Nikon Software Updates RSS Feed for Nikon Software Updates

 Thursday, May 16, 2019
From Nikon:
 
Capture NX-D v.1.5.3
 
Changes from Version 1.5.2 to 1.5.3
 
  • Added support for the COOLPIX W150.
  • Added support for Z 7 firmware version 2.00 and Z 6 firmware version 2.00.
Download: Capture NX-D v.1.5.3
 


ViewNX-i v.1.3.3
 
Changes from Version 1.3.2 to Version 1.3.3
 
  • Added support for the COOLPIX W150.
  • Added support for Z 7 firmware version 2.00 and Z 6 firmware version 2.00.
  • Adjusted the width of the lines for the focus point frames.
Download: Nikon ViewNX-i v.1.3.3
 


Camera Control Pro 2 v.2.28.2
 
Changes from Version 2.28.0 to 2.28.2
 
  • Added support for Z 7 firmware version 2.00 and Z 6 firmware version 2.00.
  • Fixed an issue that resulted in the camera and the LCD display area in Camera Control Pro 2 showing different statuses for exposure lock if AE Lock only was deselected in Camera Control Pro 2 while exposure lock engaged on the Z 7 or Z 6 under certain conditions.
  • Fixed an issue that resulted in Camera Control Pro 2 and the camera showing different options for white balance if the user switched from Programmed Auto to another exposure mode while Enable Controls on Camera Body was disabled.
Download: Camera Control Pro 2 v.2.28.2
 Tuesday, March 19, 2019
From Nikon:
 
Capture NX-D 1.5.2
 
Changes from Version 1.5.1 to 1.5.2
 
Fixed the following issues:
 
  1. The application would crash under some conditions.
  2. If the Specify size option was selected in the batch processing dialog, some time would elapse before the Start button would be available.
  3. Changes to image length in the Convert Files dialog would sometimes not be matched by changes to width.
  4. All changes to NEF/NRW (RAW) pictures made with NEF/NRW + JPEG enabled would be lost when the files were saved in JPEG format.
  5. Batch processing and file conversion could not be resumed once paused.
  6. The application would sometimes fail to launch.
  7. Image artifacts (“noise”) would increase in pictures saved in other formats.
  8. Straighten now functions as intended.
  9. Files saved at an image quality of “99” would be larger than those saved at an image quality of “100”.
  10. Portions of NEF (RAW) images shot with the Z 6 would sometimes not display correctly after the pictures were saved using NEF processing.
Download: Capture NX-D 1.5.2
 


ViewNX-i 1.3.2
 
Changes from Version 1.3.1 to Version 1.3.2:
 
  1. Fixed an issue that resulted in files saved at an image quality of “99” being larger than those saved at an image quality of “100”.
  2. Fixed an issue that resulted in changes to XMP/IPTC information being lost from files saved using Ctrl+S.
Download: ViewNX-i 1.3.2
 


Picture Control Utility 2.4.2
 
Changes from Version 2.4.1 to 2.4.2:
 
  1. Portions of NEF (RAW) images shot with the Z 6 would sometimes not display correctly after the pictures were saved using NEF processing.
Download: Picture Control Utility 2.4.2
 
Posted to: Nikon News
Post Date: 3/19/2019 6:03:32 AM CT   Posted By: Sean
 Tuesday, December 4, 2018
From Nikon:
 
Changes from Version 1.0.0 to 1.1.0
 
  • The application no longer uses Microsoft Silverlight and consequently a network connection is no longer required.
  • Added support for Russian and Turkish and ended support for Swedish.
  • IPTC categories are now listed both in the selected language and in English.
  • Added support for Windows 8.1 and Windows 10.
  • Ended support for Windows Vista and Windows XP.
Download: Nikon IPTC Preset Manager v.1.1.0
Posted to: Nikon News
Post Date: 12/4/2018 8:29:41 AM CT   Posted By: Sean
 Wednesday, November 21, 2018
Nikon has added Z 6 compatibility to the newest versions of Camera Control Pro 2 and Wireless Transmitter Utility. Download links below.
 
Download Nikon Software Updates
 
Posted to: Nikon News
Post Date: 11/21/2018 9:15:30 AM CT   Posted By: Sean
 Thursday, November 15, 2018
From Nikon:
 
Changes to ViewNX-i, Picture Control Utility 2 & Capture NX-D
 
  • Added support for the Z 6.
Additional changes from Capture NX-D version 1.5.0 to 1.5.1
 
Fixed the following issues:
 
  • NEF (RAW) photos taken with the Z 7 using HDR (high dynamic range) would sometimes not display.
  • NEF (RAW) photos taken using Silent photography with the Z 7 in burst mode could sometimes not be opened.
  • Color control points could not be placed on some rotated images.
Download:
 
ViewNX-i v.1.3.1
Picture Control Utility 2 v.2.4.1
Capture NX-D 1.5.1
Posted to: Nikon News
Post Date: 11/15/2018 1:10:36 PM CT   Posted By: Sean
 Wednesday, September 26, 2018
From Nikon:
 
Nikon Wireless Transmitter Utility
 
Changes from Versions 1.7.0 to 1.8.0
 
  • Added support for the Z 7.
  • The Z 7 can now be paired with computers and upload pictures via built-in Wi-Fi.
Download: Nikon Wireless Transmitter Utility 1.8.0
 


