Canon Firmware Updates (Page 9)

From Canon USA:

Service Notice: Remote shooting with Camera Connect App with camera running Firmware Version 1.1.1

Thank you for using Canon products.

A communication error has been discovered when using the EOS 7D Mark II running Firmware Version 1.1.1, which version was released on April 27, 2017, in combination with the Wi-Fi Adapter W-E1.

We sincerely apologize for any inconvenience caused to customers, and we ask for your ongoing patience.

Phenomenon

Remote shooting with the Camera Connect App is not possible after connecting the EOS 7D Mark II to a smartphone via the Wi-Fi Adapter W-E1.

Affected Product

EOS 7D Mark II Digital SLR Camera: Units that have been updated from Firmware Version 1.0.5 or earlier to Firmware Version 1.1.1

*This phenomenon will not occur if the camera meets either of the two conditions below:

• If the camera has been updated from Firmware Version 1.1.0 to Firmware Version 1.1.1.
• If the camera was already equipped with Firmware Version 1.1.1 at the time of purchase.

We are currently making preparations to correct this phenomenon with the release of a firmware update in early June. In the meantime, please use the workaround method described below.

Workaround

• Firmware Version 1.1.1 will no longer be available for download, and Firmware Version 1.1.0 will be made available for download again.Users whose camera is affected by this phenomenon are asked to download Firmware Version 1.1.0 and install Firmware Version 1.1.0 onto the camera. Download Firmware Version 1.1.0 from the Canon USA website.
• If you want the improvements and fixes provided in Firmware Version 1.1.1* applied to your camera, please contact the Canon Customer Support Center in your region and make a request for your camera to be re-updated to Firmware Version 1.1.1.
• *Improvements and fixes provided in Firmware Version 1.1.1:
• Enhances reliability of communications when transferring images using Wireless File Transmitter WFT-E7A.
• Corrects the phenomenon of Err70 which occurs with certain combinations of settings.
• Corrects the very rare phenomenon in which the shutter can no longer be released.
• Enhances reliability of operations for specific custom function settings.

Support

If you have not already done so, please register the EOS 7D Mark II. By registering, we will be able to notify you via email about future announcements.

This information is for residents of the United States and its five territories only. If you do not reside in the USA or its five territories, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

From Canon USA:

Thank you for using Canon products.

For EOS C300 Mark II/EOS C300 Mark II PL Digital Cinema Cameras equipped with firmware Version 1.0.6.1.00, we have confirmed a phenomenon in which, depending upon the usage conditions, the camera freezes when a VPG 130 CFast card is used simultaneously with a non VPG130 CFast card.

Firmware Version 1.0.7.1.00 (or later) resolves this phenomenon.

We sincerely apologize for the inconvenience caused to customers, and we ask for your ongoing patience.

Phenomenon

When a VPG130 CFast card is used simultaneously with a non VPG130 CFast card the camera may freeze. If the camera freezes, even if the live view image is displayed, all buttons and switches, including the POWER switch, will no longer respond, and the footage will not be recorded on the cards. (The time code and the recording indicator may continue to work.)

The camera can be released from the freeze condition by detaching it from the power supply (or removing the battery).

Affected Products

EOS C300 Mark II/EOS C300 Mark II PL Digital Cinema Cameras (with Firmware V1.0.6.1.00).

Support

Firmware Version 1.0.7.1.00 (or later) resolves this phenomenon.

From Canon UK:

Firmware Version 1.0.1 incorporates the following fixes:

• Corrects a phenomenon in which, when the playback grid is set to "6x4", and a vertical image is displayed, or a horizontal image is rotated to be displayed vertically, the grid does not display correctly.
• In languages other than Japanese, the phrase "no. of shots" has been corrected to "value" in the "Time-lapse movie settings > Interval/Shots" setting screen.

