Canon Firmware Updates (Page 10)

From Canon:

Canon EOS 7D Mark II Firmware v.1.1.0

Firmware Version 1.1.0 incorporates the following functional enhancements and improvements:

1. Supports Wi-Fi adapter W-E1.
2. Adds a setting to enable or disable automatic storage of the lens if it is extended out when a gear-driven STM lens* is attached, and the power switch is turned to [OFF].

Download: Canon EOS 7D Mark II Firmware v.1.1.0

B&H carries the Canon EOS 7D Mark II and W-E1 Wi-Fi Adapter.

From the Canon Digital Learning Center:

Based on feedback from large photo organizations, news photojournalists, and so on, Canon has delivered a significant firmware upgrade for the EOS-1D X Mark II camera. Firmware upgrade version 1.1 clearly targets professional users and organizations, but as you’ll see, some of these features may be useful to individual working pros or even serious photography enthusiasts. We’ll examine what’s new in this firmware upgrade in this article.

In a nutshell: what’s new and different?

This new upgrade (version 1.1) addresses specific issues that professional news and photojournalism organizations have brought to Canon’s attention — we understand that not all of these will be important in more ordinary, everyday use to individual photographers. That said, the changes and new features that this firmware adds to the EOS-1D X Mark II camera are the ability to:

• Install up to 39 items of IPTC information into the camera, and to add data (or deliberately not apply it) to images you take
• Add set-up information for up to 40 new Wi-Fi networks to a memory card, and load that data as a full set of possible Wi-Fi networks to select from for connection
• Transfer only “protected” images via Wi-Fi
• Retain GPS position data: Continue to apply last known GPS location information to images subsequently taken, even if GPS connection is lost (photographer went inside a building, etc.)
• Change LCD color tone (four pre-defined settings), to either approximate display from other cameras you’re working with, or to shift color tone based on ambient lighting as the LCD monitor is being used

Keep in mind that the EOS-1D X Mark II differs from other Canon EOS models in that it not only permits network communication and transfer of images via Wi-Fi (using the optional WFT-E8A or WFT-E6A wireless file transmitters), but also via wired ethernet connection — there’s a dedicated ethernet port on the camera for this purpose. This allows similar network connectivity, but without some of the variables users can encounter on-location with Wi-Fi transmission. Firmware v. 1.1 doesn’t change this; we only want to remind users of it here.

Note: The firmware is not yet availble for download on Canon USA's website.

B&H carries the Canon EOS-1D X Mark II.

From Canon:

Firmware Version 1.0.4.1.00 incorporates the following update:

1. Adds Canon Log 3.
2. Reduces Canon Log 2 noise in dark areas.
3. Enables magnification to be used even during recording.
4. The following features are enabled when these lenses are attached: CN7x17 KAS S/E1*3, CN-E18-80mm T4.4 L IS KAS S or CN20x50 IAS H/E1:
• Enables autofocus using the Dual Pixel CMOS AF function. (Not applicable to the CN20x50 IAS H/E1 lens)
• Enables the joystick on the camera's grip unit to be set to operate the zoom.
• Enables control of iris to be set to manual operation, and control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
• Enables automatic aperture and push auto iris functions.
• Enables retrieval of metadata, such as the model name and the focal distance of the lens attached, and display of metadata on the camera.
5. Enables Dual Pixel Function when these lenses are attached: CN7x17 KAS S/E1 lens, CN-E18-80mm T4.4 L IS KAS S lens or any of the EF cinema prime lenses.
6. Adds peripheral illumination/chromatic aberration correction for the following lenses:
• COMPACT-SERVO lenses: CN-E18-80mm T4.4 L IS KAS S
• CINE-SERVO lenses: CN20x50 IAS H/E1
• EF lenses: EF 35mm f/1.4L II USM, EF 50mm f/1.8 STM and EF-S 18-135mm f/3.5-5.6 IS USM.
7. Enhances menu operations so that settings related to resolution/color sampling, etc. are retained to the extent possible when changing recording settings such as the frame rate.
8. Supports ACESproxy (ACES 1.0).
9. Alleviates the black-dot phenomenon that appears in the periphery of high-brightness light sources.

