Canon Firmware Updates (Page 8) RSS Feed for Canon Firmware Updates

 Wednesday, March 28, 2018

Canon is apparently releasing firmware updates for several its Cinema cameras; unfortunately, the udpates aren't available just yet at Canon USA (but I expect they will be soon). To read about the firmware updates, check out this article on the Canon Digital Learning Center.

Listed below are the notable changes.

EOS C300 Mark II / C300 Mark II PL v.1.1.1.1.00

  • Touch-Panel Sensitivity Adjustment
  • Lens Metadata Information (XF-AVC)
  • Auto Iris support has been added for the following lenses:
    • EF-S 35mm f/2.8 Macro IS STM
    • EF-85mm f/1.4L IS USM

EOS C200 / EOS C200B v.1.0.3.1.00

  • MXF (XF-AVC) Support
  • Progressive Segmented Frame Support
  • Magnification Support (4x Recording)
  • 24-bit LPCM Audio Support in Cinema RAW Light
  • Digital Tele-Converter (1.5x, 3.0x, 6.0x)
  • HLG (Hybrid Log Gamma) Support (Output Only)
  • Lens Metadata Information (XF-AVC)
  • Touch-Panel Sensitivity Adjustment
  • Auto Iris support has been added for the following lenses:
    • EF-S 35mm f/2.8 Macro IS STM
    • EF 85mm f/1.4L IS USM

  • Correction for Peripheral Illumination and Chromatic Aberration for the following lenses:
    • EF 70-300mm f/4-5.6 IS II USM
    • EF 16-35mm f/2.8L III USM
    • EF-S 18-55mm f/4-5.6 IS STM
    • EF-S 35mm f/2.8 Macro IS STM
    • EF 85mm f/1.4L IS USM

  • Enhancements
    • The image reproducibility in bright areas has been enhanced when the gamma setting is from Normal 1 to 4.
    • Enhances menu operations so that the Browser Remote setting options are retained after switching off the camera.

XF405 / XF400 v.1.0.1.0.00

  • MXF (XF-AVC) Support
  • Flicker Reduction

EOS C700 / EOS C700 PL / EOS C700 GS PL v.1.0.5.1.00

  • Super 16mm (2K Crop) Recording Mode Added
  • RAW Recorder Voltage Indicator
  • Lens Metadata Information (XF-AVC)
  • Metadata (Model distinction metadata of C700 GS PL has been added)
  • Saved Settings Fix

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 3/28/2018 9:39:36 AM ET   Posted By: Sean
 Tuesday, March 6, 2018

Canon USA has released firmware updates for the following lenses to enable support for the Dual Sensing IS function found in the EOS M50.

B&H has the Canon EOS M50 available for preorder.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 3/6/2018 2:12:31 PM ET   Posted By: Sean
 Monday, January 15, 2018

From Canon USA:

Thank you for using Canon products.

Firmware Version 1.4.1 incorporates the following improvements and fixes:

  • Changes the maximum number of “Release cycles” displayed from 1,000,000 cycles to 9,999,000 cycles. This value can be checked under the “Camera system information” menu.
  • Fixes a phenomenon in which a synchronization failure may occur during multiple flash shooting.
  • Fixes a phenomenon in which Error 80 occurs depending on the shutter release timing.

Firmware Version 1.4.1 includes all improvements and fixes provided in previous firmware versions.

Support

Canon USA will perform this Firmware Update on the EOS-1D C Cinema EOS Camera free of charge. Shipping and handling charges may apply. Please contact the Canon Customer Support Center for details.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Please register the EOS-1D C. By registering, we will be able to notify you via email when future Firmware Updates become available for download. If you already registered, please ensure you are opted-in to receive the notification.