Firmware Version 1.0.1 is for cameras with firmware up to Version 1.0.0. If the camera's firmware is already Version 1.0.1, it is not necessary to update the firmware.

Download: Canon EOS M5 Firmware v1.0.1

Update: Canon EOS 7D Mark II Firmware v.1.1.1 is no longer unavailable due to a W-E1 communication error bug.

Original Post:

Canon EOS 7D Mark II firmware v.1.1.1 has been released. See details below. (thanks Trent)

From Canon USA:

Firmware Version 1.1.1 incorporates the following improvement and fix:

• Enhances reliability of communications when transferring images using Wireless File Transmitter WFT-E7 (A/B/C/D/E).
• Corrects the phenomenon of Err70 which occurs with certain combinations of settings.
• Corrects the phenomenon in which in very rare cases the shutter can no longer be released.
• Enhances reliability of operations for specific custom function settings.

Download: Canon EOS 7D Mark II Firmware v.1.1.1

B&H carries the Canon EOS 7D Mark II DSLR Camera.

From Canon USA:

New Firmware Delivers Enhanced Digital Cinema Camera Connectivity and Improved Shooting-Assist Functions for HDR Video

MELVILLE, N.Y., April 20, 2017 – Demonstrating Canon’s continued commitment to supporting the digital cinema and television broadcasting industries, Canon U.S.A. Inc., a leader in digital imaging solutions, today announced that its parent company, Canon Inc. and Canon Marketing Japan Inc., will make available free firmware upgrades for three of its professional 4K displays—the DP-V1710, DP-V2410 and DP-V2420 in June 2017.

New features include:

• Enhanced connectivity with Canon digital cinema cameras

The new firmware updates permit 4K RAW video captured using the EOS C700 or the EOS C700 GS PL (scheduled to be released July 2017) to be viewed directly on the display using only a 3G-SDI cable, without the need for an external transitional device. The firmware also makes possible the acquisition of all image data from video captured using the EOS C700, EOS C700 GS PL as well as the EOS C300 Mark II, enabling the display of image setting values from the connected camera and metadata.

Furthermore, these updates enable the display of the cinema aspect ratio 2.39:1 for specialized shooting using a digital cinema camera equipped with an anamorphic lens. The addition of these new features delivers enhanced user convenience when confirming images during shooting

• Improved connectivity with ARRI digital cinema cameras

Thanks to these new firmware updates, users can simply connect an ARRI digital cinema camera to the DP-V1710, DP-V2410 or DP-V2420 4K Professional Display Models and view LOG C video in HDR. It is also no longer necessary to add an LUT to confirm video, for improved ease of use.

• Expanded shooting-assist functions for HDR video

The new updates make possible the display of 4K video in both HDR and SDR (Standard Dynamic Range) simultaneously, using a vertical split-screen mode. What’s more, the updates make possible the downscaling and parallel display of 4K video as two separate images, enabling side-by-side comparisons of HDR and SDR images or HDR images and images with HDR shooting-assist functions applied.

Additionally, colors can now be overlaid on HDR video, with the color depending on the actual luminance of the video area, allowing for the visual confirmation of luminance distribution.

B&H carries the Canon DP-V1710, DP-V2410 and DP-V2420 4K displays.

From Canon:

Firmware Version 1.0.4 incorporates the following fixes and improvements:

• Fixes a phenomenon in which a red-colored area may appear at the bottom-center of a captured image when shooting in bulb mode or during a long exposure.
• Fixes a phenomenon in which the autofocus may not respond when the autofocus is initiated via pressing the shutter button, the AF-ON button or the AE lock button when configured in the custom control menu.
• Enhances the reliability of communications between the camera and SD card.
• Fixes incorrect wording on the Finnish language menu screen.

Download: Canon EOS 5D Mark IV Firmware v.1.0.4

B&H carries the Canon EOS 5D Mark IV.