Nikon Camera Control Pro 2 2.27.0
 
Changes from Version 2.26.0 to 2.27.0
 
  • Added support for the Z 7.
  • The principal features added with support for the Z 7 are as follows:
    • Target-tracking AF
    • AE lock only, Vibration reduction, and Diffraction compensation
    • Support for Vignette control, Auto distortion control, and AF-area mode and Focus mode selection during movie recording
    • A Record timecodes option
    • Support for Output data depth and N-Log setting options when the camera is connected to external video recorders
Download: Nikon Camera Control Pro 2 2.27.0
Posted to: Nikon News
Post Date: 9/26/2018 12:13:31 PM CT   Posted By: Sean
 Friday, September 14, 2018
From Nikon:
 
  • Added support for the Z 7, D3500, and COOLPIX P1000.
  • Added a Diffraction Compensation feature and updated Latest Picture Control for the Z 7.
  • Added a Color Control Point feature that can be used to selectively edit brightness and hue.
  • Image processing is now faster and consumes less memory for improved stability.
  • Picture Controls created or modified in Picture Control Utility 2 can now be applied without restarting Capture NX-D.
  • Fixed an issue that resulted in anchor points created by selecting Add Anchor Point in the Levels & Curves palette and then clicking a point in the image not appearing in the channel tone curves.
Download: Nikon Capture NX-D v.1.5.0
Posted to: Nikon News
Post Date: 9/14/2018 6:51:14 AM CT   Posted By: Sean
 Tuesday, September 4, 2018
From Nikon:
 
ViewNX-i 1.3.0
 
Changes from Version 1.2.11 to Version 1.3.0
 
  • Added support for the Z 7, D3500, and COOLPIX P1000.
  • Added a Diffraction Compensation feature and updated Latest Picture Control for the Z 7.
  • Convert Files now shows the projected post-conversion file size.
  • Added support for movies over 4 GB in size.
  • Filter and sort operations can now be performed on pictures protected using ViewNX-i.
  • Web Service no longer supports Facebook.
  • Options > Movies > Play > Favor frame rate is now enabled by default.
Download: Nikon ViewNX-i 1.3.0
 


NRW Codec 1.8.0
 
What’s New with Version 1.8.0
 
  • Windows Photo Gallery, Windows Live Photo Gallery, and Windows Photo Viewer now display the previews embedded in NRW (RAW) images.
  • For information on supported cameras, see “System Requirements”, below.
Download: Nikon NRW Codec 1.8.0
 


Picture Control Utility 2.4.0
 
Changes from Version 2.3.1 to 2.4.0
 
  • Added support for the Z 7.
  • Added support for “NP3” custom Picture Controls.
  • Made the following changes:
    • Changed the name of the Nikon 1 category in Product > Add Product to Mirrorless Cameras.
    • Except when the software is launched from Camera Control Pro 2, the Adjust Preview settings last in effect in Picture Control Utility 2 are now recalled when next you launch the software.
    • The Active D Lighting settings in effect when pictures were taken are now preserved in pictures imported using Change Preview Image.
    • Selecting Window > Reset Layout no longer resets the preview image.
    • The Share display last in effect is now recalled when next you launch the software.
    • The Date/Time Created sort option has been removed from List: Picture Controls.
    • Changes to Histogram are now visible only when Reflect Changes is enabled.
Download: Nikon Picture Control Utility 2.4.0
Posted to: Nikon News
Post Date: 9/4/2018 8:30:50 AM CT   Posted By: Sean
 Thursday, March 15, 2018
From Nikon:
 
KeyMission 360 Firmware v.1.5
 
Changes from Firmware Version 1.4 to 1.5:
 
  • Uncompressed equirectangular video of the view through the lens can now be output via the HDMI connector together with audio from the camera microphone. See the online manual for more information.
  • Fixed an issue that caused visible variation in contrast in images recorded using Active D-Lighting.
Download: Nikon KeyMission 360 Firmware v.1.5
 


ViewNX-i (for Mac) v.1.2.12
 
Changes from Version 1.2.11 to Version 1.2.12
 
  • Fixed the following issues with NEF (RAW) images shot with On selected for Auto distortion control:
    • Attempting to edit the images or add ratings or other information would result in ViewNX-i quitting unexpectedly when the images were saved.
    • Selecting Add additional information to files in the preferences dialog when attempting to transfer the images using Nikon Transfer 2 would result in Nikon Transfer 2 quitting unexpectedly.
Download: ViewNX-i (for Mac) v.1.2.12
Posted to: Nikon News
Post Date: 3/15/2018 8:50:12 AM CT   Posted By: Sean
 Tuesday, March 6, 2018
From Nikon:
 
Changes from Version 1.4.6 to 1.4.7
 
  • Fixed an issue that resulted in the Metadata for photos taken using type E lenses listing the lens as type G.
Download: Nikon Capture NX-D 1.4.7
Posted to: Nikon News
Post Date: 3/6/2018 5:25:52 AM CT   Posted By: Sean
 Thursday, March 1, 2018
From Nikon:
 
Nikon D500 Firmware v.1.14
 
Changes from “C” Firmware Version 1.13 to 1.14
 
  • Fixed an issue that prevented images being copied using the Copy image(s) item in the PLAYBACK MENU if an exhausted battery or no battery was inserted in the camera, even when a battery with sufficient charge was inserted in the MB-D17 battery pack.
Download: Nikon D500 Firmware v.1.14
 


Nikon Distortion Control Data v.2.017
 
Note from T-D-P: Nikon doesn't actually specify what's new in this version of its Distortion Control Data, but it's likely that this new verion includes compatibility for new cameras and/or lenses. For instance, the 180-400mm F/4E TC1.4 FL ED VR (announced last month) is listed as a supported lens in this release.
 