Thank you,
Customer Support Operations
Canon U.S.A., Inc.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 1/15/2018 6:34:36 AM ET   Posted By: Sean
 Tuesday, December 19, 2017

From Canon USA:

Canon Cinema EOS C100 & EOS C300

Cinema EOS C100 (with the Dual Pixel CMOS AF Feature Upgrade applied) Firmware Version 2.0.9.1.00 and EOS C300 (with the Dual Pixel CMOS AF Feature Upgrade applied) Firmware Version 2.1.9.1.00 incorporates the following corrections:

  • When CN-E70-200mm T4.4 L IS KAS S is attached the following features are enabled:
    • Autofocus using the Dual Pixel CMOS AF function
    • The joystick on the camera's grip unit can be set to operate the zoom.
    • Manual control of the iris with Camera's Control dial.
    • Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
    • Automatic aperture and push auto iris functions.
    • Start/stop recording on the separately-sold lens grip ZSG-C10.
    • Retrieval of Lens metadata, such as the model name and the focal distance will display on the camera.

  • When the camera is turned off the IS mechanical lock will be active regardless of the position of the switch.
  • Adds peripheral illumination correction for the following lenses:
    • CN-E70-200mm T4.4 L IS KAS S
    • EF 70-300mm f/4-5.6 IS II USM
    • EF 16-35mm f/2.8L III USM
    • EF-S 18-55mm f/4-5.6 IS STM
    • EF-S 35mm f/2.8 Macro IS STM
    • EF 85mm f/1.4L IS USM

Download:
Canon Cinema EOS C100 (with the Dual Pixel CMOS AF Feature Upgrade applied) Firmware Version 2.0.9.1.00
Canon EOS C300 (with the Dual Pixel CMOS AF Feature Upgrade applied) Firmware Version 2.1.9.1.00



Canon EOS C300 Mark II

Canon Digital Cinema Camera EOS C300 Mark II / EOS C300 Mark II PL Firmware Version 1.1.0.1.00 incorporates the following fixes and enhancements:

  • Support for LCD monitor LM-V1*1,2 (separately sold) has been added.
  • Peripheral illumination/chromatic aberration correction has been added for the following lenses:
    • EF-S 18-55mm f/4-5.6 IS STM
    • EF-S 35mm f/2.8 Macro IS STM
    • EF 85mm f/1.4L IS USM

Download: Canon Digital Cinema Camera EOS C300 Mark II Firmware Version 1.1.0.1.00



Canon ME200S-SH

Canon ME200S-SH Firmware Version 1.0.2.1.00 incorporates the following enhancements:

  • The following features are enabled for the CN-E70-200mm T4.4 L IS KAS S:
    • Autofocus using the Dual Pixel CMOS AF function.
    • Displaying the model name of the lens when attached.
    • Support for Peripheral illumination correction.
    • Manual control of the iris with camera's joystick.
    • Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
    • Automatic aperture and push auto iris functions.
    • Start/stop recording on the separately-sold lens grip ZSG-C10.

  • Adds Peripheral Illumination Correction for the following lenses:
    • EF 70-300mm f/4-5.6 IS II USM
    • EF 16-35mm f/2.8L III USM
    • EF-S 35mm f/2.8 Macro IS STM
    • EF 85mm f/1.4L IS USM

  • Adds [NU protocol] to the other functions setting:
    • [Other Functions] > [REMOTE B Term.] > [NU Protocol]

  • When the camera is turned off the IS mechanical lock will be active regardless of the position of the switch.

Download: Canon ME200S-SH Firmware Version 1.0.2.1.00

B&H carries the Canon EOS C100, Canon EOS C300, Canon EOS C300 Mark II and ME200S-SH.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 12/19/2017 6:17:21 AM ET   Posted By: Sean
 Friday, December 1, 2017

Canon has issued a product advisory for the EOS 5D Mark IV to alert customers of a delay in the release of a firmware update.