Canon has released firmware updates for the EOS C700, EOS C100 Mark II, EOS C100 DAF, EOS C100, XC10, XC15, ME20F-SH, and ME200S-SH cameras. See below for details.

Canon EOS C700 Firmware v.1.0.1.1.00

Firmware Version 1.0.1.1.00 incorporates the following fixe and enhancements:

1. Adds the following new recording modes: 4.5K RAW and Apple ProRes in CDX-36150*1
• RAW Format: Media: Capture Drive 2.0 (Resolution / Max. Frame Rate)
• [4.5K] 4512x2376 / 100 fps
• [4.5K Cinescope] 4512x1920 / 120 fps
• [2K Crop] 2048x1080 / 240 fps- ProRes Format*2
• Media: Capture Drive 2.0 (Resolution / Codec / Max. Frame Rate)
• 4096x2160 / ProRes 422 HQ / 60 fps
• 3846x2160 / ProRes 422 HQ / 60 fps
• 2048x1080 / ProRes 422 HQ / 120 fps
• 2048x1080 / ProRes 4444 XQ / 60 fps
• 2048x1080 / ProRes 4444 / 60 fps
• 1920x1080 / ProRes 422 HQ / 120 fps
• 1920x1080 / ProRes 4444 XQ / 60 fps
• 1920x1080 / ProRes 4444 / 60 fps
• 2048x1080 (Crop) / ProRes 422 HQ / 240 fps
• 1920x1080 (Crop) / ProRes 422 HQ / 240 fps
2. Allows CDX-36150 firmware to be updated through the camera menu. *3
3. Fixes communications with the Remote Controller RC-V100.

Download: Canon EOS C700 Firmware v.1.0.1.1.00

Firmware Version 1.0.4.1.00 incorporates the following enhancements:

1. Shutter Angle Priority has been added. A constant shutter angle can now be maintained, regardless of any other camera settings being changed.
2. Support for peripheral illumination correction when the EF 24-105mm f/4L IS II USM lens is attached, has been added.

Firmware Version 1.0.8.1.00 incorporates the following correction.

1. The following features are enabled when these lenses are attached: CN7x17 KAS S/E1*, CN-E18-80mm T4.4 L IS KAS S or CN20x50 IAS H/E1*3.
• Saving and displaying metadata, such as the model name and the focal distance of the lens attached.
• Support for peripheral illumination Correction.
• Manual Iris control via the camera's control dial on the grip.
• Zoom operation via the joystick on the camera's.
• Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
• Automatic aperture and push auto iris functions.
• Operation of REC start/stop via the lens's grip unit.
2. Adds Peripheral Illumination Correction for the following lenses:
• EF 35mm f/1.4L II USM
• EF 50mm f/1.8 STM
• EF-S 18-135mm f/3.5-5.6 IS USM
• EF 24-105mm f/4L IS II USM

Download: Canon EOS C100 Firmware v.1.0.8.1.00 & EOS C100 w/DPAF Upgrade Firmware v.2.0.8.1.00

Firmware Version 1.0.3.0 incorporates the following enhancement.

1. Support for CFast cards (VPG130) has been added.*

Download: Canon XC10 Firmware v.1.0.3.0

Firmware Version 1.0.1.0 incorporates the following enhancement.

1. Support for CFast cards (VPG130) has been added.*

Download: Canon XC15 Firmware v.1.0.1.0

Firmwares incorporate the following enhancements.

