Canon Releases EOS C700 / C700PL, C700 GS PL, C700FF and EOS C300 Mark II / C300 PL Mark II Firmware Updates

From Canon:

Canon EOS C700 - EOS C700 PL: Firmware Version 1.0.7.1.00

Firmware Version 1.0.7.1.00 incorporates the following fixes and enhancements:

  • Peripheral illumination / chromatic aberration correction has been added for the following lenses:
    • EF Cinema Lens: CN-E20mm T1.5 L F
    • EF Lens: EF 70-200mm f/4L IS II USM

  • Chromatic aberration correction has been added for the following EFP lenses:
    • CJ45e×9.7B IASE-V H
    • CJ45e×13.6B IASE-V H

  • Support for these EFP lenses has been added:
    • CJ24e×7.5B IASE S
    • CJ18e×7.6B IRSE S / IASE S
    • CJ14e×4.3B IRSE S / IASE S

  • Enables AF/ face detection mode to be used during Super16mm sized (2K crop) recording.
  • For LUTs that can be applied to output footage, support for the ITU-R BT.2100 standard and ITU-R BT.2408 report have been added for the following terminals:
    • SDI OUT terminal
    • HDMI OUT terminal
    • [HDR-PQ(OOTF On /Off)] will change to [HDR-PQ*1].
    • Changes have been made so that the [HDR: PQ] and [HDR: HLG] base luminance correspond to Diffuse White (100%) being 203nits*2.
    • VIDEO terminal (optional Viewfinder)
    • [HDR1600%(OOTF On /Off)] will change to [HDR-1600%*1].
    • [HDR400%(OOTF On /Off)] will change to [HDR-400%*1].

  • Support for the [Reset] function that resets the clip number when the reel number is set, has been added.
  • Fixes a phenomenon in which signal outputting of more than 100% occurs when in the HLG output of LUT.
    • LUT: HDR-HLG output
    • Color Space: BT.2020

  • Three sets of customizable submenu [My Menu] functions have been added.
  • 4X magnification has been added.

*1 :OOTF On
*2 The brightness before the change to OOTF On 83nits/OOTF Off 111nits
The HLG output is the brightness in the case of displaying on a 1000nits monitor.
Please use the Canon lookup table that is released on and after November, 2018.

Caution:

  • Firmware Version 1.0.7.1.00 is for updating Cinema EOS C700 cameras running firmware version 1.0.0.1.00-1.0.6.1.00. If your camera’s firmware is already version 1.0.7.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
  • For customers who are using the optional OU-700 Remote Operation Unit, the firmware of the camera and the OU-700 Remote Operation Unit have to be the same. After updating the camera firmware, connect the camera with the OU-700 to update the firmware of the OU-700 from the camera's system settings.

Preparations for a firmware update:

  • You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 128MB or more for the firmware update.
  • After the Firmware update has been performed, the camera’s menu settings and Custom Picture settings will be reset. It is recommended that users save their menu and Custom Picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the camera’s user manual titled Saving and Loading Camera Settings.
  • The downloaded firmware folder contains the firmware (File Name: VMA7.FIM, File Size: 112,296,156 bytes) and a procedure manual for updating the firmware (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Please check the firmware update procedure manual carefully before starting update operations.

Download: Firmware Version 1.0.7.1.00 for the EOS C700 and EOS C700 PL



EOS C700 GS PL: Firmware Version 1.0.5.1.00

Firmware Version 1.0.5.1.00 incorporates the following fixes and enhancements:

  • Peripheral illumination / chromatic aberration correction has been added for the following lenses:
    • EF Cinema Lens: CN-E20mm T1.5 L F
    • EF Lens: EF 70-200mm f/4L IS II USM

  • Chromatic aberration correction has been added for the following EFP lenses:
    • CJ45e×9.7B IASE-V H
    • CJ45e×13.6B IASE-V H

  • Support for these EFP lenses has been added:
    • CJ24e×7.5B IASE S
    • CJ18e×7.6B IRSE S / IASE S
    • CJ14e×4.3B IRSE S / IASE S