From Canon USA:

We would like to inform you that release of firmware to enhance functions of the EOS 5D Mark IV, which was originally scheduled for November 29 at the same timing as the firmware updates for six other models (EOS-1D X Mark II: Ver.1.1.4; EOS-1D X: Ver.2.1.0; EOS 5D Mark III: Ver.1.3.5; EOS 5DS: Ver.1.1.2; EOS 5DS R: Ver.1.1.2; EOS 6D Ver. 1.1.8), has been postponed until late February 2018 for reasons related to firmware preparation. We would like to offer our sincere apologies to users of this product who have been inconvenienced.

In the firmware to enhance functions of the EOS 5D Mark IV, we are planning to incorporate the following enhancements:

  • Support will be added for chromatic aberration correction, peripheral illumination correction, distortion correction, and Digital Lens Optimizer when using Digital Photo Professional to process RAW images captured with the following TS-E lenses: TS-E 17mm f/4L, TS-E 24mm f/3.5L II, TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO.
  • Support will be added to fix a phenomenon* in which standard exposure may not be obtained, or an irregular exposure may result, when Silent LV (Live View) shooting with the following TS-E lenses: TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO.
  • Support for Exif 2.31 will be added.

*This phenomenon occurs when tilt or shift is applied on a TS-E lens (TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO) during LV shooting when Silent LV shooting is set (set to Mode 1 or Mode 2 on the menu). For this reason, until the firmware update, when performing viewfinder shooting or LV shooting, please shoot with the Silent LV shooting set to [Disable].

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Post Date: 12/1/2017 3:04:17 PM ET   Posted By: Sean
 Thursday, November 30, 2017

From Canon USA:

Canon EOS-1D X

Firmware Version 2.1.0 incorporates the following improvement and fixes:

  • Fixes a phenomenon in which standard exposure may not be obtained, or an irregular exposure may result, when Silent LV (Live View) shooting with the following TS-E lenses: TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO.
  • Changes the maximum number of "Release cycles" displayed from 1,000,000 cycles to 9,999,000 cycles. This value can be checked under the "Camera system information" menu.
  • Fixes a phenomenon in which a synchronization failure may occur during multiple flash shooting.
  • Fixes a phenomenon in which Error 80 occurs depending on the shutter release timing.

Download: Canon EOS-1D X Firmware v.2.1.0



Canon EOS 6D

Firmware Version 1.1.8 incorporates the following fix:

  • Fixes a phenomenon in which standard exposure may not be obtained, or an irregular exposure may result, when Silent LV (Live View) shooting with the following TS-E lenses: TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO.

Download: Canon EOS 6D Firmware v.1.1.8

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 11/30/2017 1:24:05 PM ET   Posted By: Sean

From Canon USA:

Canon EOS-1D X Mark II

Firmware Version 1.1.4 incorporates the following improvements and fix:

  • Support has been added for chromatic aberration correction, peripheral illumination correction, distortion correction, and Digital Lens Optimizer when using Digital Photo Professional to process RAW images captured with the following TS-E lenses: TS-E 17mm f/4L, TS-E 24mm f/3.5L II, TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO.
  • Fixes a phenomenon in which standard exposure may not be obtained, or an irregular exposure may result, when Silent LV (Live View) shooting with the following TS-E lenses: TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO.
  • Support for Exif 2.31 has been added.

Download: Canon EOS-1D X Mark II Firmware v.1.1.4



Canon EOS 5D Mark III

Firmware Version 1.3.5 incorporates the following fix:

  • Fixes a phenomenon in which standard exposure may not be obtained, or an irregular exposure may result, when Silent LV (Live View) shooting with the following TS-E lenses: TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO.

Download: Canon EOS 5D Mark III Firmware v.1.3.5

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 11/30/2017 11:42:31 AM ET   Posted By: Sean

From Canon USA:

Firmware Version 1.1.2 incorporates the following improvements and fix:

  • Support has been added for chromatic aberration correction, peripheral illumination correction, distortion correction, and Digital Lens Optimizer when using Digital Photo Professional to process RAW images captured with the following TS-E lenses: TS-E 17mm f/4L, TS-E 24mm f/3.5L II, TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO.
  • Fixes a phenomenon in which standard exposure may not be obtained, or an irregular exposure may result, when Silent LV (Live View) shooting with the following TS-E lenses: TS-E 50mm f/2.8L MACRO, TS-E 90mm f/2.8L MACRO, or TS-E 135mm f/4L MACRO.
  • Support for Exif 2.31 has been added.