1. Three camera modes have been added:
• Tv: Shutter speed is selectable. Iris, Gain and ND Filter* are set automatically.
• Av: Iris is selectable. Shutter speed, Gain and ND Filter* are set automatically.
• AGC: Shutter speed and Iris are selectable. Gain and ND Filter* are set automatically.
2. The following features are enabled for the CN-E18-80mm and T4.4 L IS KAS S:
• Saving and displaying metadata, such as the model name and the focal distance of the lens when attached.
• Support for Peripheral Illumination Correction.
• Manual Iris control via the camera's joystick.
• Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
• One shot autofocus.
• Automatic aperture and push auto iris functions.
• Operation of REC start/stop by the separately-sold ZSG-C10.
3. Adds Peripheral Illumination Correction for the following lenses:
• EF 100-400mm f/4.5-5.6L IS II USM
• EF 35mm f/1.4L II USM
• EF 24-105mm f/4L IS II USM
4. Adds chroma-key correction function.
5. Adds three white balance modes when the camera is set to Auto: custom White Balance Set, Preset and Color temperature.
6. Adds 25PsF on output format.
7. Adds [59.94P(i)]* and [50.00P(i)]** output setting for Monitor terminal.
• When the frame rate is set to 59.94P (NTSC) or 50.00P (PAL), the 3G/HD-SDI 1 / MONITOR terminal can be set to output interlaced signal.

Download: Canon ME20F-SH Firmware v.1.0.3.1.00
Download: Canon ME200S-SH Firmware v.1.0.1.1.00

B&H carries the following:

• Canon EOS C700
• Canon EOS C100 Mark II
• Canon EOS C100
• Canon EOS C100 DPAF
• Canon XC10
• Canon XC15
• Canon ME20F-SH
• Canon ME200S-SH

From Canon USA:

Thank you for using Canon products.

The latest firmware for the Connect Station CS100 is now available. In order to update the firmware, the CS100 device must be connected to the Internet. Please see detailed instructions below.

Details

Firmware Version 2.5.1 incorporates the following enhancements:

• Movie upload functionality with the Connect Station App has been added. *1,*2,*3,*4
• Ability to [Send/receive images] between a mobile device and the Connect Station CS100 outside of a home network has been enabled. (Internet connection required) *1
• Support for more image sources and file types has been added. See instruction manual for Connect Station CS100 for more details. *1
• Decreased the time necessary to [Copy multiple images].
• [Loop playback] functionality has been added.
• A [Disable] option to the [Auto standby] setting in the [Preferences] menu has been added. *5

*1 Requires the latest version of the Connect Station App to be installed on the mobile device.
*2 Proper playback is not guaranteed with movies captured with a mobile device.
*3 The orientation of the Movies captured with a mobile device can be converted for playback when imported to the Connect Station CS100.
*4 If the movie being imported has UTC (Universal Time Coordinated) date information, then that date information is saved after the movie is imported to the Connect Station CS100. If the footage does not have UTC date information, then the imported date will be the date information for the move file.
*5 When [Auto standby] is set to [Disable], and the monitor is displayed for a prolonged period of time, screen burn-in may occur.

For detailed information about the functions of the Connect Station CS100, please refer to the latest instruction manual which can be found on the Canon Website.

Affected Product

This firmware update is for Connect Station CS100 with Firmware up to Version 2.0.4.

Cautions Regarding Use of the CS100

Movies larger than 4GB captured with the EOS-1D X Mark II cannot be imported to the CS100 using a wired connection. Please use a memory card to transfer such movies.

Cautions while performing the firmware update:

• Before the firmware update, please remove the CF card, SD card, and USB cable.
• Do not turn off the power of the CS100.
• Do not lift up or move the CS100.
• Do not operate the Remote Control CS-RC1.

Firmware Update Procedure

1. Turn on the power of the CS100, and connect the device to the Internet. *For details on how to connect the CS100 to the Internet, please see the user’s manual.
2. Press the [Home] button on the remote control, and check whether [ ! ] appears over the “Preferences” item, and if so, select the “Preferences” item, and then press .
3. Press the [Right] button of Cross keys on the remote control, select the tab in the image below, and after checking that [ ! ] appears next to [Update Firmware], select [Update Firmware], and then press .
4. Press [MENU] on the remote control to start downloading and updating the firmware.

1. Press the [Right] button of Cross keys on the remote control, select the tab in the image below, and check whether the information on the [Update Firmware] screen indicates the latest firmware version.

