February 23, 2018
From Sigma:
 
The Sigma Corporation is pleased to announce a firmware update for the SIGMA 30mm f/1.4 DC DN | Contemporary in Sony E-mount is now available.
 
Benefits of this firmware update
 
  • Improved AF performance when the “Eye AF” function is selected.
  • Improved AF performance in the peripheral areas in the image, when the “Lock on AF” function is selected.
  • Improved feeling of the MF operation of the lens.
To update the firmware, please refer to this link.
 
B&H carries the Sigma 30mm f/1.4 DC DN | Contemporary Lens.
Post Date: 2/23/2018 5:41:22 AM CT   Posted By: Sean
 Friday, September 8, 2017
It looks like Sigma has been diligently working to fix bugs and ensure their Global Vision lenses work properly with recently announced gear.
 
Sigma 24-70mm f/2.8 DG OS HSM | Art & Sigma 100-400mm f/5-6.3 DG OS HSM | Contemporary for Sigma / Canon / Nikon
 
Benefit of this firmware update
 
  • It has corrected the phenomenon that the Manual Override (MO) function will be disabled after adjusting the settings of focus mode switch on SIGMA Optimization Pro (Macintosh ver.).
Sigma Mount Converter MC-11 SA-E / EF-E
 
Benefit of this firmware update
 
  • It has corrected the phenomenon which may occur with the combination of SIGMA MOUNT CONVERTER MC-11 and some of SIGMA’s interchangeable zoom lenses on Sony a9 (ILCE-9) that when using AF-S mode and shooting in telephoto range, it could occasionally display the shot as in focus, although it may not be correctly locked on the subject.
  • It has become compatible with the SIGMA 24-70mm F2.8 DG OS HSM | Art for SIGMA (Firmware Ver.1.02), CANON (Firmware Ver.1.02), as well as the SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for SIGMA (Firmware Ver.1.02) and CANON (Firmware Ver1.03).
The above firmware updates are available for installation in Sigma Optimization Pro via the Sigma USB Dock.
 
In addition to firmware updates detailed above, Sigma announced today that they are now offering a rear filter holder installation service for the otherwise incompatibile-with-front-filters 14mm f/1.8 DG HSM Art lens.
 
Sigma 14mm f/1.8 DG HSM | Art
 
The Sigma Corporation is pleased to announce a chargeable service for installing the Rear Filter Holder FHR-11 on the SIGMA 14mm F1.8 DG HSM | Art for Canon.
 
From September onwards, the dedicated service staff for Sigma products will be able to install the Rear Filter Holder FHR-11 on SIGMA 14mm F1.8 DG HSM | Art for Canon.
 
The Rear Filter Holder FHR-11 is an accessory exclusively designed for the SIGMA 14mm F1.8 DG HSM | Art for Canon, and it enables photographers to use a filter sheet with the lens.By attaching it to the rear of the lens, it will allow more freedom of expression.
 
Sigma Rear Filter Holder for 14mm f 1.8 Art Lens

For details of cost and the commencement of the service, please contact your nearest authorized SIGMA subsidiary / distributor.
 
In case it is not convenient for your environment to use the installation service and you prefer to do it by your own effort, the necessary parts can be sold.Please contact your nearest authorized SIGMA subsidiary / distributor for further information. Customers who do not own the appropriate tools or who do not feel confident in attaching the filter holder themselves may take advantage of the chargeable installation service.
 
B&H carries the following:
 
 Friday, August 18, 2017
From Sigma:
 
Thank you for purchasing and using our products.
 
We would like to announce that a firmware update for the SIGMA 24-70mm F2.8 DG OS HSM | Art for SIGMA and CANON, as well as a firmware update for the SIGMA MOUNT CONVERTER MC-11 SA-E and EF-E is now available.
 
This firmware update corrects the phenomenon that the OS mechanism does not operate properly when attached to the SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E.
 
For customers who own the SIGMA USB DOCK, please update the firmware via SIGMA Optimization Pro. For those who own the SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E, please update the firmware via SIGMA Optimization Pro by connecting it to a computer using the supplied USB Cable.
 
Before updating the MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh from the following download page.
 