• You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 64MB or more for the firmware update.
• Firmware version 1.0.4.1.00 is for updating Cinema EOS C300 Mark II cameras running firmware version 1.0.0.1.00 - 1.0.3.1.00. If your camera's firmware is already version 1.0.4.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
• For further information, please refer to the latest version of the unit's Instruction Manual that is released with the firmware update.

Download: Canon EOS C300 II Firmware v.1.0.4.1.00

B&H carries the Canon EOS C300 Mark II Cinema Camera.

From Canon USA:

imagePROGRAF PRO-1000 series Firmware Ver.1.1

• The maximum printable height of custom paper size will be lengthened to 25.5-inch (647.70mm) with specifying in the printer driver.

imagePROGRAF PRO-1000 series Printer Driver Ver.1.02

• Concerning printer paper size, the maximum height of [Paper Size] in [Custom Paper Size] is enlarged from [594mm/23.39inch] to [647.70mm/25.5inch].
  When you use the enlarged paper size, use the printer with firmware version 1.110 or later.

Download: imagePROGRAF PRO-1000 series Firmware v1.1 & Printer Driver v.1.02

B&H carries the imagePROGRAF PRO-1000 printer which currently qualifies for a $100.00 mail-in rebate through August 31.

From Canon USA:

Changes:
Firmware Version 1.0.2 incorporates the following functional improvements and fixes.

1. Incorporates countermeasures for a phenomenon in which the bottom part of still images recorded to SanDisk CFast cards become corrupted.
2. Enhances communication reliability between the camera and CFast cards.

The Version 1.0.2 firmware being released at this time is for cameras with Firmware Version 1.0.0. If the camera's firmware is already Version 1.0.2, it is not necessary to update the firmware. When updating the firmware of your camera, please first go over the instructions thoroughly before you download the firmware. The firmware update takes approximately six minutes.

Download: Canon EOS-1D X Mark II Firmware v.1.02

From Canon USA:

Products

Connection Station CS100

Details

Firmware Version 1.2.0 incorporates the following fixes:

1. Enables the uploading of images to CS100 via an iOS device running iOS9.
2. Fixes a phenomenon in which the CS100 and camera cannot be connected via NFC due to router settings.
3. Fixes a phenomenon in which images cannot be uploaded to CS100 via an iOS device running iOS9.

This firmware is for Connect Station CS100 with Firmware Version 1.1.2. In order to update the firmware, the CS100 device must be connected to the Internet. Please see detailed instructions below.

For the full update procedure, see the Canon USA's CS100 Firmware Version 1.1.2 upgrade post.

Technically speaking, a new firmware for the Canon EF-S 55-250 IS STM appeard on Canon USA's website back in July (but we missed it). However, the firmware udpate may be more relevant than ever for the large number of people who likely took advantage of the crazy Black Friday refurb. deal on the lens (I'm included in that group). Then again, this updated firmware update seems to only improve AF performance when the lens is used with the EOS M3 via adapter.[Sean]

From Canon USA:

Canon EF-S 55-250mm f/4-5.6 IS STM Firmware v.1.0.3

Firmware Version 1.0.3 incorporates the following enhancement.

• Improves the autofocus speed when the EF-S 55-250mm f/4-5.6 IS STM is attached to the EOS M3..

*To mount the EF-S 55-250mm f/4-5.6 IS STM to the EOS M3, the mount adapter EF-EOS M is required.
*The enhancement in the autofocus speed only applies when the lens is used with the EOS M3.

Firmware Version 1.0.3 is for lenses with firmware Version 1.0.2. If the lens firmware is already Version 1.0.3, it is not necessary to update the firmware.

Identification procedure
If the 3rd digit in the serial number of your lens is either 0, 1, or 2, then it is equipped with firmware Version 1.0.2 e.g.

xx0xxxxxxx, xx1xxxxxxx, xx2xxxxxxx

Lenses with serial numbers other than those listed above are equipped with firmware Version 1.0.3 or later.