If you have not already done so, please register your Connect Station CS100. By registering, we will be able to notify you via email about future announcements.

This information is for residents of the United States and its five territories only. If you do not reside in the USA or its five territories, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

B&H carries the Canon Connect Station CS100.

From Canon USA:

Firmware Version 1.1.3 incorporates the following improvements to enhance functions.

• Corrects a phenomenon in which the drive mode icon is not correctly displayed when using custom shooting modes (C1/C2/C3).
• Changes the maximum number of "Release cycles" displayed from 1,000,000 cycles to 9,999,000 cycles. This value can be checked under the "Camera system information" menu.
• Improves the reliability of communication via USB cable when using the Lens Data Registration function within EOS Utility 3 software.

Download: Canon EOS-1D X Mark II Firmware Version 1.1.3

From Canon USA:

Firmware Version 1.0.4 is incorporated with the following correction.

• Enhances the effects of image stabilization when using the EF24-105mm F4L IS II USM with the EOS 5D Mark IV at a shutter speed between 1/100 sec. and 1/160 sec.

Firmware Version 1.0.4 is for lenses with Firmware Version 1.0.3 or earlier.

Lenses whose third digit in the serial number is "0". (xx0xxxxxxx)

If the lens' firmware is already Version 1.0.4, it is not necessary to update the firmware. The lens firmware can be checked through the menu on the EOS 5D Mark IV.

Preparations for the Firmware Update:

In the folder you downloaded are the firmware (file name: EF012104.lfu / file size: 1,441,844 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).

Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.

Download: Canon EF 24-105mm f/4L IS II USM Firmware Version 1.0.4

Canon Cinema EOS C300 (with the Dual Pixel CMOS AF Feature Upgrade applied) v.2.1.8.1.00

Firmware Version 2.1.8.1.00 incorporates the following enhancements:

1. With the CN7x17 KAS S/E1 *1, CN-E18-80mm T4.4 L IS KAS, or CN20x50 IAS H/E1 *1 attached, the following functions are available:
• Autofocus using Dual Pixel CMOS AF is possible (with the exception of CN20x50 IAS H/E1)
• Metadata, such as the model name and focal distance of the lens attached, can be acquired and displayed on the camera. *2
• Peripheral illumination correction is supported. *2
• Aperture can be adjusted manually by operating the camera's Control Dial. *2
• Settings can be made so that the zoom can be operated using the joystick on the grip unit of the camera.
• The zoom/focus*2/iris*2 can be operated using the separately-sold RC-V100 Remote Controller.
• The focus and iris can be operated via Wi-Fi Remote. *2
• The automatic aperture and Push Auto Iris functions can be used.
2. Support for the WFT-E8 has been added.
3. Support for peripheral illumination correction when the EF 24-105mm f/4L IS II USM is attached has been added.

Download: Canon EOS C300 Firmware Version 2.1.8.1.00

Firmware Version 1.1.8.1.00 incorporates the following enhancements:

For EOS C300 EF only

1. With the CN7x17 KAS S/E1 *1, CN-E18-80mm T4.4 L IS KAS, or CN20x50 IAS H/E1 *1 attached, the following functions are available:
• Metadata, such as the model name and focal distance of the lens attached, can be acquired and displayed on the camera. *2
• Peripheral illumination correction is supported. *2
• Aperture can be adjusted manually by operating the camera's Control Dial. *2
• Settings can be made so that the zoom can be operated using the joystick on the grip unit of the camera.
• The zoom/focus*2/iris*2 can be operated using the separately-sold RC-V100 Remote Controller.
• The focus and iris can be operated via Wi-Fi Remote.*2
• The automatic aperture and Push Auto Iris functions can be used.
2. Support for peripheral illumination correction when the EF 24-105mm f/4L IS II USM is attached has been added.