Applicable Product
 
  • SIGMA 24-70mm F2.8 DG OS HSM | Art for SIGMA / CANON
Benefit of this firmware update
 
  • It has corrected the phenomenon that the OS mechanism does not operate properly when attached to the SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E.
Applicable Product
 
  • SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E
Benefit of this firmware update
 
  • It has become compatible with the SIGMA 24-70mm F2.8 DG OS HSM | Art for SIGMA / CANON (ver. 1.01).
SIGMA Optimization Pro Download page
Post Date: 8/18/2017 5:19:04 AM CT   Posted By: Sean
 Friday, August 4, 2017
From Sigma:
 
Thank you for purchasing and using our products.
 
We would like to announce that a firmware update for the SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for CANON and SIGMA MOUNT CONVERTER MC-11 EF-E is now available.
 
This firmware update corrects the phenomenon that the OS mechanism does not operate properly when attached to the SIGMA MOUNT CONVERTER MC-11 EF-E.
 
For customers who own the SIGMA USB DOCK, please update the firmware via SIGMA Optimization Pro. For those who own the SIGMA MOUNT CONVERTER MC-11 EF-E, please update the firmware via SIGMA Optimization Pro* by connecting it to a computer using a supplied USB Cable.
 
* Before updating the MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh from the following download page.
 
Applicable product
 
  • SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for CANON
Benefit of this firmware update
 
  • It has corrected the phenomenon that the OS mechanism does not operate properly when attached to the SIGMA MOUNT CONVERTER MC-11 EF-E.
Applicable product
 
  • SIGMA MOUNT CONVERTER MC-11 EF-E
Benefit of this firmware update
 
  • It has become compatible with the SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for CANON (ver. 1.02).
Posted to: Canon News
Post Date: 8/4/2017 7:27:10 AM CT   Posted By: Sean
 Thursday, July 20, 2017
From Sigma:
 
Thank you for purchasing and using our products. We would like to announce a firmware update for the SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E.
 
This firmware update corrects the phenomenon that AF does not operate properly when some lenses that are not compatible with the MC-11 are attached. This firmware update does not guarantee accurate operation with lenses that are not compatible with the MC-11.
 
For customers who own the SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E, please update the firmware via SIGMA Optimization Pro by connecting it to a computer using the supplied USB Cable.
 
* Before updating the MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh from the following download page.
 
SIGMA Optimization Pro Download Page
 
Applicable product
 
  • SIGMA MOUNT CONVERTER MC-11 SA-E / EF-E
Benefit of this firmware update
 
  • It corrects the phenomenon that AF does not operate properly when some lenses that are not compatible with the MC-11 are attached.
Lenses that are not compatible with the MC-11
 
We will continue to consider ensuring stable operation of lenses that are not compatible with the MC-11. Therefore customers who are using the MC-11 can enjoy photography as much as possible with their own lenses even though there may be some restrictions. However, please note that due to the characteristics of the products, accurate operation, including AF, is not guaranteed with lenses that are not compatible with the MC-11.
Post Date: 7/20/2017 6:07:07 AM CT   Posted By: Sean
 Wednesday, July 5, 2017
From Sigma:
 
Thank you for purchasing and using our products. We would like to announce a firmware update for the SIGMA MOUNT CONVERTER MC-11 EF-E.
 
This firmware update allows compatibility with the SIGMA 14mm F1.8 DG HSM | Art, SIGMA 24-70mm F2.8 DG OS HSM | Art, Cine Lens 14mm T2 FF EF mount and 135mm T2 FF EF mount from FF High Speed Prime Line.
 
For customers who own the SIGMA MOUNT CONVERTER MC-11 EF-E, please update the firmware via SIGMA Optimization Pro by connecting it to a computer using the supplied USB Cable.
 
* Before updating the MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh from the following download page.
 
SIGMA Optimization Pro Download page
 
Benefits of this firmware update
 
  • It has become compatible with the SIGMA 14mm F1.8 DG HSM | Art and SIGMA 24-70mm F2.8 DG OS HSM | Art.
  • It has become compatible with the FF High Speed Prime Line SIGMA 14mm T2 FF (EF) and the SIGMA 135mm T2 FF (EF).
B&H carries the Sigma MC-11 EF-E Mount Converter.
Posted to: Canon News
Post Date: 7/5/2017 7:02:48 AM CT   Posted By: Sean
 Friday, June 23, 2017
From SIGMA:
 
Thank you for purchasing and using our products.
 
Sigma Corporation would like to announce a firmware update for the SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for Nikon is now available. By updating the firmware, the lens will offer improved AF performance.
 