Download: Nikon Distortion Control Data v.2.017
Posted to: Nikon News
Post Date: 3/1/2018 5:27:46 AM CT   Posted By: Sean
 Wednesday, February 21, 2018
From Nikon:
 
Changes from Version 1.0.3 to 1.1.0
 
  • Images can now be zoomed in and out in smaller increments.
  • The standard aspect ratio for spherical 360° content is now 16:9. When images with an aspect ratio of 16:9 are viewed at 4:3, the right and left edges will not be displayed.
  • Loop playback is now available with movies.
  • The movie editing progress bar is now easier to use.
Download: Nikon KeyMission 360/170 Utility v.1.1.0
 
B&H carries Nikon KeyMission Action Cameras.
Post Date: 2/21/2018 7:19:23 AM CT   Posted By: Sean
 Thursday, February 8, 2018
From Nikon:
 
Changes from Version 1.2.10 to Version 1.2.11
 
Fixed the following issues:
 
  • The XMP/IPTC Information > Keywords history could not be deleted.
  • Auto Play sometimes failed to function as expected when Filters were enabled.
Download: Nikon ViewNX-i 1.2.11
Post Date: 2/8/2018 5:22:14 AM CT   Posted By: Sean
 Friday, October 6, 2017
From Nikon:
 
Changes from Version 1.2.8 to Version 1.2.9
 
  • Added support for the D850.
  • Added support for the D850’s new White balance > Natural light auto option.
Download: Nikon ViewNX-i v.1.2.9
Posted to: Nikon News
Post Date: 10/6/2017 5:10:11 AM CT   Posted By: Sean
 Wednesday, October 4, 2017
From Nikon:
 
Changes from Version 1.2.9 to Version 1.2.10
 
  • Fixed an issue with the Map workspace that resulted in maps not displaying correctly.
Download: Nikon ViewNX-i 1.2.10
Post Date: 10/4/2017 5:46:23 AM CT   Posted By: Sean
 Wednesday, September 13, 2017
From Nikon:
 
Changes from Version 2.3.0 to 2.3.1
 
  • Added support for the D850.
  • Added support for the D850’s new White balance > Natural light auto option.
Download: Picture Control Utility 2.3.1
Posted to: Nikon News
Post Date: 9/13/2017 7:21:36 AM CT   Posted By: Sean
 Friday, September 8, 2017
From Nikon:
 
Nikon Camera Control Pro 2 v.2.26.0
 
Changes from Version 2.25.1 to 2.26.0
 
  • Added support for the D850.
  • The principal features added with the D850 are as follows:
    • With the exception of some features, the controls on the D850 can now be used during live view.
    • When recording movies to HDMI devices, users can now start and end recording via the Control HDMI External Recording option in the Camera menu.
    • Custom Setting g2 (Highlight brightness) in the D850 Custom Settings menu can also now be accessed via the Custom Settings option in the Camera menu.
  • The direction of the shading in the live view highlight display can now be changed using the Highlight display option.
  • Added a Live View item to Options.
Download: Nikon Camera Control Pro 2 v.2.26.0
Posted to: Nikon News
Post Date: 9/8/2017 10:55:40 AM CT   Posted By: Sean
 Wednesday, September 6, 2017
Nikon has issued several software updates for compatibility with the D850. See below for more details.
 


Capture NX-D v.1.4.6
 
Changes from Version 1.4.5 to 1.4.6
 
  • Added support for the D850.
  • Added support for the D850’s new White balance > Natural light auto option.
  • Added the following features to support D5 “C” firmware version 1.20:
    • Added support for group-area AF (HL) and group-area AF (VL).
    • The color temperature for pictures shot using auto white balance can now be viewed in the metadata tab.
Download: Capture NX-D v.1.4.6
 


ViewNX-i v.1.2.9
 
Changes from Version 1.2.8 to Version 1.2.9
 
  • Added support for the D850.
  • Added support for the D850’s new White balance > Natural light auto option.
Download: ViewNX-i v.1.2.9
 


Picture Control Utility 2 v.2.3.1
 
Changes from Version 2.3.0 to 2.3.1
 
  • Added support for the D850.
  • Added support for the D850’s new White balance > Natural light auto option.
Download: Picture Control Utility 2 v.2.3.1
 


WT-7 Firmware v.1.2
 
Changes from Firmware Version 1.1 to 1.2
 
  • Added support for the D850.
Download: WT-7 Firmware v.1.2
 


Wireless Transmitter Utility v.1.7.0
 
Changes from Versions 1.6.1 to 1.7.0
 
  • Added support for the D850.
  • The current page number/total number of pages are now displayed at the top right corner of the Setup Utility.
  • Fixed an issue that caused only one type of profile (wireless LAN or Ethernet but not both) being imported from D750, D810, D810A, or D7200 cameras after their firmware was updated for compatibility with the WT-7.
Download: Wireless Transmitter Utility v.1.7.0
Posted to: Nikon News
Post Date: 9/6/2017 7:03:10 AM CT   Posted By: Sean
 Tuesday, May 30, 2017
From Nikon:
 