Cautions:

• To update the firmware of the EF-S 55-250mm f/4-5.6 IS STM, the EOS M3 and the mount adapter EF-EOS M are required.
• If an extension tube is attached, the firmware update may not be carried out successfully, so please make sure to detach the extension tube before performing the firmware update.
• For this firmware update to be effective, you need to update the firmware of the EOS M3 to the latest version (Version 1.0.1 or later).

Note: Canon doesn't mention it, but the lens firmware can also be upgraded via select DSLR bodies like the EOS 7D Mark II.

Download the EF-S 55-250mm IS STM Firmware v.1.0.3

From Canon:

Notice Regarding the Phenomenon of Skipped Frames in Footage Recorded in Slow Motion on the EOS C300 Mark II Digital Cinema Camera

Thank you for using Canon products.

We have become aware that there may be cases of skipped frames in footage recorded in slow motion on the EOS C300 Mark II Digital Cinema Camera. Customer support for this phenomenon is described below.

We would like to offer our sincere apologies to users for the inconvenience caused by this phenomenon. Going forward, we will spare no effort in our quality management to make sure our customers can use our products with confidence.

Phenomenon
Except as provided below, footage recorded in slow motion in Slow & Fast Motion Recording Mode, in 4K and 2K/HD, and at all frame rates, may have skipped frames.

This phenomenon does not occur for slow motion recording at the following settings:

• 2K/HD recording at 59.94P & 50.00P frame rates

Affected Product
EOS C300 Mark II Digital Cinema Cameras with firmware version 1.0.0.1.00 are affected. The camera’s firmware version can be checked from [System Setup] on the menu.

Press the MENU button, then select [System Setup] --> [Firmware] --> [Camera].

Support
Canon has released new firmware that incorporates countermeasures for this phenomenon. Please download and install the firmware update.

Download Firmware Version 1.0.1.1.00 for the EOS C300 Mark II

B&H carries the Canon EOS C300 Mark II Cinema Camera.

From Canon:

EOS C100 Cinema EOS Camera with Dual Pixel CMOS AF Feature Upgrade applied

Details
Firmware Version 2.0.5.1.00 incorporates the following improvements:

• Enables peripheral illumination correction for the following lenses:
• EF 16-35mm f/4L IS USM=
• EF-S 10-18mm f/4-5.6 IS STM
• EF 400mm f/4L DO IS USM
• EF 11-24mm f/4L USM
• EF 24-105mm f/3.5-5.6 IS STM
• EF100-400mm f/4.5-5.6LII IS USM
• EF-S 24mm f/2.8 STM
• CN7×17 KAS S/E1
• When one of the following EF lenses is attached and power is turned off, the lens automatically retracts to its minimum length:
• EF 40mm f/2.8 STM
• EF-S 24mm f/2.8 STM
• EF 50mm f/1.8 STM

Notes
Firmware Version 2.0.5.1.00 is only for EOS C100 cameras with the Dual Pixel CMOS AF Feature Upgrade. If the EOS C100 camera does not have DAF Feature Upgrade applied, please download Firmware Version 2.0.5.1.00.

Firmware Version 2.0.5.1.00 is for updating Cinema EOS C100 cameras running firmware version 2.0.0.1.00 to 2.0.4.1.00. If your camera’s firmware is already version 2.0.5.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.

For further information, please refer to the latest version of the unit’s Instruction Manual that is released with the firmware update

Support
Download Firmware Version 2.0.5.1.00 for the EOS C100

DetailsFirmware Version 1.0.5.1.00 incorporates the following improvements:

• Enables peripheral illumination correction for the following lenses:
• EF 16-35mm f/4L IS USM=
• EF-S 10-18mm f/4-5.6 IS STM
• EF 400mm f/4L DO IS USM
• EF 11-24mm f/4L USM
• EF 24-105mm f/3.5-5.6 IS STM
• EF100-400mm f/4.5-5.6LII IS USM
• EF-S 24mm f/2.8 STM
• CN7×17 KAS S/E1
• When one of the following EF lenses is attached and power is turned off, the lens automatically retracts to its minimum length:
• EF 40mm f/2.8 STM
• EF-S 24mm f/2.8 STM
• EF 50mm f/1.8 STM

Notes
Firmware Version 1.0.5.1.00 is only for EOS C100 cameras without the Dual Pixel CMOS AF Feature Upgrade. If the EOS C100 camera has had the DAF Feature Upgrade applied, please download Firmware Version 2.0.5.1.00.