1. Support for the WFT-E8 has been added.

Download: Canon Cinema EOS C300 / EOS C300 PL Firmware v.1.1.8.1.00

Firmware Version 1.0.6.1.00 incorporates the following fixes and enhancements:

1. Support for the OLED Electronic Viewfinder EVF-V70 *1 has been added.
2. Shutter Angle Priority has been added. A constant shutter angle can now be maintained, regardless of any other camera settings being changed.
3. Support for the WFT-E8 has been added.
4. Zebra Range Expanded Below 65%.
• The range of the Zebra 1 setting has been expanded to between 5% (±5%) and 95% (±5%) in steps of 5%.
• The range of the Zebra 2 setting has been expanded to between 5% and 100% in steps of 5%.
5. Built-in Mic Audio Off
• The internal microphone on the camera body can now be turned off.
6. In Browser Remote, the focus guide frame can now be displayed.
7. 2K Crop Audio Recording
• Audio can now be recorded when the camera is set in 2K crop mode.
8. Support for CFast cards (VPG130) has been added. *2
9. Support for peripheral illumination & chromatic aberration when the EF 24-105mm f/4L IS II USM lens is attached, has been added.
10. Metadata related to the XF-AVC range has been corrected.
• The range of Canon Log/Log2/Log3 has been corrected to full range.
11. The quality of autofocus has been enhanced.
12. The operation reliability after changing the recording mode has been enhanced.

Download: Canon EOS C300 Mark II / EOS C300 Mark II PL Firmware Version 1.0.6.1.00

B&H carries the Canon EOS C300 and C300 Mark II.

Canon has issued a number of DSLR firmware updates to address a lens correction profile bug relating to the EF 70-300mm f/4-5.6 IS II USM.

From the Canon EOS 6D firmware update:

Corrects a phenomenon in which when using the camera with the EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.

From Canon USA:

Firmware Version 1.0.3 incorporates the following fixes and improvements:

• Corrects a phenomenon in which the color of images varies depending on the metering mode selected during flash shooting.
• Improves the reliability of communication when using the EF1.4X III or EF2X III extender.
• Corrects the level display when the camera is held in the vertical orientation with the hand grip pointing downward.
• Improves the reliability of communication via USB cable when using the Lens Data Registration function with EOS Utility 3.

Firmware Version 1.0.3 is for cameras with firmware Version 1.0.2 or earlier. If your camera's firmware is already Version 1.0.3, it is not necessary to update the firmware. When updating the firmware of your camera, please review the instructions thoroughly before you update the firmware. The firmware update takes approximately 4 minutes.

Download: Canon EOS 5D Mark IV Firmware Version 1.0.3

B&H has the Canon EOS 5D Mark IV in stock.

From Canon USA:

MELVILLE, N.Y., November 9, 2016 – Canon U.S.A., Inc., a leader in digital imaging solutions, today announced firmware updates for both the Canon EOS C300 and EOS C300 Mark II Digital Cinema Cameras being showcased at NAB Show New York 2016, November 9 and 10 at the Jacob K. Javits Center in New York City. These firmware updates support a number of feature updates for users including improvement of accessory support, ease of use, Dual Pixel CMOS AF (DAF) and creative flexibility.

Firmware updates are as follows:

