Using the RigWheels RigMount X4 for Automotive Photography

by Sean Setters

In my review of the RigWheels RigMount X4 Magnetic Camera Platform, I demonstrated how the mount could be used to capture a vehicle in motion (with blurred surroundings) while attached to the car being photographed. The example I created can be seen below.

Self Portrait with RigWheels RigMount X4 Magnet Camera Platform 1

Getting a shot like the example above is relatively easy and straightforward using the magnetic camera platform. But ever since posting the review, I had been wondering whether or not the RigMount X4 could be utilized to photograph a vehicle it wasn't attached to with a sharp vehicle and similarly blurred background. From a photographer's perspective, this type of situation would be ideal as the camera gear's safety and security remain the responsibility of the photographer rather than the driver of the subject car (assuming you're not using the X4 for a self-portrait like I was).

However, I knew that there would be several challenges involved in photographing a following vehicle, all of which can cause unwanted motion blur of the vehicle being photographed. To capture an acceptably sharp follow vehicle, the following would all need to happen simultaneously during the relatively long shutter duration:

  1. The car with the camera mount could not hit any significant bumps
  2. The follow car could not hit any significant bumps
  3. The follow car would need to maintain a constant distance from the lead/camera mounted car
I reasoned that using an image stabilized lens would help reduce the impact of small vibrations caused by the mount vehicle, but... it wouldn't be able to compensate for any noticeable bumps in the driving surface.

Unfortunately, there was another challenge to consider – lighting. If photographing on a bright, clear day, the single primary light source would not likely produce great results.

For instance, if driving into the sun, the lead vehicle's shadow would likely cast a distracting shadow into the scene. If the sun were camera right, the broad side of the subject vehicle as seen from the lead vehicle would be in shadow with, yet again, another distracting shadow cast into the middle of the frame. If driving away from the sun, then the bulk of the subject car would be in shadow. With the sun camera left, the broad side of the subject vehicle would have been well lit, but... I still wasn't sure that I'd be happy with the lead vehicle's shadow likely being visible in the frame.

Shooting at night seemed to be the best solution to the lighting problem. With street lights (and possibly head lights) providing the bulk of the lighting required for an exposure, the car could be lit from multiple angles with any shadows cast being less severe. Also, the direction of travel would be less of a concern, meaning that a wider variety of shooting locations would be available for consideration. As ideal nighttime lighting conditions would likely be sporadic on any given route (aside from a well lit parking lot), it was necessary to add "good lighting" to the ever-growing list of variables that had to fall in line for the desired final image.

Before attempting a nighttime shot, Alexis (the driver of the following vehicle) and I did a dry run during the day to determine which focal lengths and shutter speeds might work best. Tests with a shutter speed of 1/2 second never created a sharp-looking vehicle. We found that wider focal lengths and a relatively close vehicle in an adjacent lane with a 1/3 second shutter speed provided the most promising results. At 1/3 second, there were still only a few sharp images compared to the total images captured. However, the blur created at 1/3 second appeared significantly better at comfortable speeds than when using shorter shutter speeds.

Before I go any further, let me be clear – please use caution if attempting to photograph moving vehicles. Do what you can to minimize risks and always be alert to potential hazards and/or traffic conditions. We are not responsible for property damage and/or loss of life if you attempt to replicate the results.

How I Got the Shot

Because of its wide angle of view and image stabilization feature, I opted to use a Canon EF-S 10-18mm f/4.5-5.6 IS STM Lens paired with an Canon EOS 7D Mark II. The 7D II was not only a good camera choice because of its compatibility with the EF-S 10-18 IS STM, but it's built-in intervalometer feature made triggering the camera during the shooting runs very easy.

I mounted the camera and lens to a ball head attached to the RigMount X4 and – using the included (4) Long Magnetic Mounts – I affixed the rig to the driver's side back quarter panel of my car. With the road in front of my house free of traffic, I directed Alexis to a spot for optimal framing, manually focused on the car, made a few test shots to determine the proper exposure settings, and with the exposure settings determined, I set the camera's intervalometer to take a shot every second. With the camera triggered, I told Alexis to try and maintain a constant distance from the car when she could (while abiding by all traffic laws, of course).

The exposure settings used: 10mm, f/5, 1/3 sec., ISO 1000.

We ended up doing two 1/2 mile laps traveling down a four lane road featuring a decent number of street lights. After the first lap, we took a look at the images to see if there were any adjustments that might be made to improve our results. We determined that the follow vehicle needed to be just a little bit closer and a little more forward in relation to the lead car than the previous run. On the second lap, we got the shot atop this post. Out of the two laps, there were only a handful of acceptably sharp images (out of 400+) and only a couple of the shots featured decent lighting and optimal vehicle placement within the frame (making selection of the best shot a very easy task).

Conclusion

Can the RigWheels RigMount X4 be used to photograph a moving vehicle that it isn't attached to, with motion blurred surroundings and a sharp subject? In a word – "absolutely." However, planning, patience and persistence will be your allies in getting those results.

More Info: RigWheels RigMount X4 Magnetic Camera Platform Review

Posted: 3/23/2017 8:10:50 AM ET   Posted By: Sean
Posted to: Canon News, Sony News    Category: Photo Tips and Stories
Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Send Comments
Terms of Use, Privacy  |  © 2024 Rectangular Media, LLC  |  Bryan CarnathanPowered by Christ!