Firmware Version 1.0.5.1.00 is for updating Cinema EOS C100 cameras running firmware version 1.0.0.1.00 to 1.0.4.1.00. If your camera’s firmware is already version 1.0.5.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.

For further information, please refer to the latest version of the unit’s Instruction Manual that is released with the firmware update.

Support
Download Firmware Version 1.0.5.1.00 for the EOS C100

Details
Firmware Version 1.0.1.1.00 incorporates the following improvements:

• Enables peripheral illumination correction for the following lenses:
• EF 16-35mm f/4L IS USM=
• EF-S 10-18mm f/4-5.6 IS STM
• EF 400mm f/4L DO IS USM
• EF 11-24mm f/4L USM
• EF 24-105mm f/3.5-5.6 IS STM
• EF100-400mm f/4.5-5.6LII IS USM
• EF-S 24mm f/2.8 STM
• CN7×17 KAS S/E1

Notes
Firmware Version 1.0.1.1.00 is for updating Cinema EOS C100 cameras running firmware version 1.0.0.1.00. If your camera’s firmware is already version 1.0.1.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.

For further information, please refer to the latest version of the unit’s Instruction Manual that is released with the firmware update.

Support
Download Firmware Version 1.0.1.1.00 for the EOS C100 Mark II

Details
Firmware Version 1.1.4.1.00 incorporates the following improvements:

Common to EOS C300/EOS C300 PL

• Enables the user to change fan operating mode between On and Automatic. When set to Automatic, the fan turns off during shooting at normal temperature. When the camera temperature rises, the fan starts automatically and lowers the temperature.

EOS C300 only

• Enables control of CINE-SERVO lenses using the RC-V100 remote controller.
• Enables peripheral illumination correction for the following lenses:
• EF 16-35mm f/4L IS USM=
• EF-S 10-18mm f/4-5.6 IS STM
• EF 400mm f/4L DO IS USM
• EF 11-24mm f/4L USM
• EF 24-105mm f/3.5-5.6 IS STM
• EF100-400mm f/4.5-5.6LII IS USM
• EF-S 24mm f/2.8 STM
• CN7×17 KAS S/E1
• When one of the following EF lenses is attached and power is turned off, the lens automatically retracts to its minimum length:
• EF 40mm f/2.8 STM
• EF-S 24mm f/2.8 STM
• EF 50mm f/1.8 STM

Notes
Firmware Version 1.1.4.1.00 is only for EOS C300 cameras without the Dual Pixel CMOS AF Feature Upgrade. If the EOS C300 camera has had the Dual Pixel CMOS AF Feature Upgrade applied, please download Firmware Version 2.1.4.1.00.

Firmware Version 1.1.4.1.00 is for Cinema EOS C300 or EOS C300 PL cameras with Firmware Version 1.1.3.1.00 or earlier. If your camera’s firmware is already version 1.1.4.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.

For further details, please refer to the latest version of the instruction manual for this product, which will be released at the same time as this firmware update.

Support
Download Firmware Version 1.1.4.1.00 for the EOS C300
Download Firmware Version 1.1.4.1.00 for the EOS C300 PL

Details
Firmware Version 2.1.4.1.00 incorporates the following improvements:

• Enables control of CINE-SERVO lenses using the RC-V100 remote controller.
• Enables peripheral illumination correction for the following lenses:
• EF 16-35mm f/4L IS USM=
• EF-S 10-18mm f/4-5.6 IS STM
• EF 400mm f/4L DO IS USM
• EF 11-24mm f/4L USM
• EF 24-105mm f/3.5-5.6 IS STM
• EF100-400mm f/4.5-5.6LII IS USM
• EF-S 24mm f/2.8 STM
• CN7×17 KAS S/E1
• When one of the following EF lenses is attached and power is turned off, the lens automatically retracts to its minimum length:
• EF 40mm f/2.8 STM
• EF-S 24mm f/2.8 STM
• EF 50mm f/1.8 STM
• Enables the user to change fan operating mode between On and Automatic. When set to Automatic, the fan turns off during shooting at normal temperature. When the camera temperature rises, the fan starts automatically and lowers the temperature.