Capture NX-D 1.4.5
 
Changes from Version 1.4.3 to 1.4.5
 
  • Added support for the D7500.
  • Added support for Picture Control > Auto.
  • Changed the Crop tool 11:7 crop to 10:7.
  • Improved thumbnail display quality for JPEG images that contain only small thumbnails.
  • Fixed the following issues:
    • White would print as light grey when Use this profile when printing was selected for Color Management > Printer Profile.
    • Capture NX-D would quit unexpectedly if the Retouch Brush tool was displayed in full-screen view.
Download: Capture NX-D 1.4.5
 


ViewNX-i 1.2.7
 
Changes from Versions 1.2.4/1.2.5 to Version 1.2.7
 
  • Added support for the D7500.
  • Added support for Picture Control > Auto.
  • Fixed the following issues:
    • Facebook login could not be used.
    • Images modified using Exposure compensation or White balance with On selected for Auto Red-Eye would sometimes not display correctly.
Download: ViewNX-i 1.2.7
 


Camera Control Pro 2.25.0
 
Changes from Version 2.24.0 to 2.25.0
 
  • Added support for the D7500.
  • Picture Control Utility 2 can now be launched from a Picture Control > Edit button in the Image Processing panel.
Download: Camera Control Pro 2.25.0
 


Picture Control Utility 2.3.0
 
Changes from Version 2.2.2 to 2.3.0
 
  • Added support for the D7500.
  • With the release of Camera Control Pro 2 version 2.25.0, Picture Control Utility 2 can now be launched using the Edit button next to Picture Control in the Camera Control Pro 2 Image Processing panel.
Download: Picture Control Utility 2.3.0
Posted to: Nikon News
Post Date: 5/30/2017 5:37:02 AM CT   Posted By: Sean
 Tuesday, December 6, 2016
From Nikon:
 
Changes from Version 1.0.1 to 1.0.2
 
  • Fixed an issue that resulted in the application not displaying correctly at some monitor resolutions.
  • Fixed an issue that resulted in previews of selected images not being displayed at startup when the KeyMission 360/170 Utility was launched from ViewNX-i.
Download: Nikon KeyMission 360/170 Utility 1.0.2
 
B&H carries Nikon KeyMission cameras.
Posted to: Nikon News
Post Date: 12/6/2016 5:20:15 AM CT   Posted By: Sean
 Wednesday, November 23, 2016
From Nikon:
 
Capture NX-D 1.4.3
 
Changes from Version 1.4.2 to 1.4.3
 
  • Added support for the D5600.
  • Added a Size of Text and Icon option to Preferences > View.
  • Preferences > Open With Application now offers the following Conversion Format options for images opened using the selected application: JPEG, TIFF (8 Bit), and TIFF (16 Bit).
  • The print dialog now offers Use thumbnail data (draft mode) and Specify color profile options.
  • The Print information item in the print dialog now offers User Comment and Lens options.
  • Fixed the following issues:
    • Adjustments saved using the Register Updated Adjustments option in the Adjustments section of the Edit panel would not be correctly applied if the saved adjustments were selected after Capture NX-D was restarted.
    • NEF (RAW) images saved to NAS could not be edited.
    • The colors in images opened in Capture NX-D would differ from those of images opened in other applications such as Capture NX 2 or View NX 2.
Download: Capture NX-D 1.4.3
 


ViewNX-i 1.2.4
 
Changes from Version 1.2.3 to 1.2.4
 
  • Added support for the D5600.
  • Print > Advanced Print Information Settings now offers a Lens option.
  • The colors of the Map pins have been changed to make them easier to see.
  • The Convert Files and Contact Sheet options, formerly accessed via Export in the output bar, have been given their own icons.
  • The KeyMission 360/170 Utility can now be launched from the output bar.
  • Photos and movies shot with the KeyMission 360 are now identified with different icons.
  • Fixed an issue that sometimes resulted in the Folder Naming option not being applied when sub-folders were created in the destination folder for the Convert Files option.
Download: ViewNX-i 1.2.4
 


Picture Control Utility 2.2.2
 
Changes from Version 2.2.1 to 2.2.2
 
  • Added support for the D5600.
Download: Picture Control Utility 2.2.2
 


Camera Control Pro 2.24.0
 
Changes from Version 2.23.1 to 2.24.0
 
  • Added support for the D5600.
  • Added support for Custom Setting d3: Limit release mode selection on D5 cameras.
  • The lens type (G, E, D, etc.) for lenses mounted on an FT1 is no longer included in the lens name when a Nikon 1 V3 camera is connected.
  • Fixed an issue that resulted in type E lenses mounted on Nikon digital SLR cameras being listed as type G.
Download: Camera Control Pro 2.24.0
Posted to: Nikon News
Post Date: 11/23/2016 5:45:50 AM CT   Posted By: Sean
 Thursday, November 17, 2016
From Nikon:
 
Changes from Version 1.0.0 to 1.0.1
 
  • Improved the loading of thumbnail images when folders are selected under Play > Camera.
Download: KeyMission 360/170 Utility v.1.0.1
 
B&H carries Nikon KeyMission action cameras.
Posted to: Nikon News
Post Date: 11/17/2016 6:51:04 AM CT   Posted By: Sean
 Wednesday, August 17, 2016
Nikon has just udpated several programs as a result of the D3400's announcement. You can find the details below.
 
