Nikon Capture NX 2.4.0 Update Available for Download

Nikon has released the Capture NX 2.4.0 software update.

Modifications enabled with Ver. 2.4.0

Modifications that apply to both the Windows and Macintosh versions

  • Support for RAW images captured with the Nikon 1 J3 and Nikon 1 S1 has been added.
  • The following modifications have been made to White Balance in the Camera Settings portion of the Develop section in the Edit List palette.
  • Underwater can now be selected from New WB. However, Underwater can only be selected for RAW images captured with a camera that supports Underwater white balance.
  • Resulting colors have been corrected when Flash was selected from New WB for RAW images captured with the Nikon 1 V2.
  • An issue that, in some rare cases, prevented display of some JPEG images has been resolved.

Additional modifications to the Windows version

  • Compatibility with 64- and 32-bit Windows 8, Windows 8 Pro, and Windows 8 Enterprise has been added.
  • Proper operation has been confirmed with use in desktop mode. Touch screen operations are not supported.

Additional modifications to the Macintosh version

  • Support for high-resolution display on Macintosh computers with a built-in Retina display has been added. However, this applies only to image display in the image window.

Installation
Windows

  1. Create a new folder with an appropriate name on your computer's hard disk.
  2. Download S-CNX2__-020400WU-___EN-ALL___.exe to the folder created in step 1.
  3. Run S-CNX2__-020400WU-___EN-ALL___.exe to launch the software installer.
  4. Follow the on-screen instructions to accurately complete the installation.

Macintosh

  1. Download S-CNX2__-020400MU-___EN-ALL___.dmg.
  2. Once S-CNX2__-020400MU-___EN-ALL___.dmg has finished downloading, a Capture NX 2 Setup disk image will be mounted. A file titled Capture NX 2 Setup will be created inside the disk image.
  3. Double-click Capture NX 2 Setup to launch the software installer.
  4. Follow the on-screen instructions to accurately complete the installation.

Download the Capture NX 2.4.0 software update: Windows | Macintosh

B&H carries Nikon's Capture NX 2 photo editing software.

Posted: 2/5/2013 8:16:46 AM ET   Posted By: Sean
Posted to: Nikon News    Category: Nikon Capture NX
Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Send Comments
Terms of Use, Privacy  |  © 2024 Rectangular Media, LLC  |  Bryan CarnathanPowered by Christ!