Notes
Firmware Version 2.1.4.1.00 is only for EOS C300 cameras with the Dual Pixel CMOS AF Feature Upgrade applied. If the EOS C300 camera does not have Dual Pixel CMOS AF Feature Upgrade applied, please download Firmware Version 1.1.4.1.00.

Firmware Version 2.1.4.1.00 is for Cinema EOS C300 cameras with Firmware Version 2.1.2.1.00 - 2.1.3.1.00. If your camera’s firmware is already version 2.1.4.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.

For further details, please refer to the latest version of the instruction manual for this product, which will be released at the same time as this firmware update.

Support
Download Firmware Version 2.1.4.1.00 for the EOS C300 with Dual Pixel CMOS AF Feature Upgrade applied

Details
Firmware Version 1.0.7.1.00 incorporates the following additions and improvements:

• Enables control of CINE-SERVO lenses using the RC-V100 remote controller.
• Enables peripheral illumination correction for the following lenses:
• EF 16-35mm f/4L IS USM=
• EF-S 10-18mm f/4-5.6 IS STM
• EF 400mm f/4L DO IS USM
• EF 11-24mm f/4L USM
• EF 24-105mm f/3.5-5.6 IS STM
• EF100-400mm f/4.5-5.6LII IS USM
• EF-S 24mm f/2.8 STM
• CN7×17 KAS S/E1
• When one of the following EF lenses is attached and power is turned off, the lens automatically retracts to its minimum length:
• EF 40mm f/2.8 STM
• EF-S 24mm f/2.8 STM
• EF 50mm f/1.8 STM

Notes
Firmware Version 1.0.7.1.00 is for updating Cinema EOS C500 cameras with firmware of a version from 1.0.6.1.00 or earlier. If your camera’s firmware is already version 1.0.7.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version. For details, please refer to the instruction manual (the updated version).

Support
Download Firmware Version 1.0.7.1.00 for the EOS C500

Details
Firmware Version 1.0.1.0 incorporates the following additions and improvements:

• Adds Rolling Shutter Distortion Reduction function in Camera Setup Menu to enable image recording with reduced rolling shutter distortion when shooting 4K movies

Caution

• You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 64MB or more for the firmware update.

Notes
Firmware Version 1.0.1.0 is for XC10 camcorders with Firmware Version 1.0.0.0. If your camcorder’s firmware is already Version 1.0.1.0, it is not necessary to update the firmware. Once the camcorder is updated to the latest version, it cannot be restored to a previous version.

For further information, please refer to the latest version of the unit’s Instruction Manual that is released with the firmware update.

Support
Download Firmware Version 1.0.1.0 for the XC10

B&H carries the Canon EOS C100, C300, C500 and XC10 video cameras.

Canon has released firmware update version 1.0.1 for the Canon EOS Rebel T5 / 1200D.

Firmware Version 1.0.1 incorporates the following fix:

• Fixes a phenomenon in which the captured image may exhibit uneven exposure when the camera is used with a TS-E 17mm f/4L or TS-E 24mm f/3.5L II lens which is shifted or tilted during shooting.

Download Firmware Version 1.0.1 for the Rebel T5.

From Canon:

Details:
Firmware Version 1.4.0 incorporates the following improvements and fixes:

• Fixes a phenomenon which occurs when the “Shutter button half-press” menu item, configured in “C.Fn5: Operation”>”Custom Controls Menu”, is set to metering start only; depending on when the shutter button is half-pressed, it may initiate AutoFocus.
• Firmware Version 1.4.0 includes all improvements and fixes provided in previous firmware versions.

Notes:
As a result of this fix, cameras with Firmware Version 1.3.9 (or later) will not be able to read the “camera settings file” created with cameras running Firmware Version 1.3.5 (or earlier). If you require the “camera settings file”, please create it after updating to firmware version 1.3.9 (or later).