For customers who own the SIGMA USB DOCK, please update the firmware via SIGMA Optimization Pro.
 
Applicable product
 
  • SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for Nikon
Benefits of this firmware update
 
  • It has improved the AF performance.
SIGMA Optimization Pro Download page
Posted to: Nikon News
Post Date: 6/23/2017 9:11:04 AM CT   Posted By: Sean
 Tuesday, June 6, 2017
From Sigma:
 
Thank you for purchasing and using our products.
 
Sigma Corporation would like to announce a firmware update for the SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for Canon and SIGMA MOUNT CONVERTER MC-11 EF-E is now available.
 
By updating the firmware, the lens will offer improved AF performance. Also, the latest firmware of the SIGMA MOUNT CONVERTER MC-11 EF-E will not only offer improved AF performance, but also enables the OS mechanism to start operating faster than before.
 
For customers who own the SIGMA USB DOCK, please update the firmware via SIGMA Optimization Pro. For those who own the SIGMA MOUNT CONVERTER MC-11 EF-E, please update the firmware via SIGMA Optimization Pro by connecting it to a computer using a supplied USB Cable.
 
* Before updating the MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh from the following download page.
 
Applicable Products
 
SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for Canon
 
Benefits of This Firmware Update
 
  • Improved the AF performance.
  • When attached to the SIGMA MOUNT CONVERTER MC-11 EF-E (ver. 1.06), the firmware update offers not only the improved AF performance, but also enables the OS mechanism to start operating faster than before.
Applicable Products
 
SIGMA MOUNT CONVERTER MC-11 EF-E
 
Benefits of This Firmware Update
 
  • Compatibility with the SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary for Canon (ver. 1.01).
SIGMA Optimization Pro Download Page
Posted to: Canon News
Post Date: 6/6/2017 6:10:59 AM CT   Posted By: Sean
 Wednesday, May 17, 2017
From Sigma:
 
Thank you for purchasing and using our products.
 
We would like to announce the availability of a new firmware update for the following Canon mount lenses. The lens firmware updates improve the AF accuracy when it is mounted on the SIGMA MOUNT CONVERTER MC-11 EF-E, and offers the improved usability for video shooting.For customers who own the following applicable products and the SIGMA USB DOCK, please update the lens firmware using SIGMA Optimization Pro.
 
Applicable products
 
  • SIGMA 24-105mm F4 DG OS HSM | Art CANON
  • SIGMA 17-70mm F2.8-4 DC MACRO OS HSM | Contemporary CANON
  • SIGMA 18-200mm F3.5-6.3 DC MACRO OS HSM | Contemporary CANON
  • SIGMA 18-300mm F3.5-6.3 DC MACRO OS HSM | Contemporary CANON
Benefits of this firmware update
 
  • It has improved the AF accuracy when the lens is attached with the SIGMA MOUNT CONVERTER MC-11.
    * It is necessary to use the SIGMA USB DOCK for Canon ver.1.02 or later to update the firmware.
    *For customers who own SIGMA MOUNT CONVERTER MC-11 EF-E, it is necessary to update this to the latest firmware ver. 1.05.
  • It has reduced the operating sound of the lens diaphragm blades when attached with the SIGMA MOUNT CONVERTER MC-11 EF-E and used for video shooting.
  • It has improved the AF accuracy when the lens is used for video shooting as well as with Live View mode of EOS DIGITAL SLR cameras.*1
  • It has reduced the operating sound of the lens diaphragm blades when the lens is used for video shooting on EOS DIGITAL SLR cameras. *1
  • It has become compatible with the Canon Digital Cinema Camera EOS C300 Mark II.
*1 The degree of improvement may differ depending on the camera used.
 
Before updating the lens firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh from the following download page.
 
SIGMA Optimization Pro Download page
Posted to: Canon News
Post Date: 5/17/2017 6:55:28 AM CT   Posted By: Sean
 Tuesday, April 18, 2017
From Sigma:
 
Sigma 500mm f/4 DG OS HSM Sports Firmware v.1.01:
 
  • It has corrected the phenomenon that 3D-tracking does not work when it is attached with TELE CONVERTER TC-1401 on a Nikon DSLR.
* For this update, it requires the firmware of the SIGMA USB DOCK for NIKON to be Ver.1.01 or later.
* Before updating the firmware of the 500mm F4 DG OS HSM | Sports for NIKON, Please ensure SIGMA Optimization Pro has been updated to Ver1.4.1 or later for Windows, or Ver1.4.0 or later for Macintosh.

