The Lowepro Lens Case 1W protects a long list of lenses including the ...
Canon EF 24-105mm L IS Lens without its hood
Canon EF 16-35mm f/2.8 L Lens without its hood
Canon EF 17-40mm f/4 L Lens without its hood
Canon EF-S 17-55mm f/2.8 IS USM Lens with its hood reversed
Canon EF 14mm f/2.8 L II Lens
Canon EF 24mm f/1.4 L Lens with its hood reversed
Canon EF 35mm f/1.4 L Lens with its hood reversed
Canon EF 50mm f/1.8 Lens with its hood in place
Canon EF 50mm f/1.4 Lens with its hood in place
Canon EF 85mm f/1.8 Lens with its hood reversed
Canon EF 135mm f/2 L Lens with its hood reversed (case is slightly short)
Canon EF 28-135mm f/3.5-5.6 IS Lens with its hood reversed
Canon EF-S 17-85mm f/4-5.6 IS Lens with its hood reversed
Tamron 28-75mm F/2.8 XR Di Lens without its hood reversed
And MANY other similar-sized lenses.
The Lowepro Lens Case 1W is a relatively small padded case that will protect your lens investment. Water-resistant 600D TXP™ outer fabric provides protection from wear.
The Lens Case 1W includes a SlipLock attachment - attach it to your camera bag or Lowepro Light Belt. These cases work very well SlipLocked. Slots are provided to attach one not-provided compression strap.
The interior size of the Lowepro Lens Case 1W is approximately 4"D x 5"H (10 x 12.5 cm).
My $.02 on lens cases ...
Everyone has their own preference for carrying their lenses and gear around. My personal decision has been to individually protect each lens in Lowepro Lens Cases.
My lenses represent a significant investment to me - I take excellent care of them. Acquiring the appropriate lens case for most of my lenses is the standard of storage protection I follow. The lens case investment is small - the protection is very good.
Lowepro Lens Cases are basically thick, slightly-rigid padded nylon pouches with a protective OverLap Zipper(tm) that goes most of the way around the top of the case.
When traveling by vehicle, I often place filled lens cases in a Pelican Case or even a strong Rubbermaid-type plastic storage box. They are well protected from impact and moisture - and the plastic storage container not a target for theft.
When I am carrying the lenses for possible use, I will typically SlipLock a Lowepro Lens Case or two to a Lowepro Toploader case (such as the Lowepro Toploader 75 AW) or a Lowepro Light Belt. This makes for a highly customizable setup. You can adjust your cases to take exactly what you need for the shoot.
Lowepro's SlipLock attachment is a series of flexible and semi-rigid nylon and Velcro tabs. The semi-rigid tab on the Lowepro Lens Case slides through a wide nylon web on a larger case or belt and Velcros back onto the Lowepro Lens Cases. An additional flexible nylon strap Velcros onto the back of the semi-rigid tab locking everything in place.
Bringing you this site is my full-time job (typically 60-80 hours per week). Thus, I depend solely on the commissions received from you using the links on this site to make any purchase. I am grateful for your support! - Bryan
Where you buy your gear matters. You expect to get what you ordered, and you want to pay a low price for it. The retailers I recommend below are the ones I trust for my purchases. Get your Lowepro Lens Case 1W now from:(Using the links on this site to make any purchase provides support for this site)