Wilcox Peak, Jasper National Park, Alberta

The Wilcox Pass Trail is one of the highest-rated trails in Jasper National Park (Alberta, Canada). While I have not hiked most of the trails in this park, I have hiked a lot of trails and can say that this is one of my favorites.
 
The 6.8 mile round trip hike (we stretched it closer to 10 miles) starts just below the tree line and quickly ascends above it into the alpine meadows. From that point on, the views are continuously excellent. The Athabasca Glacier, a significant toe of the Columbia Icefield, is always visible to the west and a multitude of mountain peaks surround the entire area.
 
For this hike, I opted to go light on the gear. I packed a single Canon EOS 5Ds R and a pair of lenses (Canon EF 16-35mm f/4L IS and EF 100-400mm f/4.5-5.6L IS II Lens) into a MindShift Gear BackLight 26L (I'm loving this pack – it goes everywhere with me) along with other essentials including food, water and additional clothing (always recommended when hiking at high altitudes – and needed on this hike).
 
If I hike this trail again, I will have a second camera body along as I spent too much time changing lenses. The primary driver for the lens changes were frequent wildlife encounters and telephoto landscape photo ops interspersed with wide angle landscape opportunities. To take advantage of all situations, I was constantly changing between the two lenses I brought.
 
Yes, another camera body would have added a bit of weight to my kit (the reason I didn't take it), but I probably exerted more energy changing lenses than I would have simply carrying the additional camera body. And, changing lenses at a high altitude often means wind, which often means risk of dust finding its way onto the sensor, leaving spots in the images. Fortunately, the 5Ds R did a great job of avoiding the dust and I had no cloning tasks to add to the post processing of this hike's take home.
 
I selected this image to share with you because I like how the lines in rock and the clouds point (lead the eye) to Wilcox Peak. As you likely already guessed, the 16-35mm f/4L IS was used to capture it.
 
Absent from my short gear list above is a tripod and for weight reasons, I was sans tripod on this hike. While the 1/80 second shutter speed may seem easily hand-holdable at 16mm even on a 5Ds R, that was not the case as the wind was very strong. Image stabilization proved quite valuable to me in this situation.


A larger version of this image is available on SmugMug, Flickr, Google+, Facebook, 500px and Instagram. If reading from a news feed reader, click through to see the framed image.

 
Camera and Lens Settings
16mm  f/11.0  1/80s
ISO 100
8688 x 5792px
Posted: 9/4/2016 7:22:29 AM ET   Posted By: Bryan
Posted to: Canon News, Sony News    Category: Photo Tips and Stories
Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Send Comments
Terms of Use, Privacy  |  © 2024 Rectangular Media, LLC  |  Bryan CarnathanPowered by Christ!