 


Sigma USB Dock Firmware v.1.03
 
  • Compatible with SIGMA 100-400mm F5-6.3 DG OS HSM C017.


SIGMA Optimization Pro Download
 
B&H carries the Sigma 500mm f/4 DG OS HSM Sports Lens and USB Dock and has the Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens available for preorder.
 Tuesday, March 21, 2017
From Sigma:
 
Thank you for purchasing and using our products. We would like to announce the firmware update for the SIGMA MOUNT CONVERTER MC-11 EF-E. This firmware update allows it to be compatible with the SIGMA 135mm F1.8 DG HSM | Art (Release: April), SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary (TBD), Cine Lens 50mm T1.5 FF EF mount from FF High Speed Prime Line (TBD) and so on.
 
For customers who own the SIGMA MOUNT CONVERTER MC-11 EF-E, please update the firmware via SIGMA Optimization Pro by connecting it to a computer using a supplied USB Cable.
 
Before updating the MC-11 firmware, please ensure SIGMA Optimization Pro has been updated to ver. 1.4.1 or later for Windows, and ver. 1.4.0 or later for Macintosh from the following download page.
 
SIGMA Optimization Pro Download page
 
For SIGMA MOUNT CONVERTER MC-11 SA-E, firmware update announced on March 10th, 2017 allows it to be compatible with SIGMA 135mm F1.8 DG HSM | Art and SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary.
 
Applicable product
 
  • SIGMA MOUNT CONVERTER MC-11 EF-E
Benefits of this firmware update
 
  • It has become compatible with the SIGMA 135mm F1.8 DG HSM | Art and SIGMA 100-400mm F5-6.3 DG OS HSM | Contemporary.
  • It has become compatible with the Cine Lenses; SIGMA 20 mm T1.5 FF EF mount, 24 mm T1.5 FF EF mount, 35mm T1.5 FF EF mount, 50 mm T1.5 FF EF mount, 85 mm T1.5 FF EF mount from FF High Speed Prime Line, and 24-35mm T2.2 FF EF mount from FF Zoom Line.
For further information, please contact your nearest authorized SIGMA subsidiary / distributor.
 
B&H carries the Sigma Mount Converter MC-11.
Posted to: Canon News
Post Date: 3/21/2017 6:49:53 AM CT   Posted By: Sean
 Friday, August 5, 2016
Sigma has firmware updates available for the following lenses:
 
  • Sigma 35mm f/1.4 DG HSM Art
  • Sigma 17-70mm f/2.8-4 DC Macro OS HSM Contemporary
  • Sigma 18-300mm f/3.5-6.3 DC Macro OS HSM Contemporary
  • SIGMA 120-300mm f/2.8 DG OS HSM Sports
All three firmware updates resolve an underexposure issue when the lens is used with a Nikon D500. The 120-300mm f/2.8 DG OS HSM Sports firmware update is only required if using a TC-1401 or TC-2001 teleconverter with the lens.
 
Sigma Global Vision lenses (like the ones above) can be updated using Sigma USB Dock. Before updating, be sure to download and install the latest version of Sigma Optimization Pro.
 
If you do not own a USB Dock, you can send your lens to a Sigma Service Center and have its firmware updated free of charge. However, considering the cost of shipping a lens insured and the universal nature of the dock, simply buying the USB Dock seems to be the most practical way to update your lens' firmware.
Post Date: 8/5/2016 7:37:29 AM CT   Posted By: Sean
 Thursday, June 30, 2016
From Sigma:
 
Thank you for purchasing and using our products.
 
We would like to announce the availability of a new firmware update for the SIGMA 150-600mm F5-6.3 DG OS HSM | Sports in Nikon mount and the SIGMA 150-600mm F5-6.3 DG OS HSM | Contemporary in Nikon mount. This firmware update can be installed using SIGMA Optimization Pro.
 
The lens firmware update corrects the phenomenon of overexposure when the lens is attached to the SIGMA TELE CONVERTER TC-1401 on Nikon Digital SLR camera “D500”, released by NIKON CORPORATION.
 
For customers who own the following applicable products and also SIGMA USB DOCK, please update the lens firmwareusing SIGMA Optimization Pro.
 