Download:
Canon EOS 5Ds Firmware v1.1.2
Canon EOS 5Ds R Firmware v1.1.2

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 11/30/2017 5:14:38 AM ET   Posted By: Sean
 Thursday, November 9, 2017

From Canon USA:

Canon EOS C200/EOS C200B

Firmware Version 1.0.2.1.00 incorporates the following enhancements:

When CN-E70-200mm T4.4 L IS KAS S is attached the following features are enabled:

  • Autofocus using the Dual Pixel CMOS AF function
  • Dual Pixel Focus Guide function.
  • The joystick on the camera's grip unit can be set to operate the zoom.
  • Manual control of the iris with Camera's Control dial.
  • Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
  • Automatic aperture and push auto iris functions.
  • Start/stop recording on the separately-sold lens grip ZSG-C10.
  • Retrieval of Lens metadata, such as the model name and the focal distance will display on the camera.
  • Peripheral illumination / chromatic aberration correction.

Download: Canon EOS C200/EOS C200B Firmware v.1.0.2.1.00

B&H carries the Canon EOS C200 Cinema Camera.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 11/9/2017 10:38:35 AM ET   Posted By: Sean
 Wednesday, November 8, 2017

Canon USA has an updated firmware available for the EOS 6D Mark II (review). See below for details.

Firmware Version 1.0.3 incorporates the following fix:

  • Corrects an erroneous display that may appear when some third-party accessories are attached to the hot shoe.

Download: Canon EOS 6D Mark II Firmware v.1.0.3

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 11/8/2017 8:41:50 AM ET   Posted By: Sean
 Friday, September 29, 2017

From Canon USA:

Firmware Version 1.0.1.1.00 incorporates the following fix:

  • Fixes a phenomenon in which the start time code is not correctly displayed when MP4 clips captured at 59.94P/50.00P frame rate are imported into NLE software.

*RAW clips are not affected.

Caution:

  • You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 128MB or more for the firmware update.
  • Firmware version 1.0.1.1.00 is for updating Cinema EOS C200 cameras running firmware version 1.0.0.1.00. If your camera's firmware is already version 1.0.1.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.

Download: Canon EOS C200 Firmware v.1.0.1.1.00

B&H carries the Canon EOS C200 Cinema Camera.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 9/29/2017 11:58:30 AM ET   Posted By: Sean
 Wednesday, August 30, 2017

Canon has released firmware updates for the EOS C300 Mark II and C100 Mark II Cinema cameras. See below for details.

Canon EOS C300 Mark II / EOS C300 Mark II PL Firmware Version 1.0.9.1.00

Firmware Version 1.0.9.1.00 incorporates the following fixes and enhancements:

  • When CN-E70-200mm T4.4 L IS KAS S is attached the following features are enabled:
    • Autofocus using the Dual Pixel CMOS AF function.
    • Dual Pixel Focus Guide function.
    • The joystick on the camera's grip unit can be set to operate the zoom.
    • Manual control of the iris with Camera's Control dial.
    • Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
    • Automatic aperture and push auto iris functions.
    • Start/stop recording on the lens grip.
    • Retrieval of Lens metadata, such as the model name and the focal distance will display on the camera.

  • Allows the position of waveform monitor to be changed on the display.
  • Adds peripheral illumination/chromatic aberration correction for the following lenses:
    • COMPACT-SERVO Lens [CN-E70-200mm T4.4 L IS KAS S]
    • EF Lens [EF 70-300mm f/4-5.6 IS II USM], [EF 16-35mm f/2.8L III USM]

  • When [Face Only] is active, the icon will change from gray to white when a face is not detected.
  • When the camera is turned off the IS mechanical lock will be active regardless of the position of the switch.
  • Fixes the list of shutter speed on the display when using Browser Remote.