Capture NX-D 1.4.2
 
Changes from Version 1.4.1 to 1.4.2
 
  • Added support for the D3400 and COOLPIX W100.
  • Fixed the following issues:
    • Capture NX-D would show images marked with a label or rating in ViewNX-i as having been edited.
    • Photos taken with the D500 would be converted to gray images if Convert Files was used after Fisheye was applied.
    • Images modified and saved in other format in Capture NX-D after labels had been applied in ViewNX-i could not be opened in Capture NX 2.
Download: Capture NX-D 1.4.2
 


ViewNX-i 1.2.3
 
Changes from Version 1.2.2 to 1.2.3
 
  • Added support for the D3400 and COOLPIX W100.
  • A Close Filmstrip option is now available in the Viewer Settings for Image Viewer and Full Screen modes.
  • You can now make playback controls always visible during movie playback.
  • Fixed an issue that caused the lens type for pictures taken with type E lenses mounted on the D4S or earlier Nikon D-SLR cameras to be listed as type G in the camera info display.
  • A Movies item has been added to the Options menu giving you the option of selecting Favor frame rate.
Download: ViewNX-i 1.2.3
 


Picture Control Utility 2.2.1
 
Changes from Version 2.2.0 to 2.2.1
 
  • NEF (RAW) photos taken with the D3400 can now be used as preview images.
  • Scales can now be displayed on sliders at all times.
Download: Picture Control Utility 2.2.1
 


NEF Codec 1.29.0
 
What’s New with Version 1.29.0
 
  • Added support for NEF (RAW) images created with the D3400.
Download: NEF Codec 1.29.0
Posted to: Nikon News
Post Date: 8/17/2016 6:37:28 AM CT   Posted By: Sean
 Wednesday, June 29, 2016
From Nikon:
 
Changes from Version 1.2.1 to 1.2.2
 
  • Upload of MP4 files to NIKON IMAGE SPACE is now supported.
  • Fixed the following issue:
    • The Convert Files option in ViewNX-i would produce solid gray images when applied to photos shot with the D500 and later processed using the Fisheye option in Capture NX-D.
Download: ViewNX-i v.1.2.2
Posted to: Nikon News
Post Date: 6/29/2016 8:36:02 AM CT   Posted By: Sean
 Friday, June 24, 2016
From Nikon:
 
Changes from Version 2.23.0 to 2.23.1
 
Added support for D5 firmware C version 1.10, including the following features:
 
  • Dynamic-area AF (9 points)
  • Electronic VR
  • Flicker reduction
  • Movies with files sizes over 4 GB
Download: Camera Control Pro 2 v.2.23.1
Posted to: Nikon News
Post Date: 6/24/2016 8:12:28 AM CT   Posted By: Sean
 Monday, May 9, 2016
From Nikon:
 
Changes from ViewNX-i Version 1.2.0 to 1.2.1
 
  • Added support for the COOLPIX B500 and A300.
  • Added support for MP4 movies.
  • Added ranges to the sliders in the Adjustments/Metadata palette.
  • The sliders in the Adjustments/Metadata palette can now be reset by clicking the mark that indicates the default position.
Download: Nikon ViewNX-i v.1.2.1
 


Changes from Capture NX-D Version 1.4.0 / 1.4.0a to 1.4.1
 
  • Added support for the COOLPIX B500 and A300.
  • Added a View menu to Preferences for a custom grid display.
  • Added perspective control to the Straighten tool.
  • Sliders now show increments at all times.
  • Fixed an issue that caused blurring when Noise Reduction > Better Quality 2013 was applied to NEF (RAW) photos taken with the D610.
Download: Nikon Capture NX-D 1.4.1
Posted to: Nikon News
Post Date: 5/9/2016 5:27:00 AM CT   Posted By: Sean
 Friday, March 25, 2016
From Nikon:
 
What’s New with Version 1.28.0
 
  • Added support for NEF (RAW) files created with the D5.
Download: NEF Codec v.1.28.0
 
B&H has the Nikon D5 available for preorder.
Posted to: Nikon News
Post Date: 3/25/2016 5:22:48 AM CT   Posted By: Sean
 Wednesday, March 23, 2016
From Nikon:
 
ViewNX-i 1.2.0
 
Changes from Version 1.1.0 to 1.2.0
 
  • Added support for the D5.
  • Added an Auto0 white balance option (available with the D5 only).
  • Image adjustment sliders in Adjustments now always show scales and default values.
  • Added an NEF (RAW) Processing menu to Options.
  • The following items are available in the NEF (RAW) Processing menu in Options:
    • Color Space for Color Reproduction
    • Sizes Medium/Small for NEF (RAW) Images
    • Color Reproduction Process
Download: ViewNX-i 1.2.0
 


