Corrects a phenomenon in which when using the camera with the EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.Canon DSLR Firmware Updates Available
|EOS-1D Mark IV||1.1.5|
|EOS 5D Mark III||1.3.4|
|EOS Rebel T5i||1.1.5|
|EOS Rebel T4i||1.0.5|
|EOS Rebel T3i||1.0.3|
|EOS Rebel T2i||1.1.0|
|EOS Rebel T1i||1.1.2|
|EOS Rebel T6||1.0.2|
|EOS Rebel T5||1.0.2|
|EOS Rebel T3||1.0.6|
|EOS Rebel SL1||1.0.1|
Corrects a phenomenon in which when using the camera with the EF-S 18-135mm f/3.5-5.6 IS USM or EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.Note that the EOS 6D's updated firmware does not include correction for the [incompatible] EF-S 18-135mm f/3.5-5.6 IS USM.
If the firmware is updated from version 1.1.6 or before, the following setting will be reset to default.Canon is working on additional firmware updates to address the same issue. DSLR firmware updates which have yet to be released include:
Menu > Custom Function> C.Fn II: Autofocus > AF Microadjustment> 1: All by same amount
Based on feedback from large photo organizations, news photojournalists, and so on, Canon has delivered a significant firmware upgrade for the EOS-1D X Mark II camera. Firmware upgrade version 1.1 clearly targets professional users and organizations, but as you’ll see, some of these features may be useful to individual working pros or even serious photography enthusiasts. We’ll examine what’s new in this firmware upgrade in this article.Read the entire article on the Canon Digital Learning Center.
In a nutshell: what’s new and different?
This new upgrade (version 1.1) addresses specific issues that professional news and photojournalism organizations have brought to Canon’s attention — we understand that not all of these will be important in more ordinary, everyday use to individual photographers. That said, the changes and new features that this firmware adds to the EOS-1D X Mark II camera are the ability to:
Keep in mind that the EOS-1D X Mark II differs from other Canon EOS models in that it not only permits network communication and transfer of images via Wi-Fi (using the optional WFT-E8A or WFT-E6A wireless file transmitters), but also via wired ethernet connection — there’s a dedicated ethernet port on the camera for this purpose. This allows similar network connectivity, but without some of the variables users can encounter on-location with Wi-Fi transmission. Firmware v. 1.1 doesn’t change this; we only want to remind users of it here.
- Install up to 39 items of IPTC information into the camera, and to add data (or deliberately not apply it) to images you take
- Add set-up information for up to 40 new Wi-Fi networks to a memory card, and load that data as a full set of possible Wi-Fi networks to select from for connection
- Transfer only “protected” images via Wi-Fi
- Retain GPS position data: Continue to apply last known GPS location information to images subsequently taken, even if GPS connection is lost (photographer went inside a building, etc.)
- Change LCD color tone (four pre-defined settings), to either approximate display from other cameras you’re working with, or to shift color tone based on ambient lighting as the LCD monitor is being used
Deals & Shopping News
Photography Deals (No Deals)
Canon Deals Nikon Deals Sigma Deals Tamron Deals Tokina Deals Adobe Deals Memory Card Deals In Stock Notices
Canon Preorders Nikon Preorders
Canon Refurbished Nikon Refurbished
Canon Rebates Nikon Rebates
Tamron Rebates Sigma Rebates