Download: Canon EOS C300 Mark II Firmware v.1.0.9.1.00



Canon EOS C100 Mark II Firmware Version 1.0.5.1.00

Firmware Version 1.0.5.1.00 incorporates the following enhancements:

  • When CN-E70-200mm T4.4 L IS KAS S is attached the following features are enabled:
    • Autofocus using the Dual Pixel CMOS AF function.
    • The joystick on the camera's grip unit can be set to operate the zoom.
    • Manual control of the iris with Camera's Control dial.
    • Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
    • Automatic aperture and push auto iris functions.
    • Start/stop recording on the lens grip.
    • Retrieval of Lens metadata, such as the model name and the focal distance will display on the camera.

  • Adds peripheral illumination correction for the following lenses.
    • COMPACT-SERVO Lens [CN-E70-200mm T4.4 L IS KAS S]
    • EF Lens [EF 70-300mm f/4-5.6 IS II USM], [EF 16-35mm f/2.8L III USM]

  • When [Face Only] is active, the icon will change from gray to white when a face is not detected.
  • When the camera is turned off the IS mechanical lock will be active regardless of the position of the switch.

Download: Canon EOS C100 Mark II Firmware v.1.0.5.1.00

B&H carries the Canon EOS C300 Mark II and C100 Mark II Cinema cameras.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News, Sony News   Category: Canon Firmware Updates
Post Date: 8/30/2017 10:11:08 AM ET   Posted By: Sean
 Thursday, June 29, 2017

From Canon:

Firmware Version 2.5.2 incorporates the following fix:

  • The CS100 will not start-up when it is connected to a network via a fixed IP address and has been continuously powered on for 2 months or more has been fixed.

Affected Product

  • This firmware update is for Connect Station CS100 with Firmware up to Version 2.5.1.

Cautions Regarding Use of the CS100

Movies larger than 4GB captured with the EOS-1D X Mark II cannot be imported to the CS100 using a wired connection. Please use a memory card to transfer such movies.

Firmware Update Procedure

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 6/29/2017 7:08:35 AM ET   Posted By: Sean
 Friday, June 16, 2017

From Canon:

Firmware Version 1.1.1 incorporates the following fixes

  • Corrects a phenomenon in which shooting may not be completed while using HDR (High Dynamic Range) Mode, when certain combinations of settings are selected.
  • Corrects the phenomenon of Err70 which occurs with certain combinations of settings.
  • Corrects the level display when the camera is held in the vertical orientation with the hand grip pointing downward.
  • Corrects a phenomenon in which, when using certain CF cards, it may take approximately five seconds for the camera to power on depending on when the camera's power switch was turned ON.

Download:
Canon EOS EOS 5Ds Firmware v.1.1.1
Canon EOS EOS 5Ds R Firmware v.1.1.1

B&H carries the Canon EOS 5Ds and 5Ds R DSLR cameras.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 6/16/2017 6:29:52 AM ET   Posted By: Sean
 Friday, June 2, 2017

From Canon USA: Canon EOS 7D Mark II Firmware v.1.1.2

Firmware Version 1.1.2 incorporates the following fix:

  • Corrects the phenomenon in which remote shooting with the Camera Connect App is not possible after connecting the EOS 7D Mark II to a smartphone via the Wi-Fi Adapter W-E1.

*This phenomenon only occurs when the firmware was updated from Version 1.0.5 or earlier to Version 1.1.1. There is no need to update the firmware if the firmware was updated from Version 1.1.0 to Version 1.1.1, or if the EOS 7D Mark II was equipped with Firmware Version 1.1.1 at the time of purchase.

Download: Canon EOS 7D Mark II Firmware v.1.1.2

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 6/2/2017 11:54:16 AM ET   Posted By: Sean
 Thursday, May 18, 2017

From Canon USA:

Service Notice: Remote shooting with Camera Connect App with camera running Firmware Version 1.1.1

Thank you for using Canon products.