Capture NX-D 1.4.0
 
Changes from Version 1.3.0 to 1.4.0
 
  • Added support for the D5.
  • Added an Auto 0 white balance option (available with the D5 only).
  • Added an Auto Retouch Brush Tool to the toolbar.
  • The effects of noise reduction are now visible at all zoom ratios.
  • Added an Include areas where there is no image data option to the Camera and Lens Corrections > Fisheye tool in the edit list.
  • The default image quality for files converted to JPEG using Convert Files has been changed from 60 to 85.
  • Added the following preferences:
    • Sizes Medium/Small for NEF (RAW) Images
    • D1X RAW Default
    • Color Space for Color Reproduction
  • Fixed the following issues:
    • The Open with button and menu option were not available with images created in Capture NX 2.
    • Floppy disk drives (FDD) would sometimes be accessed during batch processing.
    • The application would sometimes quit unexpectedly if a folder containing images created with non-Nikon cameras was selected.
    • The clarity value for Custom Picture Controls would sometimes not be reflected.
    • NEF (RAW) photos shot with Df or D4 cameras at low ISO sensitivities (Lo 0.3-Lo 1) would brighten if saved using the Convert File option after white balance was adjusted using the gray point sample tool.
    • Some security software would interfere with batch processing.
  • The 64-bit edition of Camera Control Pro 2 can now be accessed using the Open with Camera Control Pro 2 option in the File menu.
Download: Capture NX-D 1.4.0
 


Wireless Transmitter Utility 1.6.1
 
Changes from Versions 1.5.5 to 1.6.1
 
  • The D5 and D500 are now supported.
  • The WT-7 and WT-6 wireless transmitters are now supported.
  • Turkish is now supported.
  • Windows 10 is now supported.
Cautions for Users of the UT-1
 
  • When a UT-1 is connected to a D4 or D7000 camera, the software will in addition to the Transfer mode and PC mode options display Thumbnail select mode and Print mode options, but latter-named two options cannot be used.
  • When using the Wireless Transmitter Utility to configure connection settings for a D4S, D4, or D7000, be sure to select WT-4/UT-1 (functions as WT-4) when prompted to select hardware.
  • When using the Wireless Transmitter Utility to configure connection settings for a D7100 or D800/D800E (firmware versions A 1.10/B 1.10), be sure to select Wired LAN when prompted to select hardware. If you are using a UT-1 with a WT-5 wireless transmitter, select WT-5 (wireless LAN).
  • When using a D4S or D4 with the UT-1, select WT-4 for Network > Choose hardware in the camera SETUP MENU.
Download: Wireless Transmitter Utility 1.6.1
Posted to: Nikon News
Post Date: 3/23/2016 6:23:46 AM CT   Posted By: Sean
 Wednesday, February 10, 2016
From Nikon:
 
Changes from Version 1.0.1 to 1.1.0a (Windows)
 
  • Picture Control Utility 2 is now installed with ViewNX-i.
  • Added an Edit workspace and an Adjustments palette for retouch features similar to those in ViewNX 2.
  • Fixed an issue that caused the ViewNX-i Show Focus Point option to display the focus point in a position that differed from that shown in the D750 viewfinder focus point display.
  • Fixed an issue that caused installation of ViewNX i to fail with the message, “This action is only valid for products that are currently installed.”
  • Added support for Turkish.
  • Added support for Windows 10.
Download: Nikon ViewNX-i for Windows v.1.1.0a
Posted to: Nikon News
Post Date: 2/10/2016 5:33:26 AM CT   Posted By: Sean
 Wednesday, February 3, 2016
The latest version of Nikon's Distortion Control Data adds support for the D5.
 
From Nikon:
 
Compatible cameras
 
CameraSupported from
firmware version
D5C:1.00
D4SC:1.00
D4A:1.10, B:1.10
D810AC:1.00
D810C:1.00
D800EA:1.10, B:1.10
D800A:1.10, B:1.10
DfC:1.00
D750C:1.00
D610C:1.01
D600C:1.02
D500C:1.00
D7200C:1.00
D7100C:1.02
D7000A:1.04, B:1.05
D5500C:1.00
D5300C:1.00
D5200C:1.02
D3300C:1.00
D3200C:1.03
D90A:1.00, B:1.01

Download: Nikon Distortion Control Data 2 v.2.013
Posted to: Nikon News
Post Date: 2/3/2016 5:46:13 AM CT   Posted By: Sean
 Tuesday, January 19, 2016
From Nikon:
 
Changes from Version 1.3.0 to 1.3.1
 
  • Renaming folders created in root directory (under startup disk) has been made unable in order to prevent images stored in the folders from being deleted.
Download: Nikon Capture NX-D v.1.3.1 for Mac
Posted to: Nikon News
Post Date: 1/19/2016 10:03:02 AM CT   Posted By: Sean
 Thursday, May 28, 2015
From Nikon:
 
What’s New with Version 1.27.0
 
  • The codec now supports NEF (RAW) photos shot with the D810A and Nikon 1 J5.
  • Fixed issue in which NEF (RAW) images could no longer be displayed after file info had been edited in the “Details” tab of the Explorer “Properties” window.
Download: Nikon NEF Codec Version 1.27.0
Posted to: Nikon News
Post Date: 5/28/2015 1:25:51 PM CT   Posted By: Sean
 Wednesday, March 18, 2015
From Nikon:
 