Support:
Canon USA will perform this firmware update on the EOS-1D C Cinema EOS Camera free of charge. Shipping and handling charges may apply. Please contact the Canon Customer Support Center for details.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Please register the EOS-1D C. By registering, we will be able to notify you via email when future firmware updates become available for download. If you already registered, please ensure you are opted-in to receive the notification.

B&H carries the Canon EOS-1D C Cinema Camera.

Firmware Version 2.0.8 incorporates the following functional improvements and fixes:

• Fixes a phenomenon which occurs when the “Shutter button half-press” menu item, configured in “C.Fn5: Operation”>”Custom Controls Menu”, is set to metering start only; depending on when the shutter button is half-pressed, it may initiate AutoFocus.

Firmware Version 2.0.8 is for cameras with Firmware Version 2.0.7 or earlier. If your camera's firmware is already Version 2.0.8, it is not necessary to update the firmware. The firmware update takes approximately seven minutes.

Notes:

• Once the EOS-1D X camera is updated to Version 2.0.7, it cannot be restored to a previous firmware version (Versions 1.0.2 through 2.0.3).
• Once the EOS-1D X camera is updated to firmware Version 2.0.7 from previous firmware version (Versions 1.0.2 through 1.2.4 and 2.0.3), it is recommended that the latest application software*1 be used. Certain previous versions of this application software do not support functions which are added by the new firmware. You can download the latest application software from our Web site.
• The instruction manual has been revised to accommodate the improvements and fixes provided as of firmware Version 2.0.3 or later.
• Please download the most recent firmware and instruction manual from our website.
• As a result of this fix, cameras with Firmware Version 2.0.7 (or later) will not be able to read the “camera settings file” created with cameras running Firmware Version 2.0.3 (or earlier). If you require the “camera settings file”, please create it after updating to firmware version 2.0.7 (or later).

*1: EOS Utility version 2.14.10a or later (Supported OSes: Windows 8/ 7 / 7 SP1/ VistaSP2 / XP SP3, Mac OS X v10.9 / 10.8 / 10.7 / 10.6)
*1: Digital Photo Professional version 3.14.46 or later (Supported OSes: Windows 8/ 7 / 7 SP1 / Vista SP2 / XP SP3, Mac OS X v10.6 / 10.7/ 10.8/ 10.9)

Support

Download Firmware Version 2.0.8 for the EOS-1D X.

If you have not already done so, please register your Canon EOS-1D X. By registering, we will be able to notify you via email when service updates are available.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

From Canon:

Thank you for using Canon products.

Details
Firmware Version 1.0.5 incorporates the following fixes:

• Improves AF accuracy when used in combination with the EF 16-35mm f/2.8L USM lens or EF-S 17-55mm f/2.8 IS USM lens.
• Fixes a phenomenon in which, in very rare cases, the “Peripheral illumination correction” is applied inconsistently.
• Fixes a phenomenon in which, while performing an EF lens firmware update, the progress bar displayed on the LCD monitor may freeze at 100% even though the update has been completed.
• Fixes a processing error in relation to the leap second for the “Geotag information appended to image” and “Log data” GPS functions.
• Fixes a phenomenon, where at the time of shooting in very rare cases “Err 70” occurs, or the shutter does not release.

Firmware Version 1.0.5 is for cameras with firmware up to Version 1.0.4 If the camera's firmware is already Version 1.0.5, it is not necessary to update the firmware.

Support
Download Firmware Version 1.0.5 for the EOS 7D Mark II.

If you have not already done so, please register your Canon EOS 7D Mark II. By registering, we will be able to notify you via email about future announcements.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Update: As of this morning, firmware version 1.0.5 isn't yet available on Canon USA's website. However, it can be found on Canon UK's 7D II Product Page.

From Canon:

Canon WFT-E7 Wireless File Transmitter

Firmware Version 1.2.0 incorporates the following improvement:

• Support has been added for the EOS 5Ds / EOS 5Ds R.

Please note that an interface cable is required in order to update the WFT-E7 to Firmware Version 1.2.0.

