• Home >
  • News
  •  > Nikon D3100 Firmware v1.01

Nikon D3100 Firmware v1.01

Nikon has posted D3100 Firmware v1.01 (Europe: Macintosh / Windows).
 
Modifications enabled with this firmware upgrade, release date January 25, 2011:
 
• A magenta tint was present at the bottom of still images captured at high sensitivities after shooting in live view mode or recording movies for an extended length of time. The occurrence of this magenta tint has been reduced.
 
• When images captured with continuous shooting in live view mode were played back, in some very rare cases, some of the images were not properly displayed. This issue has been resolved.
 
• When shooting in live view mode with AF-area mode set to Subject-tracking AF, in some very rare cases, the focus point slipped off the subject with autofocusing after the intended tracking subject had been selected. This issue has been resolved.
 
• When images edited using camera retouch functions were played back in calendar playback mode, they were assigned to dates based not on the date of capture, but rather the date on which they were edited. This issue has been resolved.
 
• When white balance for RAW images created using the camera’s image overlay function was fine tuned with Capture NX 2 or ViewNX 2, the images acquired a magenta cast. This issue has been resolved.
 
• A portion of the error message displayed when live view mode could not be initiated because the camera’s internal temperature was too high has been revised.
 
• When Noise reduction in the shooting menu is set to On, operation is as follows.
 
Processing to reduce noise is performed at all ISO sensitivity settings. Noise reduction is especially effective with shooting at high ISO sensitivities.
 
Processing to reduce noise is performed immediately after shooting in any of the situations noted below. While processing to reduce noise is performed, "Job nr" blinks in the viewfinder display. Shooting is not possible until "Job nr" is no longer displayed. The time required for noise reduction processing is roughly equal to the shutter speed used to capture the image.
 
• Shooting at shutter speeds slower than approximately 8 seconds
 
• Shooting at high ISO sensitivities when the internal temperature of the camera is high
 
• The Help information displayed for the Noise reduction item in the shooting menu has also been revised in accordance with these modifications.
Posted: 1/25/2011 9:58:08 AM CT   Posted By: Bryan
Posted to: Nikon News
comments powered by Disqus

Please support this site and my family by using the links provided throughout the site to make your purchases
Using this link to make your B&H purchase supports this site and my family
Using this link to make your purchase supports this site and my family
Using this link to make your purchase supports this site and my family
Using this link to place your Beach Camera order supports this site.
Using this link to place your Think Tank Photo order supports this site. Should your order total more than $50.00, Think Tank Photo will send you a free gift with your order if this link is used
Using this link to place your MindShift Gear order supports this site.
Canon Refurbished:
(Like new gear at nicely reduced prices)
B&H Photo
Adorama
Canon Store: DSLRs | Lenses | Flashes
 
Fund New Gear by Selling the Used:
Sell Used Gear at B&H Photo (learn more)
Sell Used Gear at Amazon.com
Support this site by ordering a Lensbaby!

Help | Contact Us | Support Us | Terms of Use | © 2003-2014 The Digital Picture, LLC | Bryan CarnathanPowered By Christ!