Nikon ViewNX-i, Capture NX-D & Wireless Transmitter Utility Updated with D5 Support

From Nikon:

ViewNX-i 1.2.0

Changes from Version 1.1.0 to 1.2.0

• Added support for the D5.
• Added an Auto0 white balance option (available with the D5 only).
• Image adjustment sliders in Adjustments now always show scales and default values.
• Added an NEF (RAW) Processing menu to Options.
• The following items are available in the NEF (RAW) Processing menu in Options:
• Color Space for Color Reproduction
• Sizes Medium/Small for NEF (RAW) Images
• Color Reproduction Process

Download: ViewNX-i 1.2.0

Changes from Version 1.3.0 to 1.4.0

• Added support for the D5.
• Added an Auto 0 white balance option (available with the D5 only).
• Added an Auto Retouch Brush Tool to the toolbar.
• The effects of noise reduction are now visible at all zoom ratios.
• Added an Include areas where there is no image data option to the Camera and Lens Corrections > Fisheye tool in the edit list.
• The default image quality for files converted to JPEG using Convert Files has been changed from 60 to 85.
• Added the following preferences:
• Sizes Medium/Small for NEF (RAW) Images
• D1X RAW Default
• Color Space for Color Reproduction
• Fixed the following issues:
• The Open with button and menu option were not available with images created in Capture NX 2.
• Floppy disk drives (FDD) would sometimes be accessed during batch processing.
• The application would sometimes quit unexpectedly if a folder containing images created with non-Nikon cameras was selected.
• The clarity value for Custom Picture Controls would sometimes not be reflected.
• NEF (RAW) photos shot with Df or D4 cameras at low ISO sensitivities (Lo 0.3-Lo 1) would brighten if saved using the Convert File option after white balance was adjusted using the gray point sample tool.
• Some security software would interfere with batch processing.
• The 64-bit edition of Camera Control Pro 2 can now be accessed using the Open with Camera Control Pro 2 option in the File menu.

Download: Capture NX-D 1.4.0

Changes from Versions 1.5.5 to 1.6.1

• The D5 and D500 are now supported.
• The WT-7 and WT-6 wireless transmitters are now supported.
• Turkish is now supported.
• Windows 10 is now supported.

Cautions for Users of the UT-1

• When a UT-1 is connected to a D4 or D7000 camera, the software will in addition to the Transfer mode and PC mode options display Thumbnail select mode and Print mode options, but latter-named two options cannot be used.
• When using the Wireless Transmitter Utility to configure connection settings for a D4S, D4, or D7000, be sure to select WT-4/UT-1 (functions as WT-4) when prompted to select hardware.
• When using the Wireless Transmitter Utility to configure connection settings for a D7100 or D800/D800E (firmware versions A 1.10/B 1.10), be sure to select Wired LAN when prompted to select hardware. If you are using a UT-1 with a WT-5 wireless transmitter, select WT-5 (wireless LAN).
• When using a D4S or D4 with the UT-1, select WT-4 for Network > Choose hardware in the camera SETUP MENU.

Download: Wireless Transmitter Utility 1.6.1