Modifications enabled with Ver. 2.21.0
 
  • Support for the D7200 has been added.
  • A Show ViewNX-i option has been added to the Tools menu.
  • A Show it with ViewNX-i option has been added to the When a new image is received from the camera item in the Transfer Options dialog accessed from the Tools menu > Transfer Options….
  • Windows Vista is no longer supported.
Download: Camera Control Pro v2.21.0
Posted to: Nikon News
Post Date: 3/18/2015 12:27:38 PM CT   Posted By: Sean
 Tuesday, March 17, 2015
From Nikon:
 
Nikon Capture NX-D v. 1.2.0
 
Modifications enabled with Ver. 1.2.0:
 
  • Support for RAW images captured with the D7200 has been added.
  • An Open with ViewNX-i option has been added to the File menu.
  • An Open with ViewNX-i tool (icon) has been added to the toolbar.
  • When NEF-format images were converted to a different format after cropping, the portion of the image remaining after conversion did not always correspond to the actual crop applied. This issue has been resolved.
  • Windows Vista is no longer supported.
Download: Nikon Capture NX-D v. 1.2.0
 


Picture Control Utility 2.1.0
 
Updates included in this 2.1.0 download:
 
Updates that apply to both the Windows and Macintosh versions
 
  • Support for the D7200 and COOLPIX P900 has been added.
Updates that apply to the Windows versions only:
 
  • Windows Vista is no longer supported.
Download: Picture Control Utility 2.1.0
Posted to: Nikon News
Post Date: 3/17/2015 11:46:57 AM CT   Posted By: Sean
 Tuesday, January 27, 2015
From Nikon:
 
Updates included with 1.1.0
 
Modifications that apply to both the Windows and Macintosh versions:
 
  • Support for the D5500, COOLPIX S3700, S2900, L32 and L31 has been added.
  • When Capture NX-D is used to edit files that were once edited with Capture NX 2, additional adjustment of editing performed with Capture NX 2 is now possible.
  • However, only items in the Develop section of the Capture NX 2 Edit List can be adjusted with Capture NX-D. In addition, images that have been edited using Color Efex Pro may be edited after settings are reverted to their original values.
  • A PF Flare Control item has been added to the Camera and Lens Corrections palette.
  • This item can be used to reduce flare (ring flare, circular flare, etc.) caused by bright light sources in images captured with compatible lenses.
  • A Revert to Last Saved State option has been added to the Adjust menu.
  • This option resets adjustments applied with Capture NX-D.
  • A Launch Camera Control Pro 2 option has been added to the Tool menu.
The following issues have been resolved.
 
  • When images to which Distortion Control has been applied are opened, edges were fringed with color.
  • When Noise Reduction was applied, the application would quit unexpectedly.
  • When a RAW image captured with a camera that does not support the Picture Control system (D2XS, D2X, D2HS, D2H, D1X, D1H, D1, D200, D100, D90, D80, D70S, D70, D60, D40X, D40) was displayed, the icon indicating that the image had been edited was displayed, even if the image had not actually been edited.
  • When Quick Adjust was applied to RAW images captured at a Picture Control setting of Neutral, Flat, or Monochrome, and for which Recorded Value was selected in the Picture Control palette, the Quick Adjust value reverted back to "0.00" when the images were again displayed in Capture NX-D after the application was once closed and then launched again.
  • A Noise Reduction setting of Better Quality 2013 could be selected for JPEG and TIFF images.
Additional modifications to the Windows version
The following issues have been resolved.
 
  • Multiple images in the My Pictures folder could not be selected to copy or move under Windows 7 or an earlier operating system.
  • When files were saved with different file names using the Convert Files function, the new file names were not accurately reflected.
Additional modifications to the Macintosh version
 
  • Support for OS X version 10.10.1 has neen added.
  • OS X version 10.7.5 is no longer supported.
Download Nikon Capture NX-D 1.1.0
Post Date: 1/27/2015 2:37:23 PM CT   Posted By: Sean
 Tuesday, October 14, 2014
From Nikon:
 
Updates included with 1.0.3
 
Updates that apply to both the Windows and Macintosh versions
 
  • When images were adjusted in any of the following ways using Edit palette functions, and Capture NX-D was then launched again, the results of adjustments were not reflected. This issue has been resolved.
  • When White Balance was fine-tuned after selecting Use Gray Point or using the Gray Point Sample Tool
  • When the Quick Adjust setting under Picture Control was changed
  • When the luminosity curve was adjusted by moving the black-point input slider to a setting other than "0" with Master Lightness selected for LCH
  • When the chroma curve was adjusted by moving the output slider to a setting other than "0" with Chroma selected for LCH
  • When the tone curve was adjusted by moving the Levels & Curves black-point input slider to a setting other than "0"
  • When a settings file, with which the Quick Adjust setting under Picture Control had been changed, was saved, the value saved for Quick Adjust only was "0". This issue has been resolved.
  • When RAW images captured with cameras that support the Better Quality 2013 option for Noise Reduction in the Edit palette were adjusted, and the Intensity setting under Luminance was once changed to "0", subsequent changes to the Intensity setting were not reflected. This issue has been resolved.
  • When the output slider was moved to a setting other than "0" with Chroma selected for LCH in the Edit palette, anchor points could not be added to the chroma curve at the intended positions. This issue has been resolved.
  • When multiple images were captured with a User Custom Curve modified using a camera that does not support Picture Controls applied, changes made to the User Custom Curve during shooting were not reflected in images captured after the User Custom Curve had been changed. This issue has been resolved.
Additional modifications to the Windows version
 