  • For LUTs that can be applied to output footage, support for the ITU-R BT.2100 standard and ITU-R BT.2408 report have been added for the following terminals:
    • SDI OUT terminal
    • HDMI OUT terminal
    • [HDR-PQ(OOTF On /Off)] will change to [HDR-PQ*1].
    • Changes have been made so that the [HDR: PQ] and [HDR: HLG] base luminance correspond to Diffuse White (100%) being 203nits*2.
    • VIDEO terminal (optional Viewfinder)
    • [HDR1600%(OOTF On /Off)] will change to [HDR-1600%*1].
    • [HDR400%(OOTF On /Off)] will change to [HDR-400%*1].
    • Support for the [Reset] function that resets the clip number when the reel number is set, has been added.
    • Fixes a phenomenon in which signal outputting of more than 100% occurs when in the HLG output of LUT.
    • Three sets of customizable submenu [My Menu] functions have been added.
    • 4X magnification has been added.

*1 :OOTF On
*2 The brightness before the change to OOTF On 83nits/OOTF Off 111nits
The HLG output is the brightness in the case of displaying on a 1000nits monitor.
Please use the Canon lookup table that is released on and after November, 2018.

Caution:

  • Firmware Version 1.0.5.1.00 is for updating Cinema EOS C700 cameras running firmware version 1.0.0.1.00 – 1.0.4.1.00. If your camera’s firmware is already version 1.0.5.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
  • For customers who are using the optional OU-700 Remote Operation Unit, the firmware of the camera and the OU-700 Remote Operation Unit have to be the same. After updating the camera firmware, connect the camera with the OU-700 to update the firmware of the OU-700 from the camera's system settings.

Preparations for a firmware update:

  • You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 128MB or more for the firmware update.
  • After the Firmware update has been performed, the camera’s menu settings and Custom Picture settings will be reset. It is recommended that users save their menu and Custom Picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the camera’s user manual titled Saving and Loading Camera Settings.
    • The downloaded firmware folder contains the firmware (File Name: VMB5.FIM, File Size: 112,296,156 bytes) and a procedure manual for updating the firmware (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Please check the firmware update procedure manual carefully before starting update operations.

The following items are required to perform this firmware update:

  1. A Cinema EOS C700GSPL camera body
  2. A computer (OS: Windows 10, Windows 8.1, Windows 8, Windows 7 SP1 or Mac OS X (10.7-10.14).
  3. A 128 MB or higher-capacity SD/SDHC/SDXC memory card (both commercially available)
  4. An SD card reader-writer (commercially available) or an SD card slot on the computer.
  5. Fully charged V-mount battery (commercially available), 14.8 V DC (acceptable range: 12 V to 20 V DC)
  6. Power adapter (commercially available, DC IN 12V terminal): 4-pin XLR plug (female connector), 12 V DC (acceptable range: 11.5 V to 20 V DC), 10 A (acceptable maximum load current)
  7. The firmware (the file downloaded from the Canon Web site)
Download: Canon Firmware Version 1.0.5.1.00 for the EOS C700 GS PL



Canon EOS C700FF: Firmware Version 1.0.1.1.00

Firmware Version 1.0.1.1.00 incorporates the following fixes and enhancements:

  • Chromatic aberration correction has been added for the following EFP lenses:
    • CJ45e×9.7B IASE-V H
    • CJ45e×13.6B IASE-V H

  • Support for these EFP lenses has been added.
    • CJ24e×7.5B IASE S
    • CJ18e×7.6B IRSE S / IASE S
    • CJ14e×4.3B IRSE S / IASE S

  • For LUTs that can be applied to output footage, support for the ITU-R BT.2100 standard and ITU-R BT.2408 report have been added for the following terminals:
    • SDI OUT terminal
    • HDMI OUT terminal
    • [HDR-PQ(OOTF On /Off)] will change to [HDR-PQ*1].
    • Changes have been made so that the [HDR: PQ] and [HDR: HLG] base luminance correspond to Diffuse White (100%) being 203nits*2.
    • VIDEO terminal (optional Viewfinder)
    • [HDR1600%(OOTF On /Off)] will change to [HDR-1600%*1].
    • [HDR400%(OOTF On /Off)] will change to [HDR-400%*1].