For customers who do not own SIGMA USB DOCK, the lens firmware update will be provided free of charge. Please contact your nearest authorized subsidiary/distributor of SIGMA.
 
Applicable products
 
  • SIGMA 150-600mm F5-6.3 DG OS HSM | Sports – Nikon mount
  • SIGMA 150-600mm F5-6.3 DG OS HSM | Contemporary - Nikon mount
Benefit of this firmware update
 
  • It has corrected the phenomenon that it shows some overexposure when it is attached with SIGMA TELE CONVERTER TC-1401 on Nikon D500.
* For customers who are using SIGMA Optimization Pro Ver1.1 or earlier, please ensure to update it to Ver1.3 from the Optimization Pro download page before updating the lens firmware.
 
B&H carries the Sigma 150-600mm f/5-6.3 DG OS HSM Sports, 150-600mm f/5-6.3 DG OS HSM Contemporary & USB Dock.
Posted to: Nikon News
Post Date: 6/30/2016 6:27:13 AM CT   Posted By: Sean
 Friday, June 24, 2016
From Sigma:
 
Thank you for purchasing and using our products.
 
We would like to announce the update in the lens firmware of the SIGMA 20mm F1.4 DG HSM | Art Canon and SIGMA 24-35mm F2 DG HSM | Art Canon on the SIGMA Optimization Pro.
 
The latest firmware update makes it fully functional with the Canon Digital Cinema Camera EOS C300 Mark II.
 
For those customers who own the following products, please update the firmware of the lens via the SIGMA Optimization Pro.
 
[Applicable products]
SIGMA 20mm F1.4 DG HSM | Art– Canon mount
SIGMA 24-35mm F2 DG HSM | Art– Canon mount
 
[Benefit of this firmware update]
 
  • It becomes fully functional with the Canon Digital Cinema Camera EOS C300 Mark II.
  • For SIGMA 20mm F1.4 DG HSM | Art Canon, this lens firmware update also corrects the phenomenon that the images show some underexposure when "Evaluative Metering" or "Center-weighted Average Metering" is selected on Canon EOS-1D X Mark II.
Please be sure to update SIGMA Optimization Pro to the latest version before upgrading the lens's firmware.
 
You can download the latest version of the software from the following page:
http://www.sigma-global.com/download/
 
We appreciate your consistent support for our company and products.
 
B&H carries the Sigma USB Dock.
Posted to: Canon News
Post Date: 6/24/2016 5:36:51 AM CT   Posted By: Sean
From Sigma:
 
Thank you for purchasing and using our products.
 
We would like to announce the availability of new firmware and support for the applicable lenses regarding the phenomenon that exposure of the image may not be accurate, which was announced on May 27th, 2016. This happens when some SIGMA interchangeable lenses for CANON are used on Canon EOS-1DX Mark II.
 
If you own the following applicable products, please refer to the information below and update the lens firmware accordingly.
 
[Benefit of this firmware update]
The lens firmware update corrects the phenomenon of some underexposure when the lenses listed below are used and either “Evaluative Metering” or “Center-weighted Average Metering” is selected in Metering Mode of the camera.
 
[Applicable products]
SIGMA 20mm F1.4 DG HSM | Art – Canon mount
SIGMA 35mm F1.4 DG HSM | Art – Canon mount
SIGMA 85mm F1.4 EX DG HSM – Canon mount
 
For customers who own the applicable products listed above, the lens firmware update will be provided free of charge. Please contact your nearest authorized subsidiary/distributors of SIGMA.
 
For customers who own the SIGMA USB DOCK, and either the SIGMA 20mm F1.4 DG HSM | Art Canon or the SIGMA 35mm F1.4 DG HSM | Art Canon, please update the lens firmware using SIGMA Optimization Pro.
 
We appreciate your continued support for our company and products.
 
B&H carries the Sigma USB Dock.
Post Date: 6/24/2016 5:28:03 AM CT   Posted By: Sean
 Friday, February 19, 2016
From Sigma:
 
Thank you for your patronage to SIGMA products.
 
We would like to announce that we are planning to release a firmware update for the SIGMA 150-600mm F5-6.3 DG OS HSM | Sports in Canon and Nikon mount, as well as the SIGMA 150-600mm F5-6.3 DG OS HSM | Contemporary in Canon and Nikon mount on Friday, March 11th, 2016.
 