• The EOS C300 Mark II Digital Cinema Camera (EF-Mount) updates will allow various functions such as support for the Canon EVF-V70 OLED Electronic Viewfinder, WFT-E8 Wireless File Transmitter, Shutter Angle Priority, support for Zebra range at 65 percent or below, 2K Crop Audio Recording, Built-In Mic Audio off, and Peripheral Illumination Correction when using the new EF 24-105mm f/4L IS II USM lens.
• The EOS C300 Mark II Digital Cinema Camera (PL-Mount) updates will allow various functions such as support for the Canon EVF-V70 OLED Electronic Viewfinder, WFT-E8 Wireless File Transmitter, Shutter Angle Priority, support for Zebra range at 65 percent or below, 2K Crop Audio Recording, and Built-In Mic Audio off.
• The EOS C300 Digital Cinema Camera (EF-Mount) updates will allow various functions such as support for the WFT-E8 Wireless File Transmitter, Shutter Angle Priority, Grip Zoom Function when using CINE-SERVO 17-120mm EF-mount, CINE-SERVO 50-1000mm EF-Mount and COMPACT SERVO 18-80mm lenses, Auto Iris and Push Iris when using CINE-SERVO 17-120mm EF-mount, CINE-SERVO 50-1000mm EF-Mount and COMPACT SERVO 18-80mm lenses and Peripheral Illumination Correction when using the new EF 24-105mm f/4L IS II USM lens.
• The EOS C300 Digital Cinema Camera DAF (EF-Mount) updates will allow various functions such as support for the WFT-E8 Wireless File Transmitter, Shutter Angle Priority, Dual Pixel CMOS AF (DAF) when using CINE-SERVO 17-120mm EF-Mount and COMPACT SERVO 18-80mm lenses, Grip Zoom Function when using CINE-SERVO 17-120mm EF-mount, CINE-SERVO 50-1000mm EF-Mount and COMPACT SERVO 18-80mm lenses, Auto Iris and Push Iris when using CINE-SERVO 17-120mm EF-mount, CINE-SERVO 50-1000mm EF-Mount and COMPACT SERVO 18-80mm lenses and Peripheral Illumination Correction when using the new EF 24-105mm f/4L IS II USM lens.
• The EOS C300 Digital Cinema Camera (PL-Mount) updates will allow various functions such as support for the WFT-E8 Wireless File Transmitter and Shutter Angle Priority.

To learn more about the firmware updates, please visit usa.canon.com/nabny2016firmware.

These firmware updates are scheduled to be available on December 13, 2016.

B&H carries the EOS C300 and EOS C300 Mark II.

From Canon USA:

Firmware Version 1.1.0 incorporates the following enhancement:

• Support for the Wi-Fi Adapter W-E1 has been added.

When updating the firmware of your camera, please review the instructions thoroughly before you update the firmware. The firmware update takes approximately 6 minutes. Please note that the firmware for EOS 5DS R and EOS 5DS is different. Notes:

1. The firmware cannot be updated when the Wi-Fi Adapter W-E1 is inserted into the camera.
2. Once the camera is updated to Version 1.1.0, it cannot be restored to a previous firmware version (Version 1.0.1).
3. EOS 5DS R cameras with Firmware Version 1.1.0 require the latest version of EOS Utility and Camera Connect.
• EOS Utility Version 3.5.0 or later can be downloaded from our Web site.
• Camera Connect 1.3.10 or later can be downloaded from App Store or Google Play.
• Versions of application software that support Firmware Version 1.1.0 of the camera
• EOS Utility Version 3.5.0 or later
• Camera Connect 1.3.10 or later
  * EOS Utility is supported on the following OSes:
  Windows 10 / 8.1 / 7 SP1, Mac OS X v10.9 / 10.10 / 10.11
  * Camera Connect is supported on the following OSes:
  iOS 8.4 / 9.3, Android 4.1-4.4 / 5.0-5.1 / 6.0
4. Download the latest version of the Instruction Manual which contains information regarding the enhancements provided in this firmware update.

B&H carries the Canon EOS 5Ds and 5Ds R DSLR cameras. They also have the Canon W-E1 Wi-Fi Adapter available for preorder.

Firmware Version 2.0.2 incorporates the following fixes:

1. Corrects a phenomenon in which, in rare cases, the digital compass is not displayed and the location information is not updated when using the GP-E2 through the USB connection.
2. Corrects a phenomenon in which, in rare cases, the GPS log's time information will show the date of the next day.

When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.