Connection Requirements:
In order to connect the Canon WFT-E7 with the Canon EOS 5Ds / EOS 5Ds R the following items are needed:

Firmware Version 2.0.0 incorporates the following fixes and improvements:

• Fixes a phenomenon, in which, in rare cases, the signal acquisition indicator on the GPS Receiver GP-E2 display “Slow blinking (Signal acquired)” even if a signal is not yet acquired.
• Fixes a phenomenon in which new log files may not be saved correctly if the built-in memory of the GPS Receiver GP-E2 becomes full.
• Support for the EOS Rebel T6s/EOS 760D and EOS Rebel T6i/750D cameras has been added.
• Support for the EOS 5DS and EOS 5DS R cameras has been added.

To update the firmware of this product, Canon’s Map Utility software that is bundled with GPS Receiver GP-E2 is required. Furthermore, before updating the firmware, use Map Utility to save any GPS log files in the GP-E2’s built-in memory to your computer. After the GPS log files are saved to your computer, make sure to delete the log files from the built-in memory of the GPS Receiver GP-E2 before updating the firmware.

Download: Firmware Version 2.0.0 for the GPS Receiver GP-E2

B&H carries the Canon WFT-E7 Wireless File Transmitter and GPS Receiver GP-E2.

Canon USA has posted a firmware update for the Canon EOS 7D Mark II:

Details

Firmware Version 1.0.4 incorporates the following fixes:

• Fixes a phenomenon in which the camera’s AF function may not operate properly at a focal length of approximately 100mm when used with the EF 70-200mm f/2.8L IS II USM lens.
• Fixes a phenomenon in which, in rare instances, the reduction of the flicker effect cannot be achieved when in AI servo AF mode, despite the “Anti-flicker shoot” function being set to “Enable”.
• Fixes a phenomenon in which the Picture Style settings may not be applied to the captured image when the camera is set to custom shooting mode C1, C2 or C3.
• Fixes a phenomenon in which, in very rare cases, the first still image captured in live view mode may not record the correct date and time.
• Fixes a phenomenon in which, in very rare cases, image noise may appear in JPEG images when brightness or contrast is corrected by the Auto Lighting Optimizer function.

Firmware Version 1.0.4 is for cameras with Firmware Version 1.0.2 or earlier. If the camera's firmware is already Version 1.0.4, it is not necessary to update the firmware.

Download

Firmware version 1.0.4 can be downloaded here.

From Canon USA:

Canon EOS Rebel T5i Firmware v. 1.1.4

Firmware Version 1.1.4 incorporates the following fixes and improvements:

1. Fixes a phenomenon in which focus may not be adjusted with specific lenses when shooting remotely with EOS Utility software.
2. Fixes a phenomenon in which “LCD brightness” may not be adjusted after pressing the SET button if “Menu Display” is assigned to the SET button in the Custom Functions setting (C.Fn-7).
3. Enhances the reliability of the built-in flash exposure.

Firmware Version 2.0.0 incorporates the following fixes and improvements:

1. Fixes a phenomenon, in which the signal acquisition indicator on the GPS Receiver GP-E2 display “Slow blinking (Signal acquired)” even if a signal is not yet acquired.
2. Fixes a phenomenon, where new log files may not be saved correctly if the built-in memory of the GPS Receiver GP-E2 becomes full.
3. Support for the EOS Rebel T6s/EOS 760D and EOS Rebel T6i/750D cameras has been added.

When updating the firmware of the GPS Receiver GP-E2, please review the instructions thoroughly before you download the firmware.

Please note:
To update the firmware of this product, Canon’s Map Utility software that is bundled with GPS Receiver GP-E2 is required. Furthermore, before updating the firmware, use Map Utility to save any GPS log files in the GP-E2’s built-in memory to your computer. After the GPS log files are saved to your computer, make sure to delete the log files from the built-in memory of the GPS Receiver GP-E2 before updating the firmware.

Download:
GPS Receiver GP-E2 Firmware v. 2.0.0

Canon as released an updated firmware for its EOS 1D C Cinema camera. The new firmware version 1.3.9 incorporates the same improvements and fixes as the recent 1D X firmware update, except the firmware is not downloadable.

In order to upgrade the EOS 1D C firmware, you must send the camera to a regional service center.