The latest firmware update improves the AF algorithm of 150-600mm F5-6.3 DG OS HSM lenses and further enhances AF speed by optimizing HSM (Hyper Sonic Motor) drive control.
 
It is expected to increase autofocus speed by approximately 20%, to a maximum of 50%, during normal shooting as well as when using “Speed Priority” set through SIGMA Optimization Pro.
 
The firmware update requires the installation of the latest version of SIGMA Optimization Pro on your personal computer and the SIGMA USB DOCK accessory (sold separately).
 
Further details on this firmware update will be announced at a later date.
 
We appreciate your continued support for our company and products.
 
B&H carries the Sigma 150-600mm lenses and the USB Dock.
Post Date: 2/19/2016 6:29:41 AM CT   Posted By: Sean
 Friday, January 23, 2015
From Sigma:
 
Thank you for purchasing and using our products.
 
The Sigma Corporation is pleased to announce that the lens firmware update for the 150-600mm F5-6.3 DG OS HSM | Sports SIGMA, CANON and NIKON is available through SIGMA Optimization Pro, the dedicated software for the SIGMA USB DOCK.
 
The latest firmware enables the lens to offer improved Optical Stabilization in OS mode 2, which is optimized for panning photography. By taking advantage of the new OS algorithm in OS mode 2, it provides effective compensation, not only in horizontal direction, but also vertical and diagonal directions.
 
For those customers who own the following product, please update the firmware of the lens via SIGMA Optimization Pro.
 
[Product]
 
  • Sigma 150-600mm F5-6.3 DG OS HSM | Sports for SIGMA, CANON and NIKON
Should the version of SIGMA Optimization Pro not be updated to Ver. 1.2 yet, please be sure to update it before operating any lens firmware update.
 
You can download the latest version of the software from the following page;
http://www.sigma-global.com/download/en/
 
B&H carries the Sigma 150-600mm F5-6.3 DG OS HSM Sports lens.
Post Date: 1/23/2015 7:34:14 AM CT   Posted By: Sean
 Thursday, October 23, 2014
From Sigma:
 
Canon Mount Firmware 1.03 – It has optimized the lens firmware for SIGMA TELE CONVERTER TC-1401 and TC-2001.
 
Note: Before upgrading the firmware of 120-300mm F2.8 DG OS HSM S013, please first update your SIGMA Optimization Pro to Ver1.2.0.
 
Download via Optimization Pro Software and install via Sigma's USB Dock.
 
B&H carries the Sigma 120-300mm F2.8 DG OS HSM Sports Lens.
Posted to: Canon News
Post Date: 10/23/2014 8:08:51 AM CT   Posted By: Sean
 Thursday, June 26, 2014
From Sigma:
 
Thank you for purchasing and using our products.
 
We are pleased to inform you the SIGMA 120-300mm f/2.8 DG OS HSM F/CANON Firmware Update is now available.
 
This firmware update allows you to use the SIGMA USB DOCK with the SIGMA 120-300mm f/2.8 DG OS HSM F/CANON. If you have the products mentioned below, please start up SIGMA Optimization Pro and then operate lens firmware update.
 
Applicable products: SIGMA 120-300mm f/2.8 DG OS HSM S013 F/CANON
 
Benefits of this firmware update:

  • It has improved the Auto Focus speed of "Standard" and "Speed-priority" modes.
  • It has improved the focus accuracy when it is mounted on Canon EOS-1D Mark III or Canon EOS-1D Mark IV.

Please update to SIGMA Optimization Pro Ver1.2 before operating firmware update of SIGMA 120-300mm f/2.8 DG OS HSM S013 F/CANON.
 
SIGMA Optimization Pro Download Page
 
Note: Apparently, blogger/photographer JerseyShooter had a big hand in alerting Sigma to the need for this firmware update. Check out his blog for more info.
 
B&H carries the Sigma 120-300mm f/2.8 DG OS HSM lens and the Sigma USB Dock.

Posted to: Canon News
Post Date: 6/26/2014 7:52:07 AM CT   Posted By: Sean
   
Archives
2019   Jan   Feb   Mar   Apr   May   Jun   Jul
2018   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2017   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2016   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2015   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2014   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2013   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2012   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2011   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2010   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2009   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2008   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2007   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2006   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2005   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
Help  |  © 2019 The Digital Picture, LLC  |  Bryan CarnathanPowered By Christ!