A communication error has been discovered when using the EOS 7D Mark II running Firmware Version 1.1.1, which version was released on April 27, 2017, in combination with the Wi-Fi Adapter W-E1.

We sincerely apologize for any inconvenience caused to customers, and we ask for your ongoing patience.

Phenomenon

Remote shooting with the Camera Connect App is not possible after connecting the EOS 7D Mark II to a smartphone via the Wi-Fi Adapter W-E1.

Affected Product

EOS 7D Mark II Digital SLR Camera: Units that have been updated from Firmware Version 1.0.5 or earlier to Firmware Version 1.1.1

*This phenomenon will not occur if the camera meets either of the two conditions below:

  • If the camera has been updated from Firmware Version 1.1.0 to Firmware Version 1.1.1.
  • If the camera was already equipped with Firmware Version 1.1.1 at the time of purchase.

We are currently making preparations to correct this phenomenon with the release of a firmware update in early June. In the meantime, please use the workaround method described below.

Workaround

  • Firmware Version 1.1.1 will no longer be available for download, and Firmware Version 1.1.0 will be made available for download again.Users whose camera is affected by this phenomenon are asked to download Firmware Version 1.1.0 and install Firmware Version 1.1.0 onto the camera. Download Firmware Version 1.1.0 from the Canon USA website.
  • If you want the improvements and fixes provided in Firmware Version 1.1.1* applied to your camera, please contact the Canon Customer Support Center in your region and make a request for your camera to be re-updated to Firmware Version 1.1.1.
  • *Improvements and fixes provided in Firmware Version 1.1.1:
    • Enhances reliability of communications when transferring images using Wireless File Transmitter WFT-E7A.
    • Corrects the phenomenon of Err70 which occurs with certain combinations of settings.
    • Corrects the very rare phenomenon in which the shutter can no longer be released.
    • Enhances reliability of operations for specific custom function settings.

Support

If you have not already done so, please register the EOS 7D Mark II. By registering, we will be able to notify you via email about future announcements.

This information is for residents of the United States and its five territories only. If you do not reside in the USA or its five territories, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Post Date: 5/18/2017 1:13:40 PM ET   Posted By: Sean
 Tuesday, May 16, 2017

From Canon USA:

Thank you for using Canon products.

For EOS C300 Mark II/EOS C300 Mark II PL Digital Cinema Cameras equipped with firmware Version 1.0.6.1.00, we have confirmed a phenomenon in which, depending upon the usage conditions, the camera freezes when a VPG 130 CFast card is used simultaneously with a non VPG130 CFast card.

Firmware Version 1.0.7.1.00 (or later) resolves this phenomenon.

We sincerely apologize for the inconvenience caused to customers, and we ask for your ongoing patience.

Phenomenon

When a VPG130 CFast card is used simultaneously with a non VPG130 CFast card the camera may freeze. If the camera freezes, even if the live view image is displayed, all buttons and switches, including the POWER switch, will no longer respond, and the footage will not be recorded on the cards. (The time code and the recording indicator may continue to work.)

The camera can be released from the freeze condition by detaching it from the power supply (or removing the battery).

Affected Products

EOS C300 Mark II/EOS C300 Mark II PL Digital Cinema Cameras (with Firmware V1.0.6.1.00).

Support

Firmware Version 1.0.7.1.00 (or later) resolves this phenomenon.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 5/16/2017 7:16:19 AM ET   Posted By: Sean
 Tuesday, May 9, 2017

From Canon UK:

Firmware Version 1.0.1 incorporates the following fixes:

  • Corrects a phenomenon in which, when the playback grid is set to "6x4", and a vertical image is displayed, or a horizontal image is rotated to be displayed vertically, the grid does not display correctly.
  • In languages other than Japanese, the phrase "no. of shots" has been corrected to "value" in the "Time-lapse movie settings > Interval/Shots" setting screen.