From Canon:

Support
Canon USA will perform this firmware update on the EOS-1D C Cinema EOS Camera free of charge. Shipping and handling charges may apply. Please contact the Canon Customer Service and Support Center for details.

From Canon:

Thank you for using Canon products.

Details

Firmware Version 2.0.7 incorporates the following functional improvements and fixes:

1. Improves the AF controllability when shooting in Live View mode with a wide-angle lens (fixed focal length or zoom).
2. Fixes a phenomenon in which, when shooting long exposures (several minutes), vertical lines appear on the right edge of captured images (still photos).
3. Fixes a phenomenon in which the Auto Exposure Bracketing (AEB) may not perform as intended when in continuous shooting mode and where the shutter speed is longer than 1 second.
4. Improves the reliability of the control mechanism for the Picture Style Auto setting.
5. Fixes a phenomenon in which the electronic level indicator does not work correctly.
6. Fixes a phenomenon in which, when using the “Save and read camera settings” function, the color space data that is selected in “Custom shooting mode (C1-C3)” is not saved. *1
7. Corrects some incorrect indications on the “English” and “Russian” menu screens.

Firmware Version 2.0.7 is for cameras with Firmware Version 2.0.3 or earlier. If your camera's firmware is already Version 2.0.7, it is not necessary to update the firmware.
The firmware update takes approximately seven minutes.

Notes:
Once the EOS-1D X camera is updated to Version 2.0.7, it cannot be restored to a previous firmware version (Versions 1.0.2 through 2.0.3).

Once the EOS-1D X camera is updated to firmware Version 2.0.7 from previous firmware version (Versions 1.0.2 through 1.2.4 and 2.0.3), it is recommended that the latest application software *1 be used. Certain previous versions of this application software do not support functions which are added by the new firmware.
You can download the latest application software from our Web site.
*1: EOS Utility version 2.14.10a or later (Supported OSes: Windows 8/ 7 / 7 SP1 / VistaSP2 / XP SP3, Mac OS X v10.9 / 10.8 / 10.7 / 10.6)
*1: Digital Photo Professional version 3.14.46 or later (Supported OSes: Windows 8 / 7 / 7 SP1 / Vista SP2 / XP SP3, Mac OS X v10.6 / 10.7/ 10.8/ 10.9)

The instruction manual has been revised to accommodate the improvements and fixes provided as of firmware Version 2.0.3 or later.

Support

Download Firmware Version 2.0.7 for the EOS 1DX.

Download the latest instruction manual from our Website.

Download the latest application software from our Website.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Canon EOS-1D X Review | Buy at B&H

From Canon:

Thank you for using Canon products.

Details

Firmware Version 1.3.3 incorporates the following improvement and fix:

1. Improves the AF controllability when shooting in Live View mode with a wide-angle lens (fixed focal length or zoom).
2. Corrects some incorrect indications on the “English” and “Russian” menu screens.

When updating the firmware of your camera, please first review the instructions thoroughly before downloading.

Note:
Once the EOS 5D Mark III camera is updated to Version 1.3.3, it cannot be restored to a previous firmware version (Versions 1.0.7 through 1.2.3).

Support

Download Firmware Version 1.3.3 for the EOS 5D Mark III Camera

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Canon EOS 5D Mark III Review | Buy at B&H

From Canon:

Affected Product
EOS 6D Digital SLR Cameras

Details
Firmware Version 1.1.6 incorporates the following fixes:

1. Fixes a phenomenon in which the camera may not first use the center AF point to focus, when the AF point selection is set to automatic in AI Servo AF mode.
2. Fixes a phenomenon in which focus cannot be finely adjusted with specific lenses when shooting remotely with EOS Utility software.
3. Corrects some Ukrainian language displayed on the menu for ISO Setting.

Please note: After the firmware update has been performed the following setting will be reset to default.
Menu > Custom Function> C.Fn II: Autofocus > AF Microadjustment> 1: All by same amount

When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.

Support
Download Firmware Version 1.1.6 for the EOS 6D Camera

Thank you,
Customer Support Operations
Canon U.S.A., Inc