  • Fixes a phenomenon in which signal outputting of more than 100% occurs when in the HLG output of LUT.
    • LUT: HDR-HLG output
    • Color Space: BT.2020

  • Support for Double slot recording in Full Frame sensor mode has been added for the following settings:
    • XF-AVC 59.94P/50P
    • ProRes 59.94P/50P

*1 :OOTF On
*2 The brightness before the change to OOTF On 83nits/OOTF Off 111nits
The HLG output is the brightness in the case of displaying on a 1000nits monitor.
Please use the Canon lookup table that is released on and after November, 2018.

** Double slot recording cannot be used together with relay recording, or with slow & fast motion recording. Refer to the Instruction manual for more details.

Caution:

  • Firmware Version 1.0.1.1.00 is for updating Cinema EOS C700 cameras running firmware version 1.0.0.1.00. If your camera’s firmware is already version 1.0.0.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
  • For customers who are using the optional OU-700 Remote Operation Unit, the firmware of the camera and the OU-700 Remote Operation Unit have to be the same. After updating the camera firmware, connect the camera with the OU-700 to update the firmware of the OU-700 from the camera's system settings.

Preparations for a firmware update:

  • You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 128MB or more for the firmware update.
  • After the Firmware update has been performed, the camera’s menu settings and Custom Picture settings will be reset. It is recommended that users save their menu and Custom Picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the camera’s user manual titled Saving and Loading Camera Settings.
  • The downloaded firmware folder contains the firmware (File Name: VMI2.FIM, File Size: 112,225,000 bytes) and a procedure manual for updating the firmware (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Please check the firmware update procedure manual carefully before starting update operations.

Download: Canon Firmware Version 1.0.1.1.00 for the EOS C700FF



Canon EOS C300 Mark II / EOS C300 Mark II PL: Firmware Version 1.1.2.1.00

Firmware Version 1.1.2.1.00 incorporates the following enhancements and fixes:

  • Peripheral illumination / chromatic aberration correction has been added for the following lenses:
    • EF Cinema Lens: CN-E20mm T1.5 L F
    • EF Lens: EF 70-200mm f/4L IS II USM

  • Support for the [Reset] function that resets the clip number when the reel number is set, has been added.
  • Fixes a phenomenon in which joy stick operation does not reverse in Mirror mode for the LM-V1.
  • Fixes a phenomenon in which a green image may display when using OLED Viewfinder EVF-V70.
  • Optimizes the [Black Gamma] compensation when [Normal 1] to [Normal 4] is set for [Gamma] in the Custom Picture settings.
  • Optimizes color accuracy in areas of high brightness when [Normal 1] to [Normal 4] is set for [Gamma] in the Custom Picture settings.

Caution:

  • Firmware version 1.1.2.1.00 is for updating Cinema EOS C300 Mark II cameras running firmware version 1.0.0.1.00 - 1.1.1.1.00. If your camera's firmware is already version 1.1.2.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
  • Please note that after updating the camera to Firmware Version 1.0.6.1.00 or later, if you wish to continue using CFast (VPG130) cards that were used before the firmware update, you will need to format the CFast cards with the camera. After the firmware update, and before formatting the CFast cards with the camera, make sure to back up the clips saved to the CFast cards.

Preparations for a firmware update:

  • You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 64MB or more for the firmware update.
  • After the firmware update has been performed, the camera's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings".
  • The downloaded folder contains the firmware (file name: VLB3.FIM / file size: 43,843,616bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.

The following items are required to perform this firmware update:

  1. An EOS C300 Mark II or EOS C300 Mark II PL Digital Cinema Camera
  2. A computer (OS requirements: Windows 10, Windows 8.1, Windows 8, Windows 7 SP1, Mac OS X 10.7 - 10.14)
  3. SD/SDHC/SDXC memory card with a capacity of 64 MB or more (commercially available)
  4. An SD card reader/writer (commercially available) or an SD card slot built into the computer
  5. A fully charged battery pack for the camera
  6. Compact power adapter bundled with the camera
  7. The firmware (the downloaded file)
Download: Canon Firmware Version 1.1.2.1.00 for the EOS C300 Mark II and for the EOS C300 Mark II PL

B&H carries the following:

Posted: 12/13/2018 1:38:52 PM ET   Posted By: Sean
Posted to: Canon News    Category: Canon Firmware Updates
Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Send Comments
Terms of Use, Privacy  |  © 2024 Rectangular Media, LLC  |  Bryan CarnathanPowered by Christ!