  • When Capture NX-D was launched with a single-display system after having been used with a multi-display system, an error was displayed and the application could not be launched. This issue has been resolved.
  • An issue that sometimes caused Capture NX-D to freeze when keyboard operations were performed while working with the Edit palette has been resolved.
Additional modifications to the Macintosh version
 
  • When the keyboard shortcut (SHIFT + 0) was used to delete ratings, labels rather than ratings were deleted. This issue has been resolved.
Download
Capture NX-D 1.0.3 Update
Posted to: Nikon News
Post Date: 10/14/2014 10:54:59 AM CT   Posted By: Sean
 Friday, October 10, 2014
From Nikon:
 
Updates included with 1.0.2
 
  • Support for the D750 has been added.
  • When File > Convert Files... was used to convert images to JPEG or TIFF format with the Resolution box under Output settings checked, resolution in the converted files was reduced. This issue has been resolved.
Download
Nikon Capture NX-D 1.0.2
Posted to: Nikon News
Post Date: 10/10/2014 11:56:21 AM CT   Posted By: Sean
 Wednesday, September 17, 2014
Nikon has just released Camera Control Pro 2.19.0 and Wireless Transmitter Utility 1.5.2 with support for the D750.
 
Download
Camera Control Pro 2.19.0
Wireless Transmitter Utility 1.5.2
Posted to: Nikon News
Post Date: 9/17/2014 11:39:30 AM CT   Posted By: Sean
 Tuesday, September 16, 2014
Nikon has added D750 support to View NX 2, Capture NX-D and Picture Utility Control 2. See below for update links.
 
Download Software Updates
 
B&H has the Nikon D750 available for preorder.
Posted to: Nikon News
Post Date: 9/16/2014 10:51:42 AM CT   Posted By: Sean
 Tuesday, July 29, 2014
From Nikon:
 
This is the Capture NX-D 1.0.1 software download - This is a update installer for Windows systems only.
 
Updates included with 1.0.1

  • When the 64-bit Windows version of the application was used to create JPEG-format files converted from RAW (.NEF/.NRW), TIFF, or JPEG images using the Convert Files... or Run Batch Process... option in the File menu, a gray band was sometimes visible at the bottom of the images when they were opened in the 64-bit Windows version of Capture NX-D. This issue has been resolved.

Download Capture NX-D 1.0.1 for Windows.

Posted to: Nikon News
Post Date: 7/29/2014 10:23:10 AM CT   Posted By: Sean
 Thursday, July 17, 2014
From Nikon:
 
Camera Control Pro - 2.18.0 Update
 
Precautions

  • This updater software updates Camera Control Pro 2.13.0 -2.17.0 to 2.18.0.
  • Camera Control Pro 2.13.0 - 2.17.0 must be installed before running this software.
  • When this updater software is run, it may be necessary to enter the product key again to confirm ownership of a previous version of the software.
  • On a Macintosh running Mac OS X version 10.7-10.9, run this updater software and then enter the application’s product key.
  • Turn off all virus-scanning software and exit Camera Control Pro 2, or any other application that may be running, before proceeding with this installation.
  • You must have Administrator authority to run this updater software on a Windows computer. You must enter the Admin password to run this updater software on a Macintosh computer.
  • This updater software cannot be used to install a different language version, or to modify the language version, of the application currently installed.

Updates included with this release, 2.18.0
 
Modifications that apply to both the Windows and Macintosh versions

  • Support for the D810 has been added.
  • Highlight-weighted has been added to Metering options in the Exposure 2 tab (available only when the D810 is used).
  • Metering options have been added to the Movie tab (available only when the D810 is used).
  • Flat has been added to Picture Control options in the Image Processing tab. (available only when the D810 is used).
  • A Clarity setting has been added to the adjustment dialog displayed when the Edit... button in the Image Processing tab is clicked. (available only when the D810 is used).
  • A Show Capture NX-D option has been added to the Tools menu.

Additional modifications to the Windows version

  • Windows XP is no longer supported.

Additional modifications to the Macintosh version

  • Mac OS X version 10.6 is no longer supported.

Download Camera Control Pro - 2.18.0 Update – Windows | Macintosh
 
Wireless Transmitter Utility 1.5.1
 
Precautions
 
Modifications enabled with version 1.5.1
 
Modifications that apply to both the Windows and Macintosh versions

  • Support for the D810 has been added.
  • Support for the Communication Unit UT-1 Firmware Ver. 2.1 has been added.

Additional modifications to the Windows version

  • Windows XP is no longer supported.

Download Wireless Transmitter Utility 1.5.1 – Windows| Macintosh
 
B&H has the Nikon D810 DSLR Camera available for preorder.

Posted to: Nikon News
Post Date: 7/17/2014 8:37:55 AM CT   Posted By: Sean
   
Archives
2019   Jan   Feb   Mar   Apr   May   Jun   Jul
2018   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2017   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2016   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2015   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2014   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2013   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2012   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2011   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2010   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2009   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2008   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2007   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2006   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2005   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
Help  |  © 2019 The Digital Picture, LLC  |  Bryan CarnathanPowered By Christ!