Firmware Version 1.0.1 is for cameras with firmware up to Version 1.0.0. If the camera's firmware is already Version 1.0.1, it is not necessary to update the firmware.

Download: Canon EOS M5 Firmware v1.0.1

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 5/9/2017 7:10:29 AM ET   Posted By: Sean
 Thursday, April 27, 2017

Update: Canon EOS 7D Mark II Firmware v.1.1.1 is no longer unavailable due to a W-E1 communication error bug.

Original Post:

Canon EOS 7D Mark II firmware v.1.1.1 has been released. See details below. (thanks Trent)

From Canon USA:

Firmware Version 1.1.1 incorporates the following improvement and fix:

  • Enhances reliability of communications when transferring images using Wireless File Transmitter WFT-E7 (A/B/C/D/E).
  • Corrects the phenomenon of Err70 which occurs with certain combinations of settings.
  • Corrects the phenomenon in which in very rare cases the shutter can no longer be released.
  • Enhances reliability of operations for specific custom function settings.

Download: Canon EOS 7D Mark II Firmware v.1.1.1

B&H carries the Canon EOS 7D Mark II DSLR Camera.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 4/27/2017 8:15:31 PM ET   Posted By: Sean
 Friday, April 21, 2017

From Canon USA:

New Firmware Delivers Enhanced Digital Cinema Camera Connectivity and Improved Shooting-Assist Functions for HDR Video

MELVILLE, N.Y., April 20, 2017 – Demonstrating Canon’s continued commitment to supporting the digital cinema and television broadcasting industries, Canon U.S.A. Inc., a leader in digital imaging solutions, today announced that its parent company, Canon Inc. and Canon Marketing Japan Inc., will make available free firmware upgrades for three of its professional 4K displays—the DP-V1710, DP-V2410 and DP-V2420 in June 2017.

New features include:

  • Enhanced connectivity with Canon digital cinema cameras

The new firmware updates permit 4K RAW video captured using the EOS C700 or the EOS C700 GS PL (scheduled to be released July 2017) to be viewed directly on the display using only a 3G-SDI cable, without the need for an external transitional device. The firmware also makes possible the acquisition of all image data from video captured using the EOS C700, EOS C700 GS PL as well as the EOS C300 Mark II, enabling the display of image setting values from the connected camera and metadata.

Furthermore, these updates enable the display of the cinema aspect ratio 2.39:1 for specialized shooting using a digital cinema camera equipped with an anamorphic lens. The addition of these new features delivers enhanced user convenience when confirming images during shooting

  • Improved connectivity with ARRI digital cinema cameras

Thanks to these new firmware updates, users can simply connect an ARRI digital cinema camera to the DP-V1710, DP-V2410 or DP-V2420 4K Professional Display Models and view LOG C video in HDR. It is also no longer necessary to add an LUT to confirm video, for improved ease of use.

  • Expanded shooting-assist functions for HDR video

The new updates make possible the display of 4K video in both HDR and SDR (Standard Dynamic Range) simultaneously, using a vertical split-screen mode. What’s more, the updates make possible the downscaling and parallel display of 4K video as two separate images, enabling side-by-side comparisons of HDR and SDR images or HDR images and images with HDR shooting-assist functions applied.

Additionally, colors can now be overlaid on HDR video, with the color depending on the actual luminance of the video area, allowing for the visual confirmation of luminance distribution.

B&H carries the Canon DP-V1710, DP-V2410 and DP-V2420 4K displays.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Firmware Updates
Post Date: 4/21/2017 5:33:28 AM ET   Posted By: Sean
< Previous     1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |    Next >
Archives
2024   Jan   Feb   Mar
2023   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2022   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2021   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2020   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2019   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2018   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2017   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2016   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2015   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2014   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2013   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2012   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2011   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2010   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2009   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2008   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2007   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2006   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2005   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
Terms of Use, Privacy  |  © 2024 Rectangular Media, LLC  |  Bryan CarnathanPowered by Christ!