Nikon ViewNX-i, Capture NX-D & Wireless Transmitter Utility Updated with D5 Support

From Nikon:
 
ViewNX-i 1.2.0
 
Changes from Version 1.1.0 to 1.2.0
 
  • Added support for the D5.
  • Added an Auto0 white balance option (available with the D5 only).
  • Image adjustment sliders in Adjustments now always show scales and default values.
  • Added an NEF (RAW) Processing menu to Options.
  • The following items are available in the NEF (RAW) Processing menu in Options:
    • Color Space for Color Reproduction
    • Sizes Medium/Small for NEF (RAW) Images
    • Color Reproduction Process
Download: ViewNX-i 1.2.0
 


Capture NX-D 1.4.0
 
Changes from Version 1.3.0 to 1.4.0
 
  • Added support for the D5.
  • Added an Auto 0 white balance option (available with the D5 only).
  • Added an Auto Retouch Brush Tool to the toolbar.
  • The effects of noise reduction are now visible at all zoom ratios.
  • Added an Include areas where there is no image data option to the Camera and Lens Corrections > Fisheye tool in the edit list.
  • The default image quality for files converted to JPEG using Convert Files has been changed from 60 to 85.
  • Added the following preferences:
    • Sizes Medium/Small for NEF (RAW) Images
    • D1X RAW Default
    • Color Space for Color Reproduction
  • Fixed the following issues:
    • The Open with button and menu option were not available with images created in Capture NX 2.
    • Floppy disk drives (FDD) would sometimes be accessed during batch processing.
    • The application would sometimes quit unexpectedly if a folder containing images created with non-Nikon cameras was selected.
    • The clarity value for Custom Picture Controls would sometimes not be reflected.
    • NEF (RAW) photos shot with Df or D4 cameras at low ISO sensitivities (Lo 0.3-Lo 1) would brighten if saved using the Convert File option after white balance was adjusted using the gray point sample tool.
    • Some security software would interfere with batch processing.
  • The 64-bit edition of Camera Control Pro 2 can now be accessed using the Open with Camera Control Pro 2 option in the File menu.
Download: Capture NX-D 1.4.0
 


Wireless Transmitter Utility 1.6.1
 
Changes from Versions 1.5.5 to 1.6.1
 
  • The D5 and D500 are now supported.
  • The WT-7 and WT-6 wireless transmitters are now supported.
  • Turkish is now supported.
  • Windows 10 is now supported.
Cautions for Users of the UT-1
 
  • When a UT-1 is connected to a D4 or D7000 camera, the software will in addition to the Transfer mode and PC mode options display Thumbnail select mode and Print mode options, but latter-named two options cannot be used.
  • When using the Wireless Transmitter Utility to configure connection settings for a D4S, D4, or D7000, be sure to select WT-4/UT-1 (functions as WT-4) when prompted to select hardware.
  • When using the Wireless Transmitter Utility to configure connection settings for a D7100 or D800/D800E (firmware versions A 1.10/B 1.10), be sure to select Wired LAN when prompted to select hardware. If you are using a UT-1 with a WT-5 wireless transmitter, select WT-5 (wireless LAN).
  • When using a D4S or D4 with the UT-1, select WT-4 for Network > Choose hardware in the camera SETUP MENU.
Download: Wireless Transmitter Utility 1.6.1
Posted: 3/23/2016 6:23:46 AM CT   Posted By: Sean
Posted to: Nikon News    Category: Nikon Software Updates
Share on Facebook! Share on Twitter! Share on Pinterest! Email this page to a friend!
comments powered by Disqus
Help  |  TOU  |  © 2021 Rectangular Media, LLC  |  Bryan CarnathanPowered by Christ!