Please note: Do not downgrade the firmware of the product to Version 2.0.1 or earlier after updating to Version 2.0.2. To update the firmware of this product, Map Utility that is bundled with the product is required. Furthermore, before updating the firmware, use Map Utility to save the GPS log files in the built-in memory to your computer. After the GPS log files are saved to your computer, make sure to delete the log files from the built-in memory of the GPS receiver before updating the firmware.

Download: Canon GPS Receiver GP-E2 Firmware v.2.02

B&H carries the Canon GPS Receiver GP-E2.

From Canon:

Firmware Version 1.0.2 incorporates the following improvement.

• Improves communication reliability when using EOS Utility to register/update* new Digital Lens Optimizer.

Download: Canon EOS 5D Mark IV Firmware v.1.0.2

Adorama has the Canon EOS 5D Mark IV in stock. Amazon expects to have the 5D IV in stock on October 1.

Canon has released five new camera firmwares with the following update:

Corrects a phenomenon in which when using the camera with the EF-S 18-135mm f/3.5-5.6 IS USM or EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.

Canon Firmware Updates

• Canon EOS 6D (v.1.1.7)
• Canon EOS 70D (v.1.1.2)
• Canon EOS SL1 (v.1.0.1)
• Canon EOS Rebel T5i (v.1.1.5)
• Canon EOS Rebel T6 (v.1.0.2)

Note: Canon EOS 6D users should note the following in the firmware update details:

If the firmware is updated from version 1.1.6 or before, the following setting will be reset to default.
Menu > Custom Function> C.Fn II: Autofocus > AF Microadjustment> 1: All by same amount

• EOS-1D X
• EOS-1D Mark IV
• EOS 5D Mark III
• EOS 7D
• EOS 60D
• EOS Rebel T1i
• EOS Rebel T2i
• EOS Rebel T3i
• EOS Rebel T4i
• EOS Rebel T3
• EOS Rebel T5
• EOS M
• EOS M2

Firmware Version 1.1.2 incorporates the following improvements to enhance functions.

1. The addition of a selectable color-tone option for the LCD monitor.
2. The addition of a function to append IPTC data.
3. The addition of a function to transfer only protected images.
4. The addition of a function to set the GPS positional data retention period.
5. An increase in the number of network connection settings that can be saved to a memory card from 20 to 40.
6. When retrying FTP transfer, extension of the minimum auto power off time to 10 minutes.
7. Improvement of wireless transmission when using Wireless File Transmitter WFT-E6.

Notes:

1. Once the camera is updated to Version 1.1.2, it cannot be restored to a previous firmware version (Version 1.0.0 / 1.0.2).
2. "Camera setting files" generated on a camera with Firmware Version 1.0.2 or earlier cannot be used on a camera with Firmware Version 1.1.2 or later.
3. EOS-1D X Mark II cameras with Firmware Version 1.1.2 require the latest version of EOS Utility. EOS Utility Version 3.5.0 or later can be downloaded from our Web site.
   *EOS Utility Version 3.5.0 is supported on the following OSes:
   Windows 10 / 8.1 / 7 SP1, Mac OS X v10.9 / 10.10 / 10.11
4. Download the latest version of the Instruction Manual which contains information regarding the enhancements provided through this firmware update.

With the Canon W-E1 Wi-Fi Adapter scheduled to begin shipping today, I expected that new firmwares for compatible DSLRs would be available this morning. However, while a new 7D Mark II firmware was easy to locate, I was surprised to find the EOS 5Ds / 5DS R firmware update missing.

Then I came across the actual firmware update announcement from Canon Japan for the 5Ds / 5Ds R (published in late August) which explains that the ultra-high resolution bodies' new firmwares are planned for a November release.

So it looks like all the 5Ds and 5Ds R customers who preordered the W-E1 will have to wait a couple of months before they can use the [hopefully] nifty little device. Why Canon failed to have the new firmware available at the time of the W